Dim spot

The diagram above shows the acoustic impedance relationship that results in a dim spot.

In reflection seismology, a dim spot is a local low amplitude seismic attribute anomaly that can indicate the presence of hydrocarbons[1] and is therefore known as a direct hydrocarbon indicator. It primarily results from the decrease in acoustic impedance contrast when a hydrocarbon (with a low acoustic impedance) replaces the brine-saturated zone (with a high acoustic impedance) that underlies a shale (with the lowest acoustic impedance of the three), decreasing the reflection coefficient.

Occurrence

For a dim spot to occur, the shale has to have a lower acoustic impedance than both the water sand and the oil/gas sand, which is the opposite situation required for a bright spot to occur. This is possible because compaction causes the acoustic impedances of sands and shales to increase with age and depth but it does not happen uniformly – younger shales have a higher acoustic impedance than younger sands, but this reverses at depth, with older shales having a lower acoustic impedance than older sands.[2]

Similarly to bright spots, not all dim spots are caused by the presence of hydrocarbons and therefore they should not be treated as conclusive evidence hydrocarbon accumulations.

See also

References

  1. ↑ Schlumberger: Oilfield Glossary
  2. ↑ Brown, Alistar. R., (2010), “Dim Spots in Seismic Images as Hydrocarbon Indicators”, AAPG Search and Discovery Article #40514.
This article is issued from Wikipedia - version of the Friday, May 29, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.