Direct impingement

Direct impingement is a type of gas operation for a firearm that directs gas from a fired cartridge directly into the bolt carrier or slide assembly to cycle the action.

Evaluation

Direct impingement tends to be lighter and shorter due to its method of operation, but exchanges this for being dirtier due to exposing more moving parts to fouling from propellant gases and potentially less reliable as a result.

Unlike conventional gas-operated firearms, direct impingement does away with a separate gas cylinder, piston, and operating rod assembly. High-pressure gas acts directly upon the bolt and carrier thereby saving weight, lowering costs, and reducing the mass of the operating parts, and thereby the wear on mechanical parts due to movement.

direct impingement

The main disadvantage of direct impingement is that the breech of the firearm's firing mechanism becomes fouled more quickly due to being exposed to the propellants of the cartridge. This is caused by solids from the high-temperature gas condensing on the bolt face and primary operating mechanism. The combustion gases contain vaporized metals, carbon, and impurities in a gaseous state until they contact cooler operating parts. The deposits increase friction on the bolt's camming system leading to malfunctions, so that thorough and frequent cleaning is required to ensure reliability. The amount of fouling depends upon the rifle's design as well as the type of propellant powder used. For example, the French MAS 44 and MAS 49 series of rifles was known to have been successfully operated for years with corrosive-primed ammunition using ordinary field cleaning expedients such as gasoline (as solvent) and straight-grade motor oil (as lubricant)..

A further disadvantage of direct impingement is that combustion gases heat the bolt and bolt carrier as the firearm operates. This heating causes essential lubricant to be "burned off". Lack of proper lubrication is the most common source of weapon malfunctions. These combined factors reduce service life of these parts, reliability, and mean time between failures.[1]

The operation of the system is highly dependent on the length of both barrel and gas tube which transports gas from the barrel to the bolt. Using too short a gas tube can result in increased pressure inside the bolt assembly and increased rate of automatic fire, both of which can have detrimental effect on the weapon and accuracy of shots. Use of silencer also increases the barrel length, further aggravating the situation. The problem can be reduced by using a longer gas tube (also placing the gas port on the barrel forward) and/or by installing a variable gas block which can be adjusted to provide the right amount of gas for a proper operation of the weapon.

History

The first experimental rifle using a direct impingement system was the French ENT 1901 Rossignol B1 rifle followed by Rossignol's B2, B4 and B5. The first successful production weapon was the MAS 40 rifle adopted in March 1940. The Swedish Ag m/42 is another well-known example. Both the French and Swedish rifles use a simple system whereby the gas tube acts as a piston with a cylinder recess in the bolt carrier.

The AR action designed by Eugene Stoner is commonly called a direct impingement system, but it does not utilize a conventional direct impingement system. In U.S. Patent 2,951,424, Stoner states that the system is not a conventional impinging gas system: ″This invention is a true expanding gas system instead of the conventional impinging gas system.″[2] Gas is routed from a port in the barrel directly to a chamber formed in the bolt carrier.

See also

References

  1. ↑ Major Thomas P. Ehrhart Increasing Small Arms Lethality in Afghanistan: Taking Back the Infantry Half-Kilometer. US Army. 2009
  2. ↑ "Patent US2951424 - GAS OPERATED BOLT AND CARRIER SYSTEM". Google.com. Retrieved 2013-04-11.

Sources

This article is issued from Wikipedia - version of the Tuesday, April 26, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.