Direction of movement (ballroom dancing)

In ballroom dancing (and in some other types of partner dance), directions of (progressive) movement, in particular, directions of steps, can be indicated either in relation to the room or in relation to the body position. Directions of turns, although there are only two of them, may also be indicated in several ways.

Directions of progressive movement

Basic directions of movement with respect to the room

These directions may be taken either facing or backing. For example, "backing DC against LOD".

Basic directions of step with respect to body position

These are described in one of the following ways.

A more detailed diagram of step directions of this kind can be found at ballroomdancers.com

Directions of turns

The direction of a turn is indicated in one of the following ways.

While the first two ways are fairly straightforward, the third one requires some explanation, and the fourth one is often a source of confusion.

Natural vs. reverse turns

The term "Natural turn" describes a right turn. This usage originated from the names of Waltz and transferred to other dances of similar category.

A "natural" theory of the origin of the term is that considering the right-shifted position in a couple (even more pronounced in older times) and the counterclockwise direction of travel along the line of dance, the right turns are easier to perform, they are more "natural". This is especially true at the corners of the LOD: the amount of the right turn is effectively 3/4 of a full turn, and the amount of the left turn is effectively 5/4, because the LOD changes its direction by 90 degrees to the left (CCW).

Inside vs. outside turns

The terms "inside turn" and "outside turn" apply to an individual turn of a partner. An "inside turn" is a turn that begins with the arm of the turning partner moving toward the "inside" of the couple (along the imaginary line between the centers of the partners); an "outside turn" is the opposite. The turns may be performed in numerous ways and using different handholds. In dances such as swing and salsa, inside and outside turns typically refer to underarm turns performed by the follower. In these dances the follower's right arm is normally used to lead a turn (most commonly by the leader's left arm, but sometimes by the leader's right arm when a cross-hand or "handshake" position is used), an inside turn is normally a left (counter-clockwise) turn, while an outside turn is a right (clockwise) turn. However, if the follower's left arm is used to initiate the turn, the intended direction of turning may be opposite.

"Inside turn" is most intuitively clear if initially the couple is in an open single-handhold position facing each other, and the name corresponds to the direction of the lead. To lead the inside turn, the leader moves the follower's arm inside, and conversely for the outside turn. In other positions the term is not so clear, therefore in some dances, some prefer to use this term according to its usage in ballet, based on footwork rather than arm style. In ballet, when describing pirouettes, an outward (en dehors) turn is the turn in the direction towards the working leg. Accordingly, an inward (en dedans) turn is the turn in the direction towards the support leg. See also rond de jambe.

The latter definition is unambiguous, but in other contexts it is only applicable to a single footstep. For example, according to this definition, chaînés turns are alternating inside and outside turns, although the direction of the rotation is the same. Therefore, it is common to name the turning figure according to the direction of the first turning step.

See also

Glossary of ballroom dance terms - Dance basic topics

This article is issued from Wikipedia - version of the Friday, October 09, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.