Discrete choice

In economics, discrete choice models, or qualitative choice models, describe, explain, and predict choices between two or more discrete alternatives, such as entering or not entering the labor market, or choosing between modes of transport. Such choices contrast with standard consumption models in which the quantity of each good consumed is assumed to be a continuous variable. In the continuous case, calculus methods (e.g. first-order conditions) can be used to determine the optimum amount chosen, and demand can be modeled empirically using regression analysis. On the other hand, discrete choice analysis examines situations in which the potential outcomes are discrete, such that the optimum is not characterized by standard first-order conditions. Thus, instead of examining “how much” as in problems with continuous choice variables, discrete choice analysis examines “which one.” However, discrete choice analysis can also be used to examine the chosen quantity when only a few distinct quantities must be chosen from, such as the number of vehicles a household chooses to own [1] and the number of minutes of telecommunications service a customer decides to purchase.[2] Techniques such as logistic regression and probit regression can be used for empirical analysis of discrete choice.

Discrete choice models theoretically or empirically model choices made by people among a finite set of alternatives. The models have been used to examine, e.g., the choice of which car to buy,[1][3] where to go to college,[4] which mode of transport (car, bus, rail) to take to work[5] among numerous other applications. Discrete choice models are also used to examine choices by organizations, such as firms or government agencies. In the discussion below, the decision-making unit is assumed to be a person, though the concepts are applicable more generally. Daniel McFadden won the Nobel prize in 2000 for his pioneering work in developing the theoretical basis for discrete choice.

Discrete choice models statistically relate the choice made by each person to the attributes of the person and the attributes of the alternatives available to the person. For example, the choice of which car a person buys is statistically related to the person’s income and age as well as to price, fuel efficiency, size, and other attributes of each available car. The models estimate the probability that a person chooses a particular alternative. The models are often used to forecast how people’s choices will change under changes in demographics and/or attributes of the alternatives.

Discrete choice models specify the probability that an individual chooses an option among a set of alternatives. The probabilistic description of discrete choice behavior is used not to reflect individual behavior that is viewed as intrinsically probabilistic. Rather, it is the lack of information that leads us to describe choice in a probabilistic fashion. In practice, we cannot know all factors affecting individual choice decisions as their determinants are partially observed or imperfectly measured. Therefore, discrete choice models rely on stochastic assumptions and specifications to account for unobserved factors related to a) choice alternatives, b) taste variation over people (interpersonal heterogeneity) and over time (intra-individual choice dynamics), and c) heterogeneous choice sets. The different formulations have been summarized and classified into groups of models.[6]

Applications

Common features of discrete choice models

Discrete choice models take many forms, including: Binary Logit, Binary Probit, Multinomial Logit, Conditional Logit, Multinomial Probit, Nested Logit, Generalized Extreme Value Models, Mixed Logit, and Exploded Logit. All of these models have the features described below in common.

Choice set

The choice set is the set of alternatives that are available to the person. For a discrete choice model, the choice set must meet three requirements:

  1. The set of alternatives must be exhaustive, meaning that the set includes all possible alternatives. This requirement implies that the person necessarily does choose an alternative from the set.
  2. The alternatives must be mutually exclusive, meaning that choosing one alternative means not choosing any other alternatives. This requirement implies that the person chooses only one alternative from the set.
  3. The set must contain a finite number of alternatives. This third requirement distinguishes discrete choice analysis from forms of regression analysis in which the dependent variable can (theoretically) take an infinite number of values.

As an example, the choice set for a person deciding which mode of transport to take to work includes driving alone, carpooling, taking bus, etc. The choice set is complicated by the fact that a person can use multiple modes for a given trip, such as driving a car to a train station and then taking train to work. In this case, the choice set can include each possible combination of modes. Alternatively, the choice can be defined as the choice of “primary” mode, with the set consisting of car, bus, rail, and other (e.g. walking, bicycles, etc.). Note that the alternative “other” is included in order to make the choice set exhaustive.

Different people may have different choice sets, depending on their circumstances. For instance, the Scion automobile was not sold in Canada as of 2009, so new car buyers in Canada faced different choice sets from those of American consumers. Such considerations are taken into account in the formulation of discrete choice models.

Defining choice probabilities

A discrete choice model specifies the probability that a person chooses a particular alternative, with the probability expressed as a function of observed variables that relate to the alternatives and the person. In its general form, the probability that person n chooses alternative i is expressed as:

 P_{ni} \equiv  Prob( \text{Person } n \text{ chooses alternative } i)  = G(x_{ni}, \;x_{nj, j \neq i}, \; s_n, \;\beta),

where

 \scriptstyle x_{ni} is a vector of attributes of alternative i faced by person n,
 \scriptstyle x_{nj, j \neq i} is a vector of attributes of the other alternatives (other than i) faced by person n,
 s_n is a vector of characteristics of person n, and
 \beta is a set of parameters giving the effects of variables on probabilities, which are estimated statistically.

In the mode of transport example above, the attributes of modes (xni), such as travel time and cost, and the characteristics of consumer (sn), such as annual income, age, and gender, can be used to calculate choice probabilities. The attributes of the alternatives can differ over people; e.g., cost and time for travel to work by car, bus, and rail are different for each person depending on the location of home and work of that person.

Properties:

Different models (i.e., models using a different function G) have different properties. Prominent models are introduced below.

Consumer utility

Discrete choice models can be derived from utility theory. This derivation is useful for three reasons:

  1. It gives a precise meaning to the probabilities Pni
  2. It motivates and distinguishes alternative model specifications, e.g., the choice of a functional form for G.
  3. It provides the theoretical basis for calculation of changes in consumer surplus (compensating variation) from changes in the attributes of the alternatives.

Uni is the utility (or net benefit or well-being) that person n obtains from choosing alternative i. The behavior of the person is utility-maximizing: person n chooses the alternative that provides the highest utility. The choice of the person is designated by dummy variables, yni, for each alternative:

 y_{ni} = \begin{cases}
1, & \text{if} \quad U_{ni} > U_{nj} , \quad  j \ne i,\\
0, & \text{otherwise}\end{cases}

Consider now the researcher who is examining the choice. The person’s choice depends on many factors, some of which the researcher observes and some of which the researcher does not. The utility that the person obtains from choosing an alternative is decomposed into a part that depends on variables that the researcher observes and a part that depends on variables that the researcher does not observe. In a linear form, this decomposition is expressed as

 U_{ni}= \beta z_{ni} + \varepsilon_{ni}

where

 \textstyle z_{ni} is a vector of observed variables relating to alternative i for person n that depends on attributes of the alternative, xni, interacted perhaps with attributes of the person, sn, such that it can be expressed as
 \textstyle z_{ni}=z(x_{ni}, \, s_n) for some numerical function z,
 \textstyle \beta is a corresponding vector of coefficients of the observed variables, and
 \varepsilon_{ni} captures the impact of all unobserved factors that affect the person’s choice.

The choice probability is then


\begin{align}
P_{ni}& = Prob(\, y_{ni} = 1 \,) = Prob(\, U_{ni} > U_{nj}, \quad j \not= i \,)  \\
      & = Prob(\, \beta z_{ni} + \varepsilon_{ni} >  \beta z_{nj} + \varepsilon_{nj}, \; j \neq i \,) \\
      & = Prob(\, \varepsilon_{nj}- \varepsilon_{ni} < \beta z_{ni}- \beta z_{nj}, \;  j \neq i \,)
\end{align}

Given β, the choice probability is the probability that the random terms, εnjεni (which are random from the researcher’s perspective, since the researcher does not observe them) are below the respective quantities  \textstyle \forall j \neq i: \beta z_{ni} - \beta z_{nj}, \;  . Different choice models (i.e. different specifications of G) arise from different distributions of εni for all i and different treatments of β.

Properties of discrete choice models implied by utility theory

Only differences matter

The probability that a person chooses a particular alternative is determined by comparing the utility of choosing that alternative to the utility of choosing other alternatives:


\begin{align}
P_{ni}& = Prob(\, y_{ni} = 1 \,) \\
      & = Prob(\, U_{ni} > U_{nj}, \quad\forall j \not= i \,)  \\
      & = Prob(\, U_{ni} \, - \, U_{nj} > 0, \quad\forall j \not= i \,)
\end{align}

As the last term indicates, the choice probability depends only on the difference in utilities between alternatives, not on the absolute level of utilities. Equivalently, adding a constant to the utilities of all the alternatives does not change the choice probabilities.

Scale must be normalized

Since utility has no units, it is necessary to normalize the scale of utilities. The scale of utility is often defined by the variance of the error term in discrete choice models. This variance may differ depending on the characteristics of the dataset, such as when or where the data are collected. Normalization of the variance therefore affects the interpretation of parameters estimated across diverse datasets.

Prominent types of discrete choice models

Discrete choice models can first be classified according to the number of available alternatives.

* Binomial choice models (dichotomous): 2 available alternatives
* Multinomial choice models (polytomous): 3 or more available alternatives

Multinomial choice models can further be classified according to the model specification:

* Models, such as standard logit, that assume no correlation in unobserved factors over alternatives
* Models that allow correlation in unobserved factors among alternatives

In addition, specific forms of the models are available for examining rankings of alternatives (i.e., first choice, second choice, third choice, etc.) and for ratings data.

Details for each model are provided in the following sections.

Binary choice

A. Logit with attributes of the person but no attributes of the alternatives

Main article: Logistic regression

Un is the utility (or net benefit) that person n obtains from taking an action (as opposed to not taking the action). The utility the person obtains from taking the action depends on the characteristics of the person, some of which are observed by the researcher and some are not:

 U_n = \beta s_n + \varepsilon_n

The person takes the action, yn = 1, if Un > 0. The unobserved term, εn, is assumed to have a logistic distribution.

The specification is written succinctly as:

Then the probability of taking the action is

 Prob(y_n=1) = {1 \over 1+exp(-\beta s_n)}

B. Probit with attributes of the person but no attributes of the alternatives

Main article: Probit model

The description of the model is the same as model A, except the unobserved terms are distributed standard normal instead of logistic.

Then the probability of taking the action is

 Prob(y_n=1) = \textstyle \Phi(\beta s_n)  ,
where Φ() is cumulative distribution function of standard normal.

C. Logit with variables that vary over alternatives

Uni is the utility person n obtains from choosing alternative i. The utility of each alternative depends on the attributes of the alternatives interacted perhaps with the attributes of the person. The unobserved terms are assumed to have an extreme value distribution.[nb 1]

which gives this expression for the probability


P_{n1}={exp(\beta z_{n1}) \over (exp(\beta z_{n1})+exp(\beta z_{n2}))}

We can relate this specification to model A above, which is also binary logit. In particular, Pn1 can also be expressed as


P_{n1} = {1 \over (1+exp(-\beta (z_{n1}-z_{n2}))}

Note that if two error terms are iid extreme value,[nb 1] their difference is distributed logistic, which is the basis for the equivalence of the two specifications.

D. Probit with variables that vary over alternatives

The description of the model is the same as model C, except the difference of the two unobserved terms are distributed standard normal instead of logistic.

Then the probability of taking the action is


P_{n1} = \textstyle\Phi(\beta (z_{n1}-z_{n2})),
where Φ is the cumulative distribution function of standard normal.

Multinomial choice without correlation among alternatives

E. Logit with attributes of the person but no attributes of the alternatives

Main article: Multinomial logit

The utility for all alternatives depends on the same variables, sn, but the coefficients are different for different alternatives:

The choice probability takes the form


P_{ni}= {exp(\beta_i s_n) \over \sum_{j=1}^J exp(\beta_j s_n)},
where J is the total number of alternatives.

F. Logit with variables that vary over alternatives (also called conditional logit)

The utility for each alternative depends on attributes of that alternative, interacted perhaps with attributes of the person:

The choice probability takes the form


P_{ni} = {exp(\beta z_{ni}) \over \sum_{j=1}^J exp(\beta z_{nj})},
where J is the total number of alternatives.

Note that model E can be expressed in the same form as model F by appropriate respecification of variables.

 \scriptstyle d_j^k =  \begin{cases}
\scriptstyle 1, & \scriptstyle if \, j=k, \\
\scriptstyle 0, & \scriptstyle otherwise
\end{cases}

Multinomial choice with correlation among alternatives

A standard logit model is not always suitable, since it assumes that there is no correlation in unobserved factors over alternatives. This lack of correlation translates into a particular pattern of substitution among alternatives that might not always be realistic in a given situation. This pattern of substitution is often called the Independence of Irrelevant Alternatives (IIA) property of standard logit models. See the Red Bus/Blue Bus example in which this pattern does not hold,[12] or the path choice example.[13] A number of models have been proposed to allow correlation over alternatives and more general substitution patterns:

The following sections describe Nested Logit, GEV, Probit, and Mixed Logit models in detail.

G. Nested Logit and Generalized Extreme Value (GEV) models

The model is the same as model F except that the unobserved component of utility is correlated over alternatives rather than being independent over alternatives.

H. Multinomial probit

Main article: Multinomial probit

The model is the same as model G except that the unobserved terms are distributed jointly normal, which allows any pattern of correlation and heteroscedasticity:

The choice probability is


\begin{align}
P_{ni} & = Prob(\beta z_{ni}+\varepsilon_{ni} > \beta z_{nj} + \varepsilon_{nj}, \; \forall j \; \ne \; i) \\
       & = \int I(\beta z_{ni}+\varepsilon_{ni} > \beta z_{nj} + \varepsilon_{nj}, \; \forall j \; \ne \; i) \; \phi(\varepsilon_n | \Omega) \;d \varepsilon_n,
\end{align}
where  \scriptstyle \phi(\varepsilon_n | \Omega) is the joint normal density with mean zero and covariance  \scriptstyle \Omega .

I. Mixed logit

Main article: Mixed logit

Mixed Logit models have become increasingly popular in recent years for several reasons. First, the model allows β to be random in addition to ε. The randomness in β accommodates random taste variation over people and correlation across alternatives that generates flexible substitution patterns. Second, the advent in simulation has made approximation of the model fairly easy. In addition, McFadden and Train have shown that any true choice model can be approximated, to any degree of accuracy by a mixed logit with appropriate specification of explanatory variables and distribution of coefficients.[20]

The choice probability is


P_{ni}= \int_\beta L_{ni} (\beta)  \, f(\beta | \theta) \, d\beta,
where
 L_{ni} (\beta) = {exp(\beta z_{ni}) \over {\sum_{j=1}^J exp(\beta z_{nj})}} is logit probability evaluated at  \scriptstyle \beta,
 J is the total number of alternatives.

The integral for this choice probability does not have a closed form, so the probability is approximated by simulation.[23]

Model applications

The models described above are adapted to accommodate rankings and ratings data.

Ranking of alternatives

In many situations, a person's ranking of alternatives is observed, rather than just their chosen alternative. For example, a person who has bought a new car might be asked what he/she would have bought if that car was not offered, which provides information on the person's second choice in addition to their first choice. Or, in a survey, a respondent might be asked:

Example: Rank the following cell phone calling plans from your most preferred to your least preferred.
* $60 per month for unlimited anytime minutes, two-year contract with $100 early termination fee
* $30 per month for 400 anytime minutes, 3 cents per minute after 400 minutes, one-year contract with $125 early termination fee
* $35 per month for 500 anytime minutes, 3 cents per minute after 500 minutes, no contract or early termination fee
* $50 per month for 1000 anytime minutes, 5 cents per minute after 1000 minutes, two-year contract with $75 early termination fee

The models described above can be adapted to account for rankings beyond the first choice. The most prominent model for rankings data is the exploded logit and its mixed version.

J. Exploded logit

Under the same assumptions as for a standard logit (model F), the probability for a ranking of the alternatives is a product of standard logits. The model is called "exploded logit" because the choice situation that is usually represented as one logit formula for the chosen alternative is expanded ("exploded") to have a separate logit formula for each ranked alternative. The exploded logit model is the product of standard logit models with the choice set decreasing as each alternative is ranked and leaves the set of available choices in the subsequent choice.

Without loss of generality, the alternatives can be relabeled to represent the person's ranking, such that alternative 1 is the first choice, 2 the second choice, etc. The choice probability of ranking J alternatives as 1, 2, …, J is then


Prob(ranking \; 1, 2, \ldots , J) = {exp(\beta z_1) \over \sum_{j=1}^J exp(\beta z_{nj})} {exp(\beta z_2) \over \sum_{j=2}^J exp(\beta z_{nj})} \ldots {exp(\beta z_{J-1}) \over \sum_{j=J-1}^J exp(\beta z_{nj})}

As with standard logit, the exploded logit model assumes no correlation in unobserved factors over alternatives. The exploded logit can be generalized, in the same way as the standard logit is generalized, to accommodate correlations among alternatives and random taste variation. The "mixed exploded logit" model is obtained by probability of the ranking, given above, for Lni in the mixed logit model (model I).

This model is also known in econometrics as the rank ordered logit model and it was introduced in that field by Beggs, Cardell and Hausman in 1981.[24][25] One application is the Combes et al. paper explaining the ranking of candidates to become professor.[25] It is also known as Plackett–Luce model in biomedical literature.[25][26][27]

Ratings data

In surveys, respondents are often asked to give ratings, such as:

Example: Please give your rating of how well the President is doing.
1: Very badly
2: Badly
3: Okay
4: Well
5: Very well

Or,

Example: On a 1-5 scale where 1 means disagree completely and 5 means agree completely, how much do you agree with the following statement. "The Federal government should do more to help people facing foreclosure on their homes."

A multinomial discrete-choice model can examine the responses to these questions (model G, model H, model I). However, these models are derived under the concept that the respondent obtains some utility for each possible answer and gives the answer that provides the greatest utility. It might be more natural to think that the respondent has some latent measure or index associated with the question and answers in response to how high this measure is. Ordered logit and ordered probit models are derived under this concept.

K. Ordered logit
Main article: Ordered logit

Let Un represent the strength of survey respondent n’s feelings or opinion on the survey subject. Assume that there are cutoffs of the level of the opinion in choosing particular response. For instance, in the example of the helping people facing foreclosure, the person chooses

  1. 1, if Un < a
  2. 2, if a < Un < b
  3. 3, if b < Un < c
  4. 4, if c < Un < d
  5. 5, if Un > d,

for some real numbers a, b, c, d.

Defining  U_n = \beta z_n + \varepsilon, \; \varepsilon \sim Logistic, then the probability of each possible response is:


\begin{align}
Prob(choosing \, 1)
& = Prob(U_n <a) \\
&= Prob(\varepsilon < a - \beta z_n) \\
& = {1 \over 1+exp(-(a - \beta z_n))}
\end{align}

\begin{align}
Prob(choosing \, 2)
& = Prob(a < U_n < b) \\
&= Prob(a- \beta z_n < \varepsilon  < b - \beta z_n) \\
& = {1 \over 1+exp(-(b - \beta z_n))} - {1 \over 1+exp(-(a - \beta z_n))}
\end{align}

and so on up to


\begin{align}
Prob(choosing \, 5)
& = Prob(U_n  >  d) \\
&= Prob(\varepsilon  >  d - \beta z_n) \\
& = 1 - {1 \over 1+exp(-(d - \beta z_n))}
\end{align}

The parameters of the model are the coefficients β and the cut-off points a − d, one of which must be normalized for identification. When there are only two possible responses, the ordered logit is the same a binary logit (model A), with one cut-off point normalized to zero.

L. Ordered probit
Main article: Ordered probit

The description of the model is the same as model K, except the unobserved terms are distributed standard normal instead of logistic.

Then the choice probabilities are

  • Prob(choosing 1) = Φ(a − βzn),
  • Prob(choosing 2) = Φ(b − βzn) − Φ(a − βzn),

and so on. where Φ(.) is the cumulative distribution function of standard normal.

Notes

  1. 1 2 3 4 5 6 The density of the extreme value distribution is ƒ(εnj) = exp( − εnj)exp( − exp( − εnj)), and the cumulative distribution function is F(εnj) = exp( − exp( − εnj)). This distribution is also called the Gumbel or type I extreme value distribution, a special type of generalized extreme value distribution.

References

  1. 1 2 3 Train, K. (1986). Qualitative Choice Analysis: Theory, Econometrics, and an Application to Automobile Demand. MIT Press. Chapter 8.
  2. Train, K.; McFadden, D.; Ben-Akiva, M. (1987). "The Demand for Local Telephone Service: A Fully Discrete Model of Residential Call Patterns and Service Choice". Rand Journal of Economics 18 (1): 109–123. JSTOR 2555538.
  3. Train, K.; Winston, C. (2007). "Vehicle Choice Behavior and the Declining Market Share of US Automakers". International Economic Review 48 (4): 1469–1496. doi:10.1111/j.1468-2354.2007.00471.x.
  4. 1 2 Fuller, W. C.; Manski, C.; Wise, D. (1982). "New Evidence on the Economic Determinants of Post-secondary Schooling Choices". Journal of Human Resources 17 (4): 477–498. JSTOR 145612.
  5. 1 2 Train, K. (1978). "A Validation Test of a Disaggregate Mode Choice Model" (PDF). Transportation Research 12: 167–174. doi:10.1016/0041-1647(78)90120-x.
  6. Baltas, George; Doyle, Peter. "Random utility models in marketing research: a survey". Journal of Business Research 51 (2): 115–125. doi:10.1016/S0148-2963(99)00058-2.
  7. Ramming, M. S. (2001). "Network Knowledge and Route Choice". Unpublished Ph.D. Thesis, Massachusetts Institute of Technology. MIT catalogue.
  8. Goett, Andrew; Hudson, Kathleen; Train, Kenneth E. (2002). "Customer Choice Among Retail Energy Suppliers". Energy Journal 21 (4): 1–28.
  9. 1 2 Revelt, David; Train, Kenneth E. (1998). "Mixed Logit with Repeated Choices: Households' Choices of Appliance Efficiency Level". Review of Economics and Statistics 80 (4): 647–657. doi:10.1162/003465398557735. JSTOR 2646846.
  10. 1 2 Train, Kenneth E. (1998). "Recreation Demand Models with Taste Variation". Land Economics 74 (2): 230–239. doi:10.2307/3147053.
  11. Lovreglio, R.; Borri, D.; dell'Olio, L.; Ibeas, A. (2014). "A Discrete Choice Model Based on Random Utilities for Exit Choice in Emergency Evacuations". Safety Science 62: 418–426. doi:10.1016/j.ssci.2013.10.004.
  12. Ben-Akiva, M.; Lerman, S. (1985). Discrete Choice Analysis: Theory and Application to Travel Demand. Transportation Studies. Massachusetts: MIT Press.
  13. 1 2 Ben-Akiva, M.; Bierlaire, M. (1999). "Discrete Choice Methods and Their Applications to Short Term Travel Decisions" (PDF). In Hall, R. W. Handbook of Transportation Science.
  14. Vovsha, P. (1997). "Application of Cross-Nested Logit Model to Mode Choice in Tel Aviv, Israel, Metropolitan Area". Transportation Research Record 1607.
  15. Cascetta, E.; Nuzzolo, A.; Russo, F.; Vitetta, A. (1996). "A Modified Logit Route Choice Model Overcoming Path Overlapping Problems: Specification and Some Calibration Results for Interurban Networks" (PDF). In Lesort, J. B. Transportation and Traffic Theory. Proceedings from the Thirteenth International Symposium on Transportation and Traffic Theory. Lyon, France: Pergamon. pp. 697–711.
  16. Chu, C. (1989). "A Paired Combinatorial Logit Model for Travel Demand Analysis". Proceedings of the 5th World Conference on Transportation Research 4. Ventura, CA. pp. 295–309.
  17. McFadden, D. (1978). "Modeling the Choice of Residential Location" (PDF). In Karlqvist, A.; et al. Spatial Interaction Theory and Residential Location. Amsterdam: North Holland. pp. 75–96.
  18. Hausman, J.; Wise, D. (1978). "A Conditional Probit Model for Qualitative Choice: Discrete Decisions Recognizing Interdependence and Heterogenous Preferences". Econometrica 48 (2): 403–426. JSTOR 1913909.
  19. 1 2 Train, K. (2003). Discrete Choice Methods with Simulation. Massachusetts: Cambridge University Press.
  20. 1 2 McFadden, D.; Train, K. (2000). "Mixed MNL Models for Discrete Response" (PDF). Journal of Applied Econometrics 15 (5): 447–470. doi:10.1002/1099-1255(200009/10)15:5<447::AID-JAE570>3.0.CO;2-1.
  21. Ben-Akiva, M.; Bolduc, D. (1996). "Multinomial Probit with a Logit Kernel and a General Parametric Specification of the Covariance Structure" (PDF). Working Paper.
  22. Bekhor, S.; Ben-Akiva, M.; Ramming, M. S. (2002). "Adaptation of Logit Kernel to Route Choice Situation". Transportation Research Record 1805: 78–85. doi:10.3141/1805-10.
  23. . Also see Mixed logit for further details.
  24. Beggs, S.; Cardell, S.; Hausman, J. (1981). "Assessing the Potential Demand for Electric Cars". Journal of Econometrics 17 (1): 1–19. doi:10.1016/0304-4076(81)90056-7.
  25. 1 2 3 Combes, Pierre-Philippe; Linnemer, Laurent; Visser, Michael (2008). "Publish or Peer-Rich? The Role of Skills and Networks in Hiring Economics Professors". Labour Economics 15 (3): 423–441. doi:10.1016/j.labeco.2007.04.003.
  26. Plackett, R. L. (1975). "The Analysis of Permutations". Journal of the Royal Statistical Society, Series C (Applied Statistics) 24 (2): 193–202. JSTOR 2346567.
  27. Luce, R. D. (1959). Individual Choice Behavior: A Theoretical Analysis. Wiley.

Further reading

This article is issued from Wikipedia - version of the Monday, March 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.