Two pass verification

Two-pass verification, also called double data entry, is a data entry quality control method that was originally employed when data records were entered onto sequential 80-column Hollerith cards with a keypunch. In the first pass through a set of records, the data keystrokes were entered onto each card as the data entry operator typed them. On the second pass through the batch, an operator at a separate machine, called a verifier, entered the same data. The verifier compared the second operator's keystrokes with the contents of the original card. If there were no differences, a verification notch was punched on the right edge of the card.[1]

The later IBM 129 keypunch also could operate as a verifier. In that mode, it read a completed card (record) and loaded the 80 keystrokes into a buffer. A data entry operator reentered the record and the keypunch compared the new keystrokes with those loaded into the buffer. If a discrepancy occurred the operator was given a chance to reenter that keystroke and ultimately overwrite the entry in the buffer. If all keystrokes matched the original card, it was passed through and received a verification punch. If corrections were required, then the operator was prompted to discard the original card and insert a fresh card on which corrected keystrokes were typed. The corrected record (card) was passed through and received a corrected verification punch.[2]

Modern use

While this method of quality control clearly is not proof against systematic errors or operator misread entries from a source document, it is very useful in catching and correcting random miskeyed strokes which occur even with experienced data entry operators. However, it proved to be a fatally tragic flaw in the Therac 25 incident. This method has survived the keypunch and is available in some currently available data entry programs (e.g. PSPP/SPSS Data Entry). At least one study suggests that single-pass data entry with range checks and skip rules approaches the reliability of two-pass data entry;[3] however, it is desirable to implement both systems in a data entry application.

References

  1. ↑ "Everything about punch cards". December 28, 2012. Retrieved June 20, 2013.
  2. ↑
  3. ↑ Controlled Clinical Trials from sometime in the 1990s - Control Clin Trials. 1998 Feb; 19(1):15-24.?
This article is issued from Wikipedia - version of the Monday, July 15, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.