ED50
Geodesy | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fundamentals | ||||||||||||||||
Concepts | ||||||||||||||||
Technologies | ||||||||||||||||
Standards | ||||||||||||||||
|
||||||||||||||||
History | ||||||||||||||||
ED 50 ("European Datum 1950") is a geodetic datum which was defined after World War II for the international connection of geodetic networks.
Background
Some of the important battles of World War II were fought on the borders of Germany, the Netherlands, Belgium and France, and the mapping of these countries had incompatible latitude and longitude positioning. This led to the setting up of ED50 as a consistent mapping datum for much of Western Europe. It was, and still is, used in much of Western Europe apart from Great Britain, Ireland, Sweden and Switzerland, which have their own datums.
It used the International Ellipsoid of 1924 ("Hayford-Ellipsoid" of 1909) (radius of the Earth's equator 6378.388 km, flattening 1/297, both exact). That spheroid was an early attempt to model the whole Earth and was widely used around the world until the 1980s when GRS80 and WGS84 were established.
Many national coordinate systems of Gauss–Krüger are defined by ED50 and oriented by means of geodetic astronomy. Up to now it has been used in data bases of gravity fields, cadastre, small surveying networks in Europe and America, and by some developing countries with no modern baselines. ED50 was also part of the fundamentals of the NATO coordinates (Gauss–Krüger and UTM) up to the 1980s.
The geodetic datum of ED50 was centred at the Helmertturm on the Telegrafenberg in Potsdam, (then East) Germany; the intent was to encourage cooperation with the socialist states during the cold war, which failed. The adjustments for later versions of the datum (ED77, ED79) used the Munich Frauenkirche as starting point.
Datum shift between ED50 and WGS84
The longitude and latitude lines on the two datums are the same in the Archangel region of north-west Russia. As one moves westwards across Europe, the longitude lines on ED50 gradually become further west than their WGS84 equivalents, and are around 100 metres west in Spain and Portugal. Moving southwards, the latitude lines on ED50 gradually become further south than the WGS84 lines, and are around 100 m south in the Mediterranean Sea.
This means that if the lines are further west, the longitude value of any given point becomes more easterly. Similarly, if the lines are south, the values become northerly. This is due to the fact that the International Ellipsoid is larger than the GRS80/WGS84 elipsoid, so a given north-south distance will cover more latitude on the new ellipsoid, and a given east-west distance will cover more longitude.
The datum shift for the Universal Transverse Mercator grid is different. The eastings vary between 0 m in Eastern Europe and 100 m in the far west of the continent, roughly similar to the longitude shift, but the northings are about 200 m different across Europe, with the ED50 UTM northing lines south of the WGS84 UTM northing lines. It should be noted that UTM northings are measured from the Equator; distance from the equator to latitude 50 degrees is 112 m more on the International than on the WGS84 spheroid.
See also
- The French datum RGF93
- The Great Britain datum OSGB36.
- For Ireland, the Irish Transverse Mercator.
- The Swedish datum RT90.
- The Switzerland datum CH1903.