EFF Prometheus

Prometheus
Role Two seat turbojet powered motor glider
National origin Switzerland
Manufacturer Entwicklungsgemainschaft für Flugzeubau (EFF)
First flight 22 June 1978
Number built 1 + 1 conversion from a FFA Diamant 18


The EFF Prometheus was an unusual two seat motor glider powered by a pair of small turbojet engines, designed and constructed in Switzerland in the 1970s. Two versions with different spans were built, but it did not go into production.

Design and development

In 1970 EFF began work on a turbojet powered version of the FFA Diamant 18 sailplane. This, named the Prometheus 1, first flew on 21 June 1971. It was initially powered by a 0.745 kN (167.5 lbf) Microturbo Eclair II, later replaced by a 1.18 kN (265.3 lbf) Microturbo TRS 25. The engine was mounted on a short pylon to the rear of the cockpit above the wing centre line. Apart from the addition of the engine and associated fuel tanks and accessories, the aircraft was essentially the single seat Diamant 18.[1] The later Prometheus 19 of 1978 was a two seat, side-by-side configuration aircraft with a new fuselage, purpose built to contain the wider cockpit and the twin turbojets, a new, mid-mounted wing with a different section and a span, in its initial form, of 19.4 m (63 ft 7.8 in). The all-moving tail of the Diamant was replaced by a conventional one.[2]

Design work on the Prometheus 19 began in about 1971 and construction was started in 1975, leading to a first flight on 22 June 1978. Its wing had a single aluminium spar and was skinned with plywood infilled with glass fibre/foam sandwich. It was fitted with flaperons for lateral control and lift generation, combined with DFS-type airbrakes operating only from the upper wing surface.[2]

The forward fuselage had a wooden structure skinned with glass fibre. The cockpit, ahead of the wing, seated two side by side . Two 0.88 kN (197.8 lbf) Microturbo TRS 18 engines were mounted behind the cockpit, fed from a pair of dorsal intakes immediately aft of the glazing and exhausting over the rear fuselage a little behind the wing trailing edge. This section of the fuselage and the empennage were constructed from glass-fibre sandwich. The Prometheus had a tall, straight edged fin with the narrow chord tailplane and single elevator on top in T-configuration. It landed on a retractable tricycle undercarriage. The mainwheels were sprung on rubber blocks and were fitted with brakes; the nosewheel had a oleo shock absorber.[2]

The Prometheus 12 was a variant with a 12.63 m (41 ft 5.2 in) span wing to improve the performance envelope and increase structural strength.

Variants

Prometheus 1
The first prototype, consisting of a Diamant 18 airframe powered by a 0.745 kN (167.5 lbf) Microturbo Eclair II, later replaced by a 1.18 kN (265.3 lbf) Microturbo TRS 25.
Prometheus 19
The initial production configuration with a span of 19.4 m (63 ft 7.78 in) powered by 2 x 0.88 kN (197.8 lbf) Microturbo TRS 18 engines mounted behind the cockpit. Flown 22 June 1978.
Prometheus 12
Span decreased to 12.63 m (41 ft 5.2 in), wing area 13.21 m2 (142.19 sq ft) and the empty weight 668 kg (1,473 lb).[3] First flown 17 September 1979.
Promethus PV
As Prometheus 12, with tip tanks. No production intended.[3]

Specifications (Prometheus 19)

Data from Jane's All the World's Aircraft 1981-82[2]

General characteristics

Performance

Avionics
VFR plus optional IFR


References

  1. ↑ "EFF Prometheus 1". Retrieved 26 October 2012.
  2. 1 2 3 4 Taylor, John W. R. (1981). Jane's All the World's Aircraft 1981-1982. London: Jane's Information Group. pp. 588, 600–601. ISBN 0710607059.
  3. 1 2 Taylor, John W. R. (1982). Jane's All the World's Aircraft 1982-1983. London: Jane's Information Group. pp. 618–9. ISBN 0710607482.

External links

This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.