SpeedStep

Intel SpeedStep
Design firm Intel
Introduced Q1 2005[1]
Type Dynamic frequency scaling

SpeedStep is a series of dynamic frequency scaling technologies (codenamed Geyserville[2] and including SpeedStep, SpeedStep II, and SpeedStep III) built into some Intel microprocessors that allow the clock speed of the processor to be dynamically changed (to different P-states) by software. This allows the processor to meet the instantaneous performance needs of the operation being performed, while minimizing power draw and heat generation.

Enhanced Intel SpeedStep is sometimes abbreviated as EIST. Intel's trademark of "SpeedStep" expired in 2012.

Explanation

Running a processor at high clock speeds allows for better performance. However, when the same processor is run at a lower frequency (speed), it generates less heat and consumes less power. In many cases, the core voltage can also be reduced, further reducing power consumption and heat generation. By using SpeedStep, users can select the balance of power conservation and performance that best suits them, or even change the clock speed dynamically as the processor burden changes.

The power consumed by a CPU with a capacitance C, running at frequency f and voltage V is approximately:[3]

P = C V^2 f

For a given processor, C is a fixed value. However, V and f can vary considerably. For example, for a 1.6 GHz Pentium M, the clock frequency can be stepped down in 200 MHz decrements over the range from 1.6 to 0.6 GHz. At the same time, the voltage requirement decreases from 1.484 to 0.956 V. The result is that the power consumption theoretically goes down by a factor of 6.4. In practice, the effect may be smaller because some CPU instructions use less energy per tick of the CPU clock than others. For example, when an operating system is not busy, it tends to issue x86 halt (HLT) instructions, which suspend operation of parts of the CPU for a time period, so it uses less energy per tick of the CPU clock than when executing productive instructions in its normal state. For a given rate of work, a CPU running at a higher clock rate will execute a greater proportion of HLT instructions. The simple equation which relates power, voltage and frequency above also does not take into account the static power consumption of the CPU. This tends not to change with frequency, but does change with temperature and voltage. Hot electrons, and electrons exposed to a stronger electric field are more likely to migrate across a gate as "gate leakage" current, leading to an increase in static power consumption.

Older processors such as the Pentium 4-M, which use older versions of SpeedStep, have fewer clock-speed increments. SpeedStep technology is partly responsible for the reduced power consumption of Intel’s Pentium M processor, part of the Centrino brand.

Compatibility

Pentium 4 (Prescott)

EIST was introduced in several Prescott 6 series in the first quarter of 2005, namely the Pentium 4 660.[1]

Yonah

Most Pentium, Core Duo and Solo processors support EIST.

Merom, Conroe and Allendale, Penryn and Wolfdale

Most Core 2 Duo, Quad, Extreme and Solo processors support EIST. Celeron started supporting EIST in Allendale.

Nehalem, Sandy Bridge, Ivy Bridge, Haswell and Skylake

All Core i3, i5, i7, Xeon, Celeron and Pentium processors support EIST.

Known issues

Microsoft has reported that there may be problems previewing video files when SpeedStep (or the AMD equivalent PowerNow!) is enabled under Windows 2000 or Windows XP.[4]

Operating system support

In contrast, AMD continues to supply and support drivers for its competing PowerNow! technology that will work on Windows 2000, ME, 98, and NT.[10][11]

Versions

See also

References

External links

This article is issued from Wikipedia - version of the Thursday, May 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.