Eddy current separator

An eddy current separator uses a powerful magnetic field to separate non-ferrous metals from waste after all ferrous metals have been removed previously by some arrangement of magnets. The device makes use of eddy currents to effect the separation. Eddy current separators are not designed to sort ferrous metals which become hot inside the eddy current field. This can lead to damage of the eddy current separator unit belt.

The eddy current separator is applied to a conveyor belt carrying a thin layer of mixed waste. At the end of the conveyor belt is an eddy current rotor. Non-ferrous metals are thrown forward from the belt into a product bin, while metals simply fall off the belt due to gravity.

Eddy current separators may use a rotating drum with permanent magnets, or may use an electromagnet depending on the type of separator.[1]

History

The separator with eddy current was invented in 1984 by the French thermodynamician Hubert Juillet.

[2] · [3] · [4]

References

  1. Myer Kutz Environmentally conscious mechanical design, John Wiley and Sons, 2007 ISBN 0-471-72636-2 page 261
  2. Séparateur à répulsion magnétique, sur le site espacenet.com, consulté le 21 janvier 2015
  3. Système de séparation des métaux non ferreux., sur le site espacenet.com, consulté le 21 janvier 2015
  4. Séparateur pour un mélange de particules ayant des caractéristiques différentes, sur le site espacenet.com, consulté le 27 janvier 2015
This article is issued from Wikipedia - version of the Monday, January 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.