Enders Dam

Enders Dam

Concrete structure in grass-covered earthen dam; six floodgates

Outlet structure at Enders Dam
Location in Nebraska
Country United States
Location Chase County, Nebraska
Coordinates 40°25′21″N 101°31′05″W / 40.42250°N 101.51806°W / 40.42250; -101.51806Coordinates: 40°25′21″N 101°31′05″W / 40.42250°N 101.51806°W / 40.42250; -101.51806
Purpose Water storage, flood control
Construction began 1947
Opening date 1951
Owner(s) United States Bureau of Reclamation
Dam and spillways
Type of dam Earth fill dam
Impounds Frenchman Creek
Reservoir
Creates Enders Reservoir

Enders Dam (National ID # NE01070) is a dam in Chase County, Nebraska, near the southwestern corner of the state.

The earthen dam was constructed between 1947 and 1951 by the United States Bureau of Reclamation. It is 134 feet (41 m) high and 2,603 feet (793 m) long at its crest.[1] It impounds Frenchman Creek for irrigation storage and flood control, part of the Bureau's Frenchman-Cambridge Division of the extensive Pick-Sloan Missouri Basin Program. The dam is owned and operated by the Bureau.[2]

The reservoir it creates, Enders Reservoir, has a water surface area of 2.5 square miles (6.5 km2) at its maximum capacity of 34,500 acre feet (42,600,000 m3).[3] The adjoining Enders Reservoir State Recreation Area is a popular location for fishing, hunting and other outdoor recreation activities.[4]

Flows in the Frenchman, and associated releases from Enders Reservoir, have declined over the years. The primary cause is believed to be the lowering of water table levels due to groundwater irrigation in the Frenchman Basin. This has reduced the flows of springs that have historically fed the creek.[5] In order to maintain the recreational and wildlife environments on the reservoir, irrigation releases were halted after 2002.[6]

References

This article is issued from Wikipedia - version of the Wednesday, September 16, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.