Enteric coating

An enteric coating (also known as gastro-resistant drugs) is a polymer barrier applied on oral medication that prevents its dissolution or disintegration in the gastric environment.[1] This helps by either protecting drugs from the acidity of the stomach, the stomach from the detrimental effects of the drug, or to release the drug after the stomach (usually in the upper tract of the intestine).[2] Some drugs are, in fact, unstable at the acid gastric pH, and need to be protected from degradation. Enteric coating is also an effective method to obtain drug targeting. Other drugs such as some anthelmintics may, in fact, require to reach a high concentration in a specific district of the intestine.[1] Enteric coating may also be used during studies as an useful research tool to determine drug absorption.[3] Enteric coated medications pertain to the "delayed action" dosage form category. It should be noted that from a pharmacological point of view the term "enteric coating" is not entirely correct, as gastric resistance can be also obtained by adding enteric polymeric systems to the matrix of the dosage form. Tablets, mini-tablets, pellets and granules (usually filled into capsule shells) are the most common enteric-coated dosage forms.[3]

Description

Most enteric coatings work by presenting a surface that is stable at the highly acidic pH found in the stomach, but breaks down rapidly at a less acidic (relatively more basic) pH. For example, they will not dissolve in the gastric acids of the stomach (pH ~3), but they will in the alkaline (pH 7-9) environment present in the small intestine.[4][5] The time required for an enteric-coated dosage form to reach the intestine mostly depends on the presence and type of food in the stomach. It varies highly from 30 minutes up to 7 hours, with an average time of 6 hours.[6] Although some studies indicated that larger sized dosage forms may require additional time for gastric emptying, others suggested that the size, shape, or volume of the tablet possess no significant effects instead.[7][8][9] Enteric coated granules emptying rate is, however, less affected by the presence of food and present the more uniform release and reproducible transit time typical of the multiparticulates dispersion.[3][8]

By preventing the drug from dissolving into the stomach, enteric coating may protect gastric mucosa from the irritating effects of the medication itself. When the drug reaches the neutral or alkaline environment of the intestine, its active ingredients can then dissolve and become available for absorption into the bloodstream. Drugs that have an irritant effect on the stomach, such as aspirin or potassium chloride, can be coated with a substance that will dissolve only in the small intestine. However, it has been shown that enteric coated aspirin may lead to incomplete inhibition of platelets.[10] Likewise, certain groups of proton pump inhibitors (esomeprazole, omeprazole, pantoprazole and all grouped azoles) are acid-activated. For such types of drugs, enteric coating added to the formulation tends to avoid activation in the mouth and esophagus.

Materials used for enteric coatings include fatty acids, waxes, shellac, plastics, and plant fibers. Conventional materials used are solutions of film resins. However as the solvents for such solutions are organic solvents, there's a concern about the toxicity potential of the traces of the residual solvents in the tablet coating.[11]

The first form of gastro-resistant coating was introduced by Unna in 1884 in the form of keratin-coated pills, although it was later discovered that they weren't able to withstand gastric digestion.[12] Salol was also used by Ceppi as one of the first forms of enteric coating.[13] However, the first material that was extensively used as enteric coating agent was shellac, since its introduction in 1930. Properly treated or hydrolyzed shellac showed different enteric release properties.[3]

Recently, some companies have begun to apply enteric coatings to fish oil (omega-3 fatty acids) supplements. The coating prevents the fish oil capsules from being digested in the stomach, which has been known to cause a fishy reflux.

Sometimes the abbreviation "EC" is added beside the name of the drug to indicate that it has an enteric coating.

Composition of coatings

See also

References

  1. 1 2 Tarcha, Peter J. (1990-11-21). Polymers for Controlled Drug Delivery. CRC Press. ISBN 9780849356520.
  2. ↑ Bundgaard, Hans; Hansen, Anne Bagger; Kofod, Helmer (1982-02-01). Optimization of drug delivery: proceedings of the Alfred Benzon Symposium 17 held at the premises of the Royal Danish Academy of Sciences and Letters, Copenhagen 31 May-4 June 1981. Munksgaard. ISBN 9788716089793.
  3. 1 2 3 4 Wen, Hong; Park, Kinam (2011-01-14). Oral Controlled Release Formulation Design and Drug Delivery: Theory to Practice. John Wiley & Sons. ISBN 9781118060322.
  4. ↑ Juliano, R. L. (1980-10-01). Drug delivery systems: characteristics and biomedical applications. Oxford University Press. ISBN 9780195027006.
  5. ↑ Aulton, Michael; Cole, Graham; Hogan, John (1995-10-27). Pharmaceutical Coating Technology. Taylor & Francis. ISBN 9780136628910.
  6. ↑ Bukey, F. S.; Brew, Marjorie (1934-12-01). "A study of the emptying time of the stomach with reference to pills and tablets". Journal of the American Pharmaceutical Association 23 (12): 1217–1219. doi:10.1002/jps.3080231216. ISSN 1930-2169.
  7. ↑ Alpsten, M.; Bogentoft, C.; Ekenved, G.; Sölvell, L. (1982-01-01). "Gastric emptying and absorption of acetylsalicylic acid administered as enteric-coated micro-granules". European Journal of Clinical Pharmacology 22 (1): 57–61. doi:10.1007/BF00606426. ISSN 0031-6970.
  8. 1 2 Kaniwa, N.; Aoyagi, N.; Ogata, H.; Ejima, A.; Motoyama, H.; Yasumi, H. (1988-08-01). "Gastric emptying rates of drug preparations. II. Effects of size and density of enteric-coated drug preparations and food on gastric emptying rates in humans". Journal of Pharmacobio-Dynamics 11 (8): 571–575. ISSN 0386-846X. PMID 3236215.
  9. ↑ Park, H. M.; Chernish, S. M.; Rosenek, B. D.; Brunelle, R. L.; Hargrove, B.; Wellman, H. N. (1984-03-01). "Gastric emptying of enteric-coated tablets". Digestive Diseases and Sciences 29 (3): 207–212. ISSN 0163-2116. PMID 6321117.
  10. ↑ Maree, Andrew O.; Curtin, Ronan J.; Dooley, Michelle; Conroy, Ronan M.; Crean, Peter; Cox, Dermot; Fitzgerald, Desmond J. (2005-10-04). "Platelet response to low-dose enteric-coated aspirin in patients with stable cardiovascular disease". Journal of the American College of Cardiology 46 (7): 1258–1263. doi:10.1016/j.jacc.2005.06.058. ISSN 1558-3597. PMID 16198840.
  11. ↑ Patell, Mahesh K. (Oct 4, 1988), Enteric coated tablet and process for making, retrieved 2016-02-18
  12. ↑ Unna, Keratinirte Pillen, Pharm. Zentrahlle, 25, 577, 1884.
  13. ↑ Thompson HO, Lee CO. History, literature, and theory of enteric coatings. J. Am. Pharm. Assoc. 1945;34:135–138
This article is issued from Wikipedia - version of the Thursday, April 28, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.