Erasure code

In information theory, an erasure code is a forward error correction (FEC) code for the binary erasure channel, which transforms a message of k symbols into a longer message (code word) with n symbols such that the original message can be recovered from a subset of the n symbols. The fraction r = k/n is called the code rate, the fraction k’/k, where k’ denotes the number of symbols required for recovery, is called reception efficiency.

Optimal erasure codes

Optimal erasure codes have the property that any k out of the n code word symbols are sufficient to recover the original message (i.e., they have optimal reception efficiency). Optimal erasure codes are maximum distance separable codes (MDS codes).

Optimal codes are often costly (in terms of memory usage, CPU time, or both) when n is large. Except for very simple schemes, practical solutions usually have quadratic encoding and decoding complexity. In 2014, Lin et al. [1] gave an approach with O(n \log n) operations.

Parity check

Parity check is the special case where n = k + 1. From a set of k values \{v_i\}_{1\leq i \leq k}, a checksum is computed and appended to the k source values:

v_{k+1}= - \sum_{i=1}^k v_i.

The set of k + 1 values \{v_i\}_{1\leq i \leq k+1} is now consistent with regard to the checksum. If one of these values, v_e, is erased, it can be easily recovered by summing the remaining variables:

v_{e}= - \sum_{i=1 ,i \neq e }^{k+1}v_i.

Polynomial oversampling

Example: Err-mail (k = 2)

In the simple case where k = 2, redundancy symbols may be created by sampling different points along the line between the two original symbols. This is pictured with a simple example, called err-mail:

Alice wants to send her telephone number (555629) to Bob using err-mail. Err-mail works just like e-mail, except

  1. About half of all the mail gets lost.[2]
  2. Messages longer than 5 characters are illegal.
  3. It is very expensive (similar to air-mail).

Instead of asking Bob to acknowledge the messages she sends, Alice devises the following scheme.

  1. She breaks her telephone number up into two parts a = 555, b = 629, and sends 2 messages – "A = 555" and "B = 629" – to Bob.
  2. She constructs a linear function, f(i) = a + (b-a)(i-1), in this case f(i) = 555 + 74(i-1), such that f(1) = 555 and f(2) = 629.

  1. She computes the values f(3), f(4), and f(5), and then transmits three redundant messages: "C = 703", "D = 777" and "E = 851".

Bob knows that the form of f(k) is f(i) = a + (b-a)(i-1), where a and b are the two parts of the telephone number. Now suppose Bob receives "D = 777" and "E = 851".

Bob can reconstruct Alice's phone number by computing the values of a and b from the values (f(4) and f(5)) he has received. Bob can perform this procedure using any two err-mails, so the erasure code in this example has a rate of 40%.

Note that Alice cannot encode her telephone number in just one err-mail, because it contains six characters, and the maximum length of one err-mail message is five characters. If she sent her phone number in pieces, asking Bob to acknowledge receipt of each piece, at least four messages would have to be sent anyway (two from Alice, and two acknowledgments from Bob). So the erasure code in this example, which requires five messages, is quite economical.

This example is a little bit contrived. For truly generic erasure codes that work over any data set, we would need something other than the f(i) given.

General case

The linear construction above can be generalized to polynomial interpolation. Additionally, points are now computed over a finite field.

First we choose a finite field F with order of at least n, but usually a power of 2. The sender numbers the data symbols from 0 to k  1 and sends them. He then constructs a (Lagrange) polynomial p(x) of order k such that p(i) is equal to data symbol i. He then sends p(k), ..., p(n  1). The receiver can now also use polynomial interpolation to recover the lost packets, provided he receives k symbols successfully. If the order of F is less than 2b, where b is the number of bits in a symbol, then multiple polynomials can be used.

The sender can construct symbols k to n  1 'on the fly', i.e., distribute the workload evenly between transmission of the symbols. If the receiver wants to do his calculations 'on the fly', he can construct a new polynomial q, such that q(i) = p(i) if symbol i < k was received successfully and q(i) = 0 when symbol i < k was not received. Now let r(i) = p(i)  q(i). Firstly we know that r(i) = 0 if symbol i < k has been received successfully. Secondly, if symbol ik has been received successfully, then r(i) = p(i)  q(i) can be calculated. So we have enough data points to construct r and evaluate it to find the lost packets. So both the sender and the receiver require O(n (n  k)) operations and only O(n  k) space for operating 'on the fly'.

Real world implementation

This process is implemented by Reed–Solomon codes, with code words constructed over a finite field using a Vandermonde matrix.

Near-optimal erasure codes

Near-optimal erasure codes require (1 + ε)k symbols to recover the message (where ε>0). Reducing ε can be done at the cost of CPU time. Near-optimal erasure codes trade correction capabilities for computational complexity: practical algorithms can encode and decode with linear time complexity.

Fountain codes (also known as rateless erasure codes) are notable examples of near-optimal erasure codes. They can transform a k symbol message into a practically infinite encoded form, i.e., they can generate an arbitrary amount of redundancy symbols that can all be used for error correction. Receivers can start decoding after they have received slightly more than k encoded symbols.

Regenerating codes address the issue of rebuilding (also called repairing) lost encoded fragments from existing encoded fragments. This issue arises in distributed storage systems where communication to maintain encoded redundancy is a problem.

Examples

Here are some examples of implementations of the various codes:

Near optimal erasure codes

Near optimal fountain (rateless erasure) codes

Optimal erasure codes

Other

See also

References

  1. Sian-Jheng Lin, Wei-Ho Chung, and Yunghsiang S. Han, "Novel polynomial basis and its application to Reed-Solomon erasure codes", The 55th Annual Symposium on Foundations of Computer Science (FOCS 2014). arXiv:1404.3458
  2. Some versions of this story refer to the err-mail daemon.
  3. "Original paper". CiteSeerX: 10.1.1.117.6892.

External links

This article is issued from Wikipedia - version of the Friday, January 15, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.