FD-Composites ArrowCopter

ArrowCopter
ArrowCopter in flight on 7 March 2012
Role Autogyro
National origin Austria
Manufacturer FD-Composites GmbH
Designer Dietmar Fuchs
First flight 2008
Introduction 2010
Status In production
Produced 2009[1] - present
Number built 15


The ArrowCopter is a series of Austrian autogyros, designed and produced by FD-Composites GmbH of Zeillern. The ArrowCopter AC20 series is supplied as complete, factory built ready-to-fly-aircraft.[1][2]

Design and development

The ArrowCopter was designed to comply with British BCAR Section T rules. It features a single main rotor, a two-seats in tandem configuration enclosed cockpit with a bubble canopy, stub wings, tricycle landing gear and a four cylinder, liquid and air-cooled, four-stroke, dual-ignition turbocharged 115 hp (86 kW) Rotax 914 engine in pusher configuration. The 100 hp (75 kW) normally aspirated Rotax 912S and a 118 hp (88 kW) BMW boxer engine with a reduction drive were reported as being under consideration in 2011 as alternate powerplants.[1]

The aircraft fuselage is made from an autoclave-cured carbon fibre/kevlar sandwich and mounts an 8.50 m (27.9 ft) diameter rotor. The main landing gear wheels are mounted on the tips of the short wings. The AC 10 has an empty weight of 250 kg (550 lb) and a gross weight of 450 kg (990 lb), giving a useful load of 200 kg (440 lb).[1]

Operational history

By January 2013 one example of the ArrowCopter AC10 had been registered in the United States with the Federal Aviation Administration.[3]

Variants

FD-Composites ArrowCopter AC10
Initial version with a maximum takeoff mass of 560 kg (1,230 lb)[1]
FD-Composites ArrowCopter AC20
Production version with an empty mass of approximately 350 kg (770 lb) and a MTOM of 560 kg (1,230 lb)[4]

Specifications (AC20)

ArrowCopter AC20 side view

Data from Bayerl[1][4]

General characteristics

Performance

References

  1. 1 2 3 4 5 6 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 180. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  2. FD-Composites (n.d.). "Contact Manufacturer & Distribution". Retrieved 3 January 2013.
  3. Federal Aviation Administration (2 January 2013). "Make / Model Inquiry Results". Retrieved 2 January 2013.
  4. 1 2 "ArrowCopter technical details". www.arrow-copter.com. Retrieved 3 January 2013.

External links

Wikimedia Commons has media related to Arrow-Copter AC10.
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.