FOX-7
 | |
| Names | |
|---|---|
| IUPAC name
2,2-Dinitroethene-1,1-diamine | |
| Other names
FOX-7 FOX7 | |
| Identifiers | |
145250-81-3  | |
| Jmol interactive 3D | Image |
| |
| Properties | |
| C2H4N4O4 | |
| Molar mass | 148.08 |
| Density | 1.885 g cm−3 |
| Melting point | 238 °C (460 °F; 511 K) (decomposes) |
| Explosive data | |
| Detonation velocity | 8870 m/s at density 1.885 g cm−3 (estimated) 8335 m/s at density 1.756 g cm−3 (measured, small-scale testing) |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
verify (what is  ?) | |
| Infobox references | |
FOX-7 or 1,1-diamino-2,2-dinitroethene (DADNE)[1] is an insensitive high explosive compound. It was first synthesized in 1998 by the Swedish National Defence Research Institute (FOA).[2]
FOX-7 is similar to the insensitive chemical compound TATB, which is a benzene ring compound with three amino and three nitro groups.[3] FOX-7 has a two-carbon backbone rather than a benzene ring, but the amino and nitro groups have similar effects in both cases according to published reports on sensitivity and chemical decay processes of FOX-7. FOX-7 is today produced by Eureco Bofors AB in Sweden.[4]
Its explosive properties appear extremely favorable; in addition to its insensitive properties, the detonation velocity of mixtures of 80% FOX-7 plus binders are as high as Composition B, and nearly pure FOX-7 based plastic bonded explosives are slightly superior to RDX. [5] FOX-7 has been calculated to have a detonation velocity of 8,870 m/s.[2]
Due to its small-scale production, the cost of FOX-7 is relatively high. However, the production is based on commercial starting material and the synthesis is uncomplicated.[6] The price is therefore predicted to fall as production scale increases. There is no current full scale use of FOX-7, but it is being tested at several military research centers. The need for less sensitive munitions is the most important driver for testing FOX-7.
References
- ↑ US Patent 6340780 - Method of preparing salts of dinitromethane
- 1 2 Computational Studies of FOX-7, a New Insensitive Explosive, Dorsett, 2000, accessed Aug 25, 2005
- ↑ Hervé, Grégoire; Jacob, Guy; Latypov, Nikolaj (2005). "The reactivity of 1,1-diamino-2,2-dinitroethene (FOX-7)". Tetrahedron 61 (28): 6743. doi:10.1016/j.tet.2005.05.010.
- ↑ Anniyappan, M.; Talawar, M.B.; Gore, G.M.; Venugopalan, S.; Gandhe, B.R. (2006). "Synthesis, characterization and thermolysis of 1,1-diamino-2,2-dinitroethylene (FOX-7) and its salts". Journal of Hazardous Materials 137 (2): 812–9. doi:10.1016/j.jhazmat.2006.03.034. PMID 16701943.
- ↑ DETONATION AND SENSITIVITY PROPERTIES OF FOX-7 AND FORMULATIONS CONTAINING FOX-7, Karlsson et al., 2002, accessed Aug 25, 2005
- ↑ US Patent 6312538 - Chemical compound suitable for use as an explosive, intermediate and method for preparing the compound<
Further reading
- Sorescu, Dan C.; Boatz, Jerry A.; Thompson, Donald L. (2001). "Classical and Quantum-Mechanical Studies of Crystalline FOX-7 (1,1-Diamino-2,2-dinitroethylene)". The Journal of Physical Chemistry A 105 (20): 5010. doi:10.1021/jp010289m.
- Evers, Jürgen; Klapötke, Thomas M.; Mayer, Peter; Oehlinger, Gilbert; Welch, Jan (2006). "Α- and β-FOX-7, Polymorphs of a High Energy Density Material, Studied by X-ray Single Crystal and Powder Investigations in the Temperature Range from 200 to 423 K". Inorganic Chemistry 45 (13): 4996–5007. doi:10.1021/ic052150m. PMID 16780321.