Featherboard

A shop-made featherboard.

A featherboard is a safety device used when working with stationary routers or power saws such as table saws or bandsaws. The purpose of a featherboard is to apply pressure against a workpiece, keeping it flat against a machine table or fence.

Featherboard shapes and sizes vary depending on the tasks for which they are intended. A serviceable featherboard can be shop-fabricated from an approximately 3/4 × 3 × 11 inch piece of straight grained, defect-free wood cut crosswise at a 45-degree angle on one end.[1] Several parallel cuts in the direction of the grain create fingers or "feathers" that flex in the direction of workpiece travel, preventing the workpiece from being dragged backwards by blade friction.

Featherboards are also useful for edge jointing, and making moulding on router tables.[2][3]

References

  1. ↑ Nagyszalanczy, Sandor: Woodshop Jigs & Fixtures, page 215, Taunton Press, 1994.
  2. ↑ Workbench Magazine dec 2005
  3. ↑ American Woodworker 2003 Tool Buyers Guide
This article is issued from Wikipedia - version of the Friday, September 25, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.