Flatland BMX

Flatland BMX rider, 'scuffing' the back wheel while performing a "lard yard", at Santa Monica beach

Flatland is a freestyle BMX riding style performed on smooth flat surfaces that do not include any ramps, jumps, or grindrails. It is sometimes described as a form of artistic cycling with a blend of breakdancing.

Flatland occupies a position somewhat removed from the rest of freestyle BMX. They are often very dedicated, and will spend several hours a day perfecting their techniques.

Flatland also differs from the others in that the terrain used is nothing but a smooth, flat surface. Tricks are performed by spinning and balancing on the bike in a variety of unexpected positions. Riders almost always use either knurled/grip taped aluminum or plastic pegs to stand on to manipulate the bike into even more imaginative positions.

Flatland bikes typically have a shorter wheelbase than other freestyle bikes. This shorter wheelbase requires less effort to make the bike spin or to position the bike on one wheel. One of the primary reasons flatlanders often ride only flatland is the decreased stability of using their shorter bikes on ramps, dirt and street.

A variety of options is commonly found on flatland bikes. The most unifying feature of flatland bikes is the use of four pegs, one on the end of each wheel axle. Flatlanders will choose to run a front brake (or a dual front brake; one front brake with two brake levers using one brake cable), front and rear brakes, or no brakes at all, depending on stylistic preference.

Flatland bikes

Although the flatland bicycle is similar to most other BMX bicycles, flatland is often performed with specially designed frames with geometry (head tube angle, top tube length, etc.) suited to the needs of flatlanders. Front and rear bolt-on pegs, a hollow compression bolt on the forks for the front brake cable, and a rear brake cable detangler or Gyro to allow the bars to rotate endlessly without tangling the brake cables. Also invented specifically for flatland riding is the rear hub mechanism known as a freecoaster, which allows the rear wheel to roll backwards without engaging the hub and making the cranks rotate backwards as they would on a normal freewheel or cassette style hub. Other technical bicycle setup specifics can include zero offset forks, narrow handlebars, very high pressure tires (100psi and higher), and a very small front sprocket (18-28 teeth).

Style

In competition, talent and skill are judged by the ability to maintain coordination, and balance while performing a variety of difficult and elegant moves. There are usually several categories for judging purposes which can include:

Flatland is an involving, time-consuming discipline in which the rider learns different balance/counterbalance points and center-of-gravity in motion techniques through repetition and trial-and-error. Some tricks can be learned in hours, while others may take years to master.

Various riders emphasize different aspects of the discipline: the artistic nature of flatland and the originality of tricks, the number and difficulty of tricks, or the simple enjoyment of the activity. Only contest riders need to be concerned with the competitive side of the discipline, as there are many riders who prefer doing shows, taking parts in videos, or simply riding with their friends and enjoying themselves.

Riders usually pedal a few times for speed, and then perform various stunts often involving difficult and/or awkward stances on pegs, mounted to the axles of their front or back wheels. Pegs are aluminum or plastic tubes, which are bolted onto both sides of the front and back axles. When flatland riding first began, most riders would do one trick and then return to the pedals. However, by combining different body and bicycle positions into "combos" and "linking" them together, riders began to do several tricks in a row without stopping between each move. Flatland riding is now usually a combination of many different kinds of moves, often linked together non-stop as the rider goes through as many as 10-12 consecutive moves, and position/direction changes, before returning to the pedals.

History

Flatland originated from three pioneers; R. L. Osborn, Bob Haro, and Bob Morales. R. L. Osborn was a fan favorite in the mid 80s, being the highest paid BMX flatland professional ever after signing a contract with General Bicycles for around $100,000 US. Bob Haro went on to become founder of Haro Bicycles. Bob Morales was the founder of the once elite American Freestyle Association. The AFA was the dominating league for both professional and amateur flatland and quarter pipe events. While there were several amateur AFA events the Masters series contest, held throughout the US was the biggest pro/am flatland/quarter pipe event of the time.

Flatland's roots can be dated back to the 50's. Flatland has gone through many stylistic changes since its beginnings in the late 70s. Riders once wore full protective gear and full face helmets, starred in feature-length films such as Rad (film), and performed in large scale events such as NBA halftimes. Following the decline in popularity and subsequent recession in most action sports at the end of the 80s, flatland went "underground". It resurfaced in the late 90s with the return of media attention in the form of events such as the X Games. Flatland was dropped from the X Games and other large scale events in the early 2000s, forcing the sport/artform to become more independently run and owned. Most flatland companies and events now exist outside of other BMX circles, although there is still, somewhat limited, coverage in mainstream BMX magazines and videos.
With the removal of flatland from events such as the XGames, many independent event organizers have stepped up and taken flatland to the masses through creative, independently organized events such as the Red Bull Circle Balance, Circle Cow, and BMX Masters events in Europe, the Elevation Flatland series and Voodoo Jams in the USA, and smaller "jams" such as the Athens Jam and Hollywood Jams which take place in the US. These independent events and jams are what has helped keep flatland "alive" and thriving over the years.

Flatland tricks

Flatland tricks are given names, usually by the first person to invent it. For example, the first flatland "bunnyhop tailwhip" was first landed in a Burger King parking lot by Bill Nitschke, and there named a "whopper". Terry Adams invented a trick following Hurricane Katrina (since Terry lives in Louisiana), and named his new trick "The Katrina".

The name may be modified (referencing whether it is rolled, scuffed, g-turned, stationary, etc.) or included in a list of other tricks, with "links" such as "bar-flip into" or "jump to", to indicate a combination, often shortened to "combo."

These names generally apply to popular positions, or combinations of tricks:

Tricks and Spins

*NOTE: These tricks mentioned are a few within the art/sport of flatland. These tricks and others have variants and depend upon the style of the rider performing them. Also, these tricks can be linked or combined into sequences or routines that could not otherwise be titled as a single trick.

See also

This article is issued from Wikipedia - version of the Thursday, February 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.