Flexity 2
One of the 88 Flexity 2 trams ordered by
De Lijn
The Flexity 2 is a family of tram or light-rail vehicle manufactured by Bombardier Transportation. It is 100% low-floor, in order to easily accommodate wheelchairs and pushchairs. The trams are bi-directional, with cabs at both ends and doors on both sides, and are articulated with five sections. This family of trams debuted on the Blackpool Tramway, England.[1]
Introduction
The Flexity 2 is a development of Bombardier's successful Flexity family of LRVs and is designed to be highly customisable. It incorporates a number of significant advances over its predecessor including improved corrosion resistance, enhanced safety through a redesigned cab with improved impact protection, improved energy efficiency through the inclusion of cells to store energy temporarily after braking which achieves double the energy saving of feeding it back through the wires, reduced mass, optional support for its PRIMOVE under track power transmission system and the new Flexx Urban 3000 bogie which allows the LRV to run on conventional wheelsets. The vehicle also features improved air-conditioning and a wider more spacious interior via the reduction in the width of its sidewalls allowing more seating or other uses. These changes have resulted in a very slight increase in axle load, although Bombardier says this does not limit the operational capabilities of the vehicle.
The launch customer was Blackpool Transport which ordered 16 units in July 2009[2] to replace its tourist-focused and high-maintenance heritage fleet with a new vehicle suitable for daily commuters. The worldwide launch of the tram, including showing the first new tram occurred on 8 September 2011, at the new Starr Gate depot in Blackpool.[3]
Additional orders came from G:link ordering 14 units for operation in Gold Coast, Australia, Basler Verkehrs-Betriebe ordering 60 units for Basel, Switzerland, De Lijn ordering in total 88 units for Antwerp and Ghent, Belgium and Suzhou New District Tram Co., Ltd. ordering 18 units for Suzhou New District, Suzhou, China built by CSR Puzhen under a Bombardier technology license agreement.
Technical specifications
Low-floor versions
City |
Operator |
Type designation |
Built in |
Number of vehicles |
Articulated Sections |
Track Gauge |
Length |
Width |
Height |
Weight (empty) |
Maximum power |
Electrification |
|
Blackpool, United Kingdom |
Blackpool Transport |
Flexity 2 (Blackpool) |
2010-2012 |
16 |
5 |
1435 mm |
32.23 m (105 ft 9 in) |
2.65 m (8 ft 8 in) |
3.42 m (11 ft 3 in) |
40.9 t (40.3 long tons; 45.1 short tons) |
4 x 120 kW (160 hp) |
600 V DC Overhead |
[2] |
Gold Coast, Australia |
G:link |
|
2013-2014 |
14 |
7 |
1435 mm |
43.5 m (142 ft 9 in) |
2.65 m (8 ft 8 in) |
3.42 m (11 ft 3 in) |
|
|
750 V DC Overhead |
[4][5] |
Basel, Switzerland |
Basler Verkehrs-Betriebe |
|
2014-2017 |
60 |
5/7 |
1000 mm |
31.8 m (104 ft 4 in)/43.2 m (141 ft 9 in) |
2.3 m (7 ft 7 in) |
|
|
|
750 V DC Overhead |
[6] |
Antwerp and Ghent, Belgium |
De Lijn |
|
2014-2016 |
38 five section, 50 seven section |
5/7 |
1000 mm |
31.4 m (103 ft 0 in)/42.7 m (140 ft 1 in) |
2.3 m (7 ft 7 in) |
|
|
|
750 V DC Overhead |
[7][8] |
Suzhou New District, Suzhou, China |
Suzhou New District Tram Co., Ltd. |
China's first tender for modern 100% low-floor trams, based on Bombardier Flexity 2 technology, Bombardier's partner CSR Nanjing Puzhen Rolling Stock Co., Ltd. (CSR Puzhen) will build the trams, Bombardier will support the project under a technology license agreement. |
2015 |
18 |
5 |
1435 mm |
31.8 m (104 ft 4 in) |
2.65 m (8 ft 8 in) |
N/A (under construction) |
N/A (under construction) |
N/A (under construction) |
N/A (under construction) |
[9]
[10] |
References
External links