Framingham Assembly

Framingham Assembly was a General Motors factory in Framingham, Massachusetts which opened in 1947.

History and models

The plant was built on the location of Framingham Airport, and ground was broken in 1945.[1] The plant cost $12 million and was one of three new plants that year. At one point, the Framingham Assembly plant was the largest automotive manufacturing plant in the state, employing over 1,500 workers from Massachusetts, Rhode Island and New Hampshire.

The first vehicle, produced on 26 February 1948, was a Buick, with 23,388 more produced that first year. The factory was used by "BOP" (Buick, Oldsmobile, Pontiac) and was under the management of GM's newly created Buick-Oldsmobile-Pontiac Assembly Division created in 1945. The factory had produced 697,574 cars by 1959. In August of that year, it became part of Fisher Body, producing Chevrolet, Pontiac, and Oldsmobile cars.

The factory was re-purposed again in May, 1968, changing from separate Fisher Body and Chevrolet Division operations to a combined operation under the new GM Assembly Division, to produce the Chevrolet Chevelle and Pontiac Le Mans. The Pontiac GTO was added in 1969. The Buick Skylark and Oldsmobile Cutlass were added in 1970. In 1981, the Chevrolet Celebrity and Pontiac 6000 were produced, with the Oldsmobile Cutlass Ciera added for the 1983 model year.

Closure

The Framingham location was the center of several contentious tug-of-wars between Governor Michael Dukakis and local politician Anthony M. Colonna. After the town refused to sell General Motors a 35-acre (140,000 m2) town owned piece of property GM desired for the construction of a new paint and plastics facility,[2] Dukakis used the state's power of eminent domain to take the property from the town and sell it to GM so the company could construct the $224 million facility. Colona, head of the town department public works and a powerful local politician, had desired a new, unified DPW facility to be constructed on the site. After the taking, state officials and executives at GM claimed that Colonna used his political influence in the community to delay the company's expansion of the facility and drum up support against the company.[3][4]

When the facility was closed, GM stated that it was due primarily to a slowdown in the economy as well as the relatively small size of the facility. However, GM spokesperson Mark Leddy stated that local officials in Framingham were also partially to blame, declaring "You look at your labor climate, your relationship with the community and the quality of product being built at the plant" when explaining why the company chose to shutter the unit.[5]

The plant was idled on October 4, 1982, with a single shift recalled on March 14, 1983. The second shift started again on December 12, 1983. The factory was closed permanently on August 1, 1989.

Current use

The facility is now the location of an ADESA automobile, truck, and boat warehouse and live auction site. The company claims that the facility is the largest indoor auction house in the world, capable of housing 10,000 autos and 4,000 people.

Framingham Assembly was located just South of downtown Framingham at Loring Drive and Western Avenue. The address of the ADESA auction site is 63 Western Ave.

A small landfill formerly used by General Motors at the site still exists and is part of the "Old GM", the leftover portions of the company after the 2009 bankruptcy. The administrative trust overseeing the former corporate assets has the property up for sale as of June 2012, but does not expect a buyer due to the nature of the facility.[6]

See also

Buick-Oldsmobile-Pontiac Assembly Division (1945-1965)

Plants operating under Chevrolet Assembly management prior to General Motors Assembly Division management (most established pre-1945) were located at St. Louis, Missouri; Janesville, Wisconsin; Buffalo, New York; Norwood, Ohio; Flint (#2), Michigan; Oakland, California; Tarrytown, New York; Lakewood, Georgia; Leeds, Missouri; Baltimore, Maryland; Los Angeles (Van Nuys), California; Ypsilanti (Willow Run), Michigan; and Lordstown, Ohio. Framingham, Massachusetts is unusual in that it changed from B-O-P to Chevy management prior to becoming GMAD. The terminology is confusing because most plants assembled more than just Chevrolet or B-O-P and refers to the management structure only. In addition, Buick assembled cars at their "home" plant in Flint, Michigan; Oldsmobile at Lansing, Michigan; Pontiac at Pontiac, Michigan; and Cadillac at Detroit, Michigan.[7]

References

  1. ↑ "Abandoned & Little-Known Airfields: Southwestern Massachusetts". Abandoned & Little-Known Airfields. 3 October 2012. Retrieved 29 December 2013.
  2. ↑ Ross, Philp E. (February 2, 1989). "G.M. to Shut Its Plant Near Boston". The New York Times. pp. D3. Retrieved 15 January 2010.
  3. ↑ Patterson, Gregory A. (February 4, 1987). "GM to Close Framingham Plant". The Boston Globe. pp. A1.
  4. ↑ Beam, Alex (November 15, 1987). "The two faces of Tony Colonna". The Boston Globe. pp. A1.
  5. ↑ Kranish, Michael; Bruce Mohl (November 5, 1987). "GM to Close Framingham Plant Nov. 30 3, 700 to be put out of work". The Boston Globe. pp. A1.
  6. ↑ Micheline, Maynard (20 June 2012). "This Is What’s Left Of Old GM". Jalopnik. Gawker Media. Retrieved 20 June 2012.
  7. ↑ http://vcca.org/forum/ubbthreads.php/topics/99892/Re_Fisher_Body_Company

Coordinates: 42°15′45.79″N 71°24′42.78″W / 42.2627194°N 71.4118833°W / 42.2627194; -71.4118833

This article is issued from Wikipedia - version of the Friday, November 27, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.