Franklin PS-2

PS-2
Franklin PS-2 training glider is about to be towed aloft by the specially modified car in front.
Role Glider
National origin United States
Manufacturer Franklin Glider Corporation
Designer R. E. Franklin
First flight 1930
Introduction 1930
Variants Stevens SU-1

The Franklin PS-2 is an American, high-wing, strut-braced, single seat, glider that was designed by R. E. Franklin and produced by the Franklin Glider Corporation starting in 1930.[1][2]

Design and development

The prototype PS-2 was the 50-foot (15 m) wingspan Texaco Eaglet, flown in 1930. The production PS-2 had shorter 36 ft (11.0 m) wings.[1][2]

The PS-2 is constructed with a steel tube fuselage and a wooden wing, all covered in doped aircraft fabric covering. The wings lack spoilers of other glide-path control devices and are supported by dual, parallel struts. The landing gear is a fixed monowheel and a skid.[1][2]

Operational history

Franklin XPS-2

The prototype Eaglet performed a number of long tows, including one flown by Frank Hawks from California to Elmira, New York in 1930[3] and is now in the National Air and Space Museum.[1][2]

In 1934, the PS-2 was the glider of choice for the Lustig Skytrain experiment. The concept was to tow three gliders in tandem, taking off from New York City and releasing one each over Philadelphia, Baltimore and Washington, D.C. The gliders were piloted by Jack O'Meara, PS-2 designer R.E. Franklin and Stan Smith. The Skytrain was intended to be a proof-of-concept for a future airline service, but was not pursued.

The PS-2 was also used in 1934 for a United States Navy primary flight training experiment in Pensacola, Florida, designed by Ralph Barnaby[1][2]

The PS-2 was also flown by many early glider pilots including Richard Chichester du Pont, Warren Eaton, Floyd Sweet and Stan Smith.[1][2]

In 1983, two were reported as being still flown and one was under restoration by the designer's son, Chuck Franklin.[2] The Federal Aviation Administration had seven PS-2s registered in March 2011, including the Franklin-Stevens PS-2.[4]

Variants

Texaco Eaglet
Prototype with 50-foot (15 m) span wings[1][2]
PS-2
Production model with a 36 ft (11.0 m) wingspan[1][2]
Franklin-Stevens PS-2
Modified model[5]

Aircraft on display

Specifications (PS-2)

Data from Sailplane Directory and Soaring[1][2]

General characteristics

Performance

See also


References

  1. 1 2 3 4 5 6 7 8 9 10 11 Activate Media (2006). "PS-2 Franklin". Retrieved 24 March 2011.
  2. 1 2 3 4 5 6 7 8 9 10 11 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 12. Soaring Society of America, November 1983. USPS 499-920
  3. "Franklin "Texaco Eaglet"". National Air and Space Museum. Retrieved 31 December 2014.
  4. Federal Aviation Administration (March 2011). "Make / Model Inquiry Results". Retrieved 24 March 2011.
  5. 1 2 National Soaring Museum (2011). "Sailplanes in Our Collection". Retrieved 26 February 2011.
  6. US Southwest Soaring Museum (2010). "Sailplanes, Hang Gliders & Motor Gliders". Retrieved 26 May 2011.

External links

Wikimedia Commons has media related to Franklin PS-2.
This article is issued from Wikipedia - version of the Sunday, July 12, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.