Shock (fluid dynamics)

Shock is an abrupt discontinuity in the flow field. It occurs in flows when the local flow speed exceeds the local sound speed. More specifically, it is a flow whose Mach number exceeds 1.

Explanation of phenomena

Shock is formed due to coalescence of various small pressure pulses. Sound waves are pressure waves and it is at the speed of the sound wave the disturbances are communicated in the medium. When an object is moving in a flow field the object sends out disturbances which propagate at the speed of sound and adjusts the remaining flow field accordingly. However, if the object itself happens to travel at speed greater than sound, then the disturbances created by the object would not have traveled and communicated to the rest of the flow field and this results in an abrupt change of property, which is termed as shock in gas dynamics terminology.

Shocks are characterized by discontinuities changes in flow properties such as velocity, pressure, temperature, etc. Typically shock thickness is of a few mean free paths (of the order of 10−8 m). Shocks are irreversible occurrence in supersonic flows (i.e. the entropy increases).

Normal shock formulas

\mathbf{T_{02}}=\mathbf{T_{01}}
M_{2}=(\frac{\frac{2}{\gamma -1} + {M_{1}}^{2}}{\frac{2\gamma}{\gamma-1}{M_{1}}^{2} - 1})^{0.5}
\frac{p_{2}}{p_{1}}=\frac{1+\gamma M_{1}^{2}}{{1+\gamma M_{2}^{2}}} = \frac{2\gamma}{\gamma+1}M_{1}^2-\frac{\gamma-1}{\gamma+1}
\frac{T_{2}}{T_{1}}=\frac{1+\frac{\gamma -1}{2} M_{1}^{2}}{{1+\frac{\gamma -1}{2} M_{2}^{2}}} = \frac{(1+\frac{\gamma -1}{2} M_{1}^{2})(\frac{2\gamma}{\gamma - 1}M_{1}^{2}-1)}{\frac{(\gamma+1)^2M_{1}^2}{2(\gamma-1)}}
\frac{a_{2}}{a_{1}}={(\frac{T_{2}}{T_{1}})}^{0.5}
\frac{\rho_{2}}{\rho_{1}}=\frac{p_{2}}{p_{1}}\frac{T_{1}}{T_{2}}
\frac{p_{01}}{p_{1}}=(1+\frac{\gamma-1}{2}M_{1}^2)^{\frac{\gamma}{\gamma-1}}
\frac{p_{02}}{p_{2}}=(1+\frac{\gamma-1}{2}M_{2}^2)^{\frac{\gamma}{\gamma-1}}

Where, the index 1 refers to upstream properties, and the index 2 refers to down stream properties. The subscript 0 refers to total or stagnation properties. T is temperature, M is the mach number, P is pressure, ρ is density, and γ is the ratio of specific heats.

See also


This article is issued from Wikipedia - version of the Wednesday, February 18, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.