Gemini Guidance Computer
Gemini Guidance Computer in National Air and Space Museum | |
Invented by | IBM Federal Systems Division |
---|---|
Manufacturer | IBM Federal Systems Division |
Introduced | 1965 |
Discontinued | 1966 |
Type |
Avionics Guidance Computer |
Processor | Discrete IC RTL based |
Frequency | 7.143 kilohertz clock |
Memory | 39-bit words memory, each composed of three 13-bit "syllables", 4096 words of memory, in a ferrite core array. |
Ports | Modular Display Keyboard (MDK), Modular Display Readout (MDR), Attitude Control and Maneuver Electronics (ACME), Inertial Measurement Unit (IMU), Horizon Sensors, Time Reference System (TRS)[1] |
Power consumption | 28V DC |
Weight | 58.98 pounds (26.75 kg) |
Dimensions | 18.9"(H)×14.5"(W)×12.75"(D) |
The Gemini Guidance Computer (sometimes Gemini Spacecraft On-Board Computer (OBC)) was a digital, serial computer designed for Project Gemini, America's second manned space project.[2] The computer, which facilitated the control of mission maneuvers, was designed by the IBM Federal Systems Division.[3]
Functionality
The Gemini Guidance Computer was responsible for the following functions:[3][2]
- Ascent - serves as a backup guidance system. The switchover is manually controlled by the astronauts
- Orbital flight - provides a navigation capability to the astronauts to determine the time of retrofire and to select the landing site for safe reentry in the case of an emergency. (on extended missions ground data may become unavailable when ground data network rotates out of the orbital plane.)
- Rendezvous - serves as primary reference by providing guidance information to the astronauts. The orbit parameters are determined by the ground tracking which are then sent to the spacecraft; the guidance computer was responsible for processing the information along with sensed spacecraft attitude. The information was presented to the astronauts in terms of spacecraft coordinates.
- Reentry - feeds commands directly to the reentry control system for automatic reentry or provides the guidance information to the astronauts for manual reentry.
Specs
- The computer, which was very similar to the Saturn Launch Vehicle Digital Computer, weighed 58.98 pounds (26.75 kg) and was powered by 28V DC. During a short power outage it could be powered by the Auxiliary Computer Power Unit (ACPU)
- 39-bit words memory, each composed of three 13-bit "syllables"
- ferrite core memory of 4096 words[4]
- Two's complement integer arithmetic
- 7.143 kilohertz clock (140 μs per instruction); all instructions took a single cycle except for multiplication and division
References
- ↑ http://www.ibiblio.org/apollo/Gemini.html#Peripheral_Devices
- 1 2 McDonnell Corporation, NASA Project Gemini Familiarization Manual, 1965, vol. 2, pp. 8.7,8.45.
- 1 2 8. J. C. Hundley and R. A. Watson, "A Digital Computer in Orbital Flight," TR 63-825-892, IBM Federal Systems Division, Owego, New York, October 1964.
- ↑ Computers in Spaceflight: The NASA Experience, chapter one
External links
Wikimedia Commons has media related to Gemini Guidance Computer. |
As of this edit, this article uses content from "Gemini Guidance Computer", which is licensed in a way that permits reuse under the Creative Commons Attribution-ShareAlike 3.0 Unported License, but not under the GFDL. All relevant terms must be followed.
|
|
This article is issued from Wikipedia - version of the Wednesday, April 20, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.