Geordie lamp

Stephenson's safety lamp shown with Davy's lamp on the left

The Geordie lamp was a safety lamp for use in flammable atmospheres, invented by George Stephenson in 1815 as a miner's lamp to prevent explosions due to firedamp in coal mines.

Origin

In 1815, Stephenson was the engine-wright at the Killingworth Colliery in Northumberland and had been experimenting for several years with candles close to firedamp emissions in the mine. In August he ordered an oil lamp which was delivered on 21 October and tested by him in the mine in the presence of explosive gases. He improved this over several weeks with the addition of capillary tubes at the base so that it gave more light and tried new versions on 4 and 30 November. This was presented to the Literary and Philosophical Society (Lit & Phil) of Newcastle upon Tyne on the 5th December 1815.[1]

Although controversy arose between Stephenson's design and the Davy lamp (invented by Humphry Davy in the same year), Stephenson's original design worked on significantly different principles.[2] If the only way air could get to the flame was restricted (a baseplate pierced by a number of small-bore brass tubes was the usual way of doing this) and the lamp body above the flame lengthened, then the same amount of air could get to the flame, but would pass through the flow restriction at a velocity higher than the velocity of the flame in a mixture of firedamp (mostly methane) and air. This, then, prevented an explosive backblast that might light the surrounding air.

One advantage of Stephenson's design over Davy's was that if the proportion of firedamp became too high, his lamp would be extinguished, whereas Davy's lamp could become dangerously hot. This was illustrated in the Oaks colliery at Barnsley on 20 August 1857 where both types of lamp were in use.[3]

Stephenson's design used glass to surround the flame, which cut out less of the light than Davy's, where the gauze surrounded it.[4] But this also posed the danger of breakage in the harsh conditions of mineworking, a problem which was not resolved until the invention of safety glass. Stephenson tried several different designs in early years and later adopted Davy's gauze in preference to the tubes and it was this revised design that was used for most of the 19th century as the Geordie lamp.

The Geordie lamp continued to be used in the north-east of England through most of the 19th century, until the introduction of electric lighting.

Plate 1 and descriptive text for this, and plate 2, from page 32-33 of Report Upon the Claims of Mr. George Stephenson, Relative to the Invention of His Safety Lamp, by the Committee Appointed at a Meeting Holden in Newcastle November 1st 1817, original tract held in the North of England Institute of Mining and Mechanical Engineers
George Stephenson's safety lamp as drawn in 1817.

See also

References

Notes

Bibliography

Further reading

This article is issued from Wikipedia - version of the Saturday, January 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.