Gilpin's Falls Covered Bridge

Gilpin's Falls Covered Bridge

Gilpins Falls covered bridge
Nearest city North East, Maryland
Coordinates 39°38′55.8″N 75°57′20.1″W / 39.648833°N 75.955583°W / 39.648833; -75.955583Coordinates: 39°38′55.8″N 75°57′20.1″W / 39.648833°N 75.955583°W / 39.648833; -75.955583
Area 1.3 acres (0.53 ha)
Built 1859 (1859)
Built by Johnson, George
Architectural style Burr Arch Truss Bridge
NRHP Reference # 08001125[1]
Added to NRHP December 3, 2008

The Gilpin's Falls Covered Bridge is a Burr arch through truss wooden covered bridge near North East, Cecil County, Maryland, United States. The bridge was constructed by local Cecil County bridgewright Joseph George Johnson in the autumn and winter of 1860-61 across North East Creek. The bridge was erected adjacent to and upstream of Samuel Gilpin's mills and dam and crosses the millpond formed by it. This bridge has a span of 100 feet (30 m) and a total length of 119 feet (36 m) with its shelter panel overhangs, is 13.5 feet (4.1 m) wide, and is closed to all vehicular traffic.[2][3]

The structure was restored in 1959 by the State Roads Commission and the Historical Society of Cecil County. In 2010 the bridge was rehabilitated by engineers Wallace, Montgomery & Associates, LLP; contractor Kinsley Construction; and specialist bridgwrighting subcontractors, Barns & Bridges of New England, the Truax Timberwright Woodworks, and New World Restoration.

Gilpin's Falls Covered Bridge was listed on the National Register of Historic Places in 2008.[1]

Construction details

The bridge's trusses, floor beams, ties, and lateral bracing systems are framed almost entirely of Eastern White Pine (Pinus strobus), a species typically favored for wooden bridge framing in areas of the country where it was found, for its strength-to-weight ratio. So favored for this purpose, it was commonly imported into areas where it was unavailable as an indigenous species (minimizing dead load a strategy for increasing capacity for live load). Original rafters were quite easily identifiable from those replaced after the 1958 roof collapse, and were (as are the newly replicated replacements) framed with tulip poplar (Liriodendron tulipifera), also a lightweight species favored by the bridgewrighting community where available. Replicated rafters, like their predecessors, are tapered over their length, one inch wider at their tail than at the ridge. This was likely not an esthetic choice, but done as part of an overall strategy to minimize dead load. The original floor beams were replaced sometime in the 1920s, the bridges final decade of service, with mixed species ash and oak. This was an attempt to increase load capacity. The only original white pine floorbeam to escape replacement was the one found at the centerline of truss, which was tenoned through the king post at midspan. All others were bolted to the sides of their adjacent posts, and were easily replaced. This strategy seems to have failed (the bridge was bypassed in the following decade) and the additional weight was part of the reason why the bridge's framing became severely distorted in the decades of neglect to follow. These hardwood replacements had heavy infestations of deathwatch and powderpost beetles (Bostrichoidea) and were again replaced with timbers of appropriate species in the recently completed restoration.

Gallery

See also

References

  1. 1 2 Staff (2010-07-09). "National Register Information System". National Register of Historic Places. National Park Service.
  2. ↑ Eric Sennstrom (April 2008). "National Register of Historic Places Registration: Gilpin's Falls Covered Bridge" (PDF). Maryland Historical Trust. Retrieved 2016-01-01.
  3. ↑ "The Gilpin Covered Bridge in Cecil County, Maryland". Historic Covered Bridges in Maryland. Maryland State Highway Admiistration. 2008-10-03.

External links

This article is issued from Wikipedia - version of the Monday, April 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.