Global Trade Item Number

Global Trade Item Number (GTIN) is an identifier for trade items developed by GS1 (comprising among others of the former EAN International and Uniform Code Council).[1] Such identifiers are used to look up product information in a database (often by entering the number through a bar code scanner pointed at an actual product) which may belong to a retailer, manufacturer, collector, researcher, or other entity. The uniqueness and universality of the identifier is useful in establishing which product in one database corresponds to which product in another database, especially across organizational boundaries.

GTINs may be 8, 12, 13 or 14 digits long, and each of these 4 numbering structures are constructed in a similar fashion, combining Company Prefix, Item Reference and a calculated Check Digit (GTIN-14 adds another component- the Indicator Digit, which can be 1-8). GTIN-8s will be encoded in an EAN-8 bar code. GTIN-12s may be shown in UPC-A, ITF-14, or GS1-128 bar codes. GTIN-13s may be encoded in EAN-13, ITF-14 or GS1-128 bar codes, and GTIN-14s may be encoded in ITF-14 or GS1-128 bar codes. The choice of bar code will depend on the application; for example, items to be sold at a retail establishment should be marked with EAN-8, EAN-13, UPC-A or UPC-E bar codes.

The EAN-8 code is an eight-digit bar code used usually for very small articles, such as chewing gum, where fitting a larger code onto the item would be difficult. Note: the equivalent UPC small format barcode, UPC-E,encodes a GTIN-12 with a special Company Prefix that allows for "zero suppression" of 4 zeros in the GTIN-12. The GS1 encoding/decoding rules state that the entire GTIN-12 is used for encoding and that the entire GTIN-12 is to be delivered when scanned.

Format

Name Former name(s)
GTIN-14 DUN-14, ITF
GTIN-13 EAN·UCC-13, EAN-13, CIP
GTIN-12 EAN·UCC-12, UCC-12, UPC
GTIN-8 EAN·UCC-8, EAN-8
Num.-system GTIN-Format
Position of digits T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 T14
GTIN-14 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14
GTIN-13 0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13
GTIN-12 0 0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12
GTIN-8 0 0 0 0 0 0 N1 N2 N3 N4 N5 N6 N7 N8

The numbering structure is as follows:

All books and serial publications sold internationally (including those in U.S. stores) have GTIN (GTIN-13) codes. The book codes are either constructed by prefixing the old ISBN 10 number with 978, and recalculating the trailing check digit, or from 1 January 2007 issued as thirteen digits starting with 978 (eventually 979 as the 978 ranges are used up).

Each type of trade item is given its own GTIN, with the understanding that there is a potential need to retrieve pre-defined information from such items; this product or service may be priced, ordered, or invoiced at any point in the supply chain. This includes individual items as well as all of their different packaging configurations.

In February 2005, employees and booksellers of Barnes & Noble were informed that beginning at the end of March, their computer systems were going to add the ability to search by EAN to facilitate a switch over to the EAN (sometimes called ISBN 13 when used for books) from the current standard of ISBN 10 codes. Receipts will now list the EAN number, rather than the ISBN 10 number. Since all existing 10-digit ISBN codes are mapped to a subset of the space of 13-digit EANs, booksellers' computer systems will still be able to search by ISBN (and UPC in the music departments) to help booksellers locate older books that have not been assigned an EAN.

By January 1, 2005 the U.S. ISBN agency requires publishers be able to communicate ISBNs as GTIN-13s. The new 979 prefix for publications will be available on January 1, 2007 or upon eventual assignment of the last 978 prefix.

Prefixes

Further information: List of GS1 country codes

Each country has one or several blocks of GS1 Company Prefixes to assign.

Some special ranges exist. The usage for some is GS1 Member Organisation (GS1 MO) specific. The GS1 Company Prefixes that begin with the 3 digits listed below are used to construct what are considered RCN's (Restricted Circulation/Distribution Numbers) or are specific to a particular industry, such as the publishing industry:

Comparison of UPC, EAN and GTIN

The Universal Product Code, UPC, has been a dominant barcode standard in North America since it was established in the 1970s. It encodes a 12 digit number (GTIN-12), unique to a product, which allows it to be scanned and read in virtually any major retail establishment. A 6 digit "zero-suppressed" version (UPC-E) is available for items which are too small to allow the larger UPC-A version to be printed.

The EAN-13 and EAN-8 are other point of sale barcodes that are widely used outside of North America. A UPC formed in the United States can be transformed into an EAN by prefixing it with a zero.

The Global Trade Item Number, GTIN, is an identification number that may be encoded in UPC-A, UPC-E, EAN-8 & EAN-13 barcodes as well as other barcodes in the GS1 System.

See also

Templates

References

  1. ↑ GTIN DEFINITION

External links

This article is issued from Wikipedia - version of the Tuesday, March 08, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.