Goodwin Buckshot

Buckshot
Role Powered parachute
National origin United States
Manufacturer FL Goodwin
Introduction 1998
Status Production completed
Unit cost
US$9000 (2001)

The Goodwin Buckshot is an American powered parachute that was designed and produced by FL Goodwin of Phoenix, Arizona and introduced in 1998.[1]

The aircraft was distributed by Paraborne Aviation of Kissimmee, Florida.[1] The Buckshot is out of production.

Design and development

The aircraft was designed as a US FAR 103 Ultralight Vehicles two-seat trainer. It features a parachute-style high-wing, two seats in side-by-side configuration, tricycle landing gear and a single engine in pusher configuration. The standard engines supplied were the 45 hp (34 kW) 2si 460F-45 and the 45 hp (34 kW) Zenoah G-50 engine, although any light two-cylinder, two-stroke engine can be used.[1]

The aircraft is built from bolted-together anodized aluminum tubing to save weight. Inflight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has tiller-controlled nosewheel steering. The main landing gear does not incorporate suspension and the aircraft relies on large tundra tires to provide this.[1] ,

Specifications (Buckshot)

Data from Cliche[1]

General characteristics

Performance


References

  1. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page D-4. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4
This article is issued from Wikipedia - version of the Wednesday, June 24, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.