Kilogram-force

Not to be confused with Kilopound.

The kilogram-force (kgf or kgF), or kilopond (kp, from Latin pondus meaning weight), is a gravitational metric unit of force. It is equal to the magnitude of the force exerted by one kilogram of mass in a 9.80665 m/s2 gravitational field (standard gravity, a conventional value approximating the average magnitude of gravity on Earth).[1] Therefore one kilogram-force is by definition equal to 9.80665 N.[2][3] Similarly, a gram-force is 9.80665 mN, and a milligram-force is 9.80665 µN. One kilogram-force is approximately 2.204622 pounds-force.

Kilogram-force is a non-standard unit and does not comply with the SI Metric System.

History

The gram-force and kilogram-force were never well-defined units until the CGPM adopted a standard acceleration of gravity of 980.665 cm/s2 for this purpose in 1901, though they had been used in low-precision measurements of force before that time. The kilogram-force has never been a part of the International System of Units (SI), which was introduced in 1960. The SI unit of force is the newton.

Prior to this, the unit was widely used in much of the world and it is still in use for some purposes. The thrust of a rocket engine, for example, was measured in kilograms-force in 1940s Germany, in the Soviet Union (where it remained the primary unit for thrust in the Russian space program until at least the late 1980s), and it is still used today in China and sometimes by the European Space Agency.

The term Kilopond has been declared obsolete[4] and should no longer be used.

It is also used for tension of bicycle spokes,[5] for informal references to pressure in kilograms per square centimeter (1 kp/cm2) which is the technical atmosphere (at) and very close to 1 bar and the standard atmosphere (atm), for the draw weight of bows in archery, and to define the "metric horsepower" (PS) as 75 metre-kiloponds per second.[2] In addition kilograms force is the standard unit used for Vickers Hardness testing.

Three approaches to metric mass and force units[6][7]
Base force, length, time weight, length, time mass, length, time
Force (F) F = ma = wa/g F = ma/gc = wa/g F = ma = wa/g
Weight (w) w = mg w = mg/gcm w = mg
System GM M CGS MTS SI
Acceleration (a) m/s2 m/s2 Gal m/s2 m/s2
Mass (m) hyl kg g t kg
Force (F) kp kp dyn sn N
Pressure (p) at atm Ba pz Pa

Related units

The tonne-force, metric ton-force, megagram-force, and megapond (Mp) are each 1000 kilograms-force.

The decanewton or dekanewton (daN) is used in some fields as an approximation to the kilogram-force, being exactly rather than approximately 10 newtons.

Units of force
newton
(SI unit)
dyne kilogram-force,
kilopond
pound-force poundal
1 N ≡ 1 kgm/s2 = 105 dyn ≈ 0.10197 kp ≈ 0.22481 lbF ≈ 7.2330 pdl
1 dyn = 105 N ≡ 1 gcm/s2 ≈ 1.0197 × 106 kp ≈ 2.2481 × 106 lbF ≈ 7.2330 × 105 pdl
1 kp = 9.80665 N = 980665 dyn gn(1 kg) ≈ 2.2046 lbF ≈ 70.932 pdl
1 lbF ≈ 4.448222 N ≈ 444822 dyn ≈ 0.45359 kp gn(1 lb) ≈ 32.174 pdl
1 pdl ≈ 0.138255 N ≈ 13825 dyn ≈ 0.014098 kp ≈ 0.031081 lbF ≡ 1 lbft/s2
The value of gn as used in the official definition of the kilogram-force is used here for all gravitational units.

See also

References

  1. The international system of units (SI)United States Department of Commerce, NIST Special Publication 330, 2008, p. 52
  2. 1 2 NIST Guide for the Use of the International System of Units (SI) Special Publication 811, (1995) page 51
  3. BIPM SI brochure, chapter 2.2.2.
  4. European Economic Community, Council Directive of 18 October 1971 on the approximation of the laws of the Member States relating to units of measurement (Directive 71/354/EEC), Annex, Chapter III.
  5. Park Tool. "Balancing wheel tension with the TM-1 Spoke Tension Meter". Cyclingnews. Retrieved 2013-09-03. The recommended tension for spokes in bicycle wheels can be as low as 80 Kilograms force (Kfg) and as high as 230 Kilograms force.
  6. Michael R. Lindeburg (2011). Civil Engineering Reference Manual for the Pe Exam. Professional Publications. ISBN 1591263417.
  7. Wurbs, Ralph A, Fort Hood Review Sessions for Professional Engineering Exam (PDF), retrieved October 26, 2011

External links

This article is issued from Wikipedia - version of the Saturday, January 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.