Ground lift

In sound recording and reproduction, ground lift or earth lift is a technique used to reduce or eliminate ground-related noise which is done by connecting signal lines between two or more pieces of equipment so ground loop is established. It interrupts the ground line at some point. It is particularly effective at eliminating ground loops, but it may also increase or decrease noise from other sources.[1]

XLR connectors used for audio.

If all pieces of equipment are tied to a common ground reference without establishing ground loop, no current flows in the ground conductors and cable shields, and no noise is introduced into signal circuits. In applications such as sound reinforcement for a concert, however, it is difficult to ensure all equipment shares a common ground reference.[1]

Ground lift switch

Professional audio equipment intended for use with balanced lines may have a ground lift switch for the cable shield. The ground lift switch eliminates unwanted hum and buzz by interrupting the ground loops between equipment, preventing current flow along the cable shield between two devices. The switch disconnects pin 1 on the XLR jack, which is connected to the braid or foil shield in the cable and acts as the ground point of the circuit.

Ground lifts do not conform to Audio Engineering Society standard AES48.[2]

Other ways of isolating the cable shield

Specially wired signal adaptors may leave the shield connection disconnected, or connected to safety ground through an RF bypass capacitor. Isolation transformers may be used to convert from balanced lines to single-ended inputs, and also to isolate the cable shield from the equipment safety ground.

Safety

Removal of the safety ground connection on equipment can expose users to an increased danger of electric shock and may contradict wiring regulations.[1] The safety ground is disconnected by an adaptor (cheater plug) in a power lead in which the ground conductor is deliberately disconnected, or by cutting a ground pin in the power plug. If a fault develops in any line-operated equipment, cable shields and equipment enclosures may become energized, creating an electric shock hazard. For example, the metal shell of a stage microphone or the strings of a guitar may become energized, creating a hazard to performers.[3] (See Leslie Harvey, John Rostill, Keith Relf)

See also

References

  1. 1 2 3 Douglas Self, Self on Audio 2nd edition, Newnes, 2006 ISBN 0-7506-8166-7 pp. 113-116
  2. "Standards and Information Documents (AES48-2005)" (PDF).
  3. "How to not kill a performer on a stage by electrocution" (PDF).

External links


This article is issued from Wikipedia - version of the Monday, January 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.