Queenston-class auxiliary vessel

The Queenston class of ships will be based on the Berlin-class replenishment ship
Class overview
Name:	Queenston class
Builders:	Seaspan Marine Corporation
Operators:	Royal Canadian Navy
Preceded by:	Protecteur class
Planned:	2-3
Completed:	0
General characteristics
Type:	Auxiliary vessel
Displacement:	20,240 tonnes
Length:	173.7 m (569 ft 11 in)
Beam:	24 m (78 ft 9 in)
Height:	17.5 m (57 ft 5 in)
Draught:	7.6 m (24 ft 11 in)
Installed power:	2 × MAN 12V32/40 (2 x 7,200 kilowatts (9,700 hp))
Propulsion:	Two shafts; four-bladed controllable pitch propellers One bow thruster
Speed:	20 knots (37 km/h)
Range:	16,000 kilometres (9,900 mi)+
Endurance:	45 days
Complement:	139 (+ 94)
Armament:	4 × MLG 27 mm autocannons Stinger surface-to-air missile (MANPADS)
Aircraft carried:	2 x Sikorsky CH-148 Cyclone
Aviation facilities:	Hangar and flight deck

The Queenston class is a class of naval auxiliaries for the Royal Canadian Navy (RCN).^[1] The class began as the Joint Support Ship Project, a Government of Canada procurement project for the RCN that is part of the National Shipbuilding Procurement Strategy. It will see the RCN acquire two multi-role vessels to replace the Protecteur-class auxiliary oiler replenishment (AOR) vessels currently operated by the RCN.^[2]

The project has suffered from considerable delays. Originally announced in 2004, a contract for the construction of these ships was to have been signed in 2009 which would have seen the first vessel available for operational service in 2012. In 2010 the federal government grouped the Joint Support Ship Project under the National Shipbuilding Procurement Strategy which was finalized in October 2011. Currently the federal government is in contract negotiations with the winning proponent Seaspan Marine Corporation for building the Joint Support Ship Project and several other non-combat ship procurements for the RCN and the Canadian Coast Guard.

On 2 June 2013, it was announced that ThyssenKrupp Marine Systems Canada's Berlin-class AOR was selected as the design for the Joint Support Ship Project.^[3][4]

In order to speed construction of the Queenston-class naval auxiliaries, the delivery of the new polar icebreaker, CCGS John G. Diefenbaker, will be delayed until the 2020s.

Class name

On 25 October 2013, the Minister of National Defence announced the JSS has been named Queenston class with two ships named, HMCS Queenston and HMCS Châteauguay.^[5] Their namesakes are the Battle of Queenston Heights and the Battle of Châteauguay, two battles during the War of 1812. A possible third ship in the class could be built, to be named HMCS Crysler's Farm, also named after a battle from the War of 1812.^[6]

Purpose

The Joint Support Ship Project consists of 2–3 multi-role vessels that will replace the underway replenishment capability of the Protecteur-class auxiliary vessel, as well as provide basic sealift for the Canadian Army, support to forces ashore, and command facilities for a Canadian Forces "joint force" or "naval task group".^[7]

The Joint Support Ship Project should not be confused with the Amphibious Assault Ship Project, which is another separate procurement project also under consideration by the Royal Canadian Navy; planning for the Amphibious Assault Ship Project is at a much earlier stage.

Proposed ship capabilities

The Joint Support Ship Project envisions several multi-role vessels capable of supporting the Royal Canadian Navy's warships at sea, as well as providing strategic sealift and some airlift for naval task groups or army operations. The vessels will have a multi-purpose covered deck with the ability to carry up to 10,000 tonnes of ship fuel, 1,300 tonnes of aviation fuel, 1,100 tonnes of ammunition as well as 1,000–1,500 lane metres of deck space for carrying vehicles and containerized cargo. The vessels will also have hospital facilities as well as a large helicopter deck with two landing spots, hangar space for four helicopters, and a roll-on/roll-off deck for vehicles onto a dock.^[8]

Ship particulars

• Crew size 30% to 50% less than current AORs

Survivability

• Self-defence active and passive
• Damaged stability enhanced two-compartment

Sealift

• Deck space (inc. upper deck) 1,000–1,500 lane metres
• Container system

Airlift

• 4 × CH-148 Cyclone
• Enclosed hangar with maintenance and repair facilities

Vessels will be designed with double or triple hulls for storage of petroleum products, unlike the current Protecteur class single-hull vessels.

Joint headquarters support

• Naval communications
• Land communications
• Air communications

Project timeline

• In 2004 the federal government announced that it was commencing the Joint Support Ship Project. Originally, there were four syndicates vying for the contract, led by Irving Shipbuilding, BAE Systems, ThyssenKrupp Marine Systems Canada, and SNC-Lavalin ProFac.
• Two design finalists were selected in November 2006: ThyssenKrupp and SNC-Lavalin ProFac. Under the two remaining proposals, the ships will be built in either Marystown, Newfoundland or Victoria, British Columbia, respectively. A contract for final design and construction was expected in 2008, with the first ship of the class entering service in 2012.
• In January 2007, Canadian media reported that defence planners were considering the retirement of the existing Protecteur class ships by 2010, prior to the delivery of the first replacement vessels in 2012. This news was met with criticism as it would leave MARCOM without an underway replenishment capability for two years.^[9]
• On 22 August 2008 the Minister of Public Works and Government Services, Christian Paradis announced the termination of two procurement processes involving the shipbuilding industry.
• In December 2008 MARCOM officers and defence analysts had been hoping that January's federal budget would have contained up to $500 million in extra funding for the Joint Support Ship Project so that it could be completed. In the same month Defence Minister Peter MacKay suggested that the budget stimulus package would deal with MARCOM's shipbuilding needs. However, there was no extra money for the Joint Support Ship Project and the stimulus package did not address MARCOM's vessel procurement programs. Vice-Admiral Denis Rouleau, spoke to the Standing Committee on National Defence in the House of Commons and indicated that the Department of National Defence would know by summer 2009 how it would move ahead with the Joint Support Ship Project.^[10]
• In June 2009 officials with the Joint Support Ship Project began re-evaluating the type of ship they wished to purchase since the original concept could not be met with the money the government was willing to provide. One option would be to start from scratch and purchase a different type of ship altogether.^[11]
• In September 2009, the Joint Support Ship Project received a new design. Vice-Admiral Dean McFadden, Chief of the Maritime Staff, said that he was ready to submit design and cost estimates to the government and to the Minister of National Defence.^[12]
• In June 2010 the Government of Canada announced that the National Shipbuilding Procurement Strategy would see $35 billion spent over the next 30 years to purchase 28 new large ships and 116 small vessels for Maritime Command and the Canadian Coast Guard. The NSPS was headed by the government's procurement arm, the Department of Public Works and Government Services, with support from Department of Industry, as well as the 2 departments responsible for MARCOM and CCG, the Department of National Defence and Department of Fisheries and Oceans respectively.
• In July 2010, Defence Minister Peter MacKay announced that under the NSPS the federal government would initially purchase two joint support ships (at a cost of $2.6 billion) with options for a third.^[13][14]
• On 11 October 2010 the Government of Canada announced that five shipbuilding companies were "being invited to participate in a request for proposals" for the National Shipbuilding Procurement Strategy.
• On 19 October 2011, the Government of Canada announced the results of the competitive evaluation of bids in the National Shipbuilding Procurement Strategy which saw the $8 billion non-combat ship package, including the Joint Support Ship Project, awarded to Seaspan Marine Corporation in Vancouver, British Columbia.^[15]
• On 2 June 2013, the Government of Canada announced that ThyssenKrupp Marine Systems Canada's Berlin-class AOR was selected as the design for the Joint Support Ship.
• On 11 October 2013, The National Shipbuilding Procurement Strategy (NSPS) Secretariat today announced that Vancouver Shipyards will commence construction on the Joint Support Ships, followed by the Polar Icebreaker, under the NSPS non-combat package. It is expected that construction will begin in 2016-17.^[16]
• On 25 October 2013, the Government of Canada announced that the two ships will be named Her Majesty’s Canadian Ship (HMCS) Queenston and HMCS Châteauguay in recognition of the significant battles of Queenston Heights and Châteauguay during the War of 1812. The class would likely be named Queenston class.^[1]
• In August 2015 Davie Shipyard signed a contract to convert the container ship MS Asterix for the role until the specialized ships were delivered.^[17] The vessel was built in 2010 in Germany and will be converted for use by the RCN until the JSS are ready.

See also

• Arctic Patrol Ship Project
• Amphibious Assault Ship Project
• Almirante Montt - ex-USNS Andrew J. Higgins (T-AO-190) was loaned by the Chilean Navy for the RCN to use on the Pacific Coast for 40 sea days each year from 2015 to 2017.

References

1. Pugliese, David (25 October 2013). "Joint Support Ships to Be Named HMCS Queenston and HMCS Châteauguay". Ottawa Citizen. Ottawa. Retrieved 25 October 2013.
2. Canadian Forces, Future Canadian Amphibious Assault Ship and Joint Support Ship Archived June 9, 2011, at the Wayback Machine.
3. Backgrounder: Joint Support Ship Design Decision Archived June 3, 2013, at the Wayback Machine.
4. McKnight, Zoe (3 June 2013). "Navy adopts German design to be built in North Vancouver". The Vancouver Sun. Retrieved 24 September 2014.
5. "Names chosen for the Royal Canadian Navy's new Joint Support Ships". Government of Canada. Royal Canadian Navy. 28 October 2013. Retrieved 24 September 2014.
6. Pugliese, David (8 April 2016). "Royal Canadian Navy picks a name for a third Joint Support Ship". Ottawa Citizen. Retrieved 17 April 2016.
7. "Canada to build 2 Joint Support Ships". Retrieved 2010-07-14.
8. "Canada’s C$ 2.9B "Joint Support Ship" Project, Take 2". Retrieved 2010-07-14.
9. ""Naval plan 'hare-brained'," The Halifax Chronicle-Herald, 2 Feb 07". Archived from the original on September 27, 2007. Retrieved February 2, 2007.
10. Joint Support Ship Archived July 21, 2011, at the Wayback Machine.
11. http://web.archive.org/web/20120306044059/http://www.ottawacitizen.com/news/todays-paper/Somnia/1696153/story.html. Archived from the original on March 6, 2012. Retrieved June 15, 2009. Missing or empty |title= (help)
12. Ships still on drawing board Archived September 27, 2012, at the Wayback Machine.
13. Weese, Bryn (14 July 2010). "Canadian Navy moves forward on new supply ships". Toronto Sun. Retrieved 24 September 2014.
14. Tutton, Michael (14 July 2010). "Navy to buy two new support ships for $2.6 billion". The Star (Toronto). Retrieved 24 September 2014.
15. Fowlie, Jonathan; Berthiaume, Lee; Hiltz, Robert; White, Marianne (20 October 2011). "Jubilation greets $8-billion shipbuilding contract for B.C.". The Vancouver Sun. Retrieved 24 September 2014.
16. "National Shipbuilding Procurement Strategy Secretariat announces Vancouver Shipyards to build the Joint Support Ships in 2016". Government of Canada. 11 October 2013. Retrieved 24 September 2014.
17. Pugliese, David (26 September 2015). "Canada To Lease Commercial Vessel To Refuel Navy Ships". www.defensenews.com (Tegna). Retrieved 24 October 2015.

External links

• Article from the Canadian American Strategic Review