HMS Hecate (1871)

For other ships of the same name, see HMS Hecate.
Right elevation plan from Brassey's Naval Annual 1888–1889
History
United Kingdom
Name: HMS Hecate
Namesake: Hecate
Builder: J & W Dudgeon, Cubitt Town, London
Cost: £156,782
Laid down: 5 September 1870
Launched: 30 September 1871
Completed: 24 May 1877
Commissioned: April 1872
Out of service: 1901
Refit: 1885–86
Fate: Sold for scrap 12 May 1903
General characteristics
Class & type: Cyclops-class breastwork monitor
Displacement: 3,480 long tons (3,540 t)
Length: 225 ft (68.6 m) (p/p)
Beam: 45 ft (13.7 m)
Draught: 16 ft 3 in (5.0 m) (deep load)
Installed power: 1,579 ihp (1,177 kW)
Propulsion: 2 shafts, 2 inverted compound steam engines
Speed: 10.5 knots (19.4 km/h; 12.1 mph)
Range: 3,000 nmi (5,600 km; 3,500 mi) at 10 kn (19 km/h; 12 mph)
Complement: 156
Armament: 2 × twin 10-inch rifled muzzle loaders
Armour:

HMS Hecate was the last ship completed of the four Cyclops-class breastwork monitors built for the Royal Navy during the 1870s.

Design and description

The Cyclops-class ships were modified versions of the Cerberus class.[1] The ships had a length between perpendiculars of 225 feet (68.6 m), a beam of 45 feet (13.7 m), and a draught of 16 feet 3 inches (4.95 m) at deep load. They displaced 3,480 long tons (3,540 t). Their crew consisted of 156 officers and men.[2] Hydra had two 4-cylinder inverted compound steam engines, each driving a single propeller shaft. The engines produced a total of 1,472 indicated horsepower (1,098 kW) during the ship's sea trials which gave her a maximum speed of 11.2 knots (20.7 km/h; 12.9 mph). The ships carried 250 long tons (250 t) of coal,[3] enough to steam 3,000 nautical miles (5,600 km; 3,500 mi) at 10 knots (19 km/h; 12 mph).[4]

The ships mounted four 10-inch rifled muzzle-loading guns in twin-gun turrets fore and aft of the superstructure. The guns could fire both solid shot and explosive shells.[5] They were mounted on carriages that used hydraulic jacks to elevate and depress the guns.[6]

The Cyclops class had a complete waterline belt of wrought iron that was 8 inches (203 mm) thick amidships and thinned to 6 inches (152 mm) at the ends. The superstructure and conning tower was fully armoured, the reason it was called a breastwork, with 8–9 inches (203–229 mm) of wrought iron. The gun turrets had 10 inches on their faces and 9 inches on the sides and rear. All of the vertical armour was backed by 9–11 inches (229–279 mm) of teak. The decks were 1.5 inches (38.1 mm) thick.[7]

Construction

Together with her sister ships, Cyclops and Gorgon, she was placed on the non-effective list of ships in January 1902,[8] and sold for scrap the following year.

References

  1. Parkes, p. 212
  2. Parkes, p. 213
  3. Ballard, pp. 246–49
  4. Silverstone, p. 169
  5. Gardiner, p. 6
  6. Parkes, p. 212
  7. Parkes, pp. 213–14
  8. "Naval & Military intelligence" The Times (London). Monday, 6 January 1902. (36657), p. 8.
This article is issued from Wikipedia - version of the Sunday, October 11, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.