Hardfacing

Hardfacing is a metalworking process where harder or tougher material is applied to a base metal. It is welded to the base material, and generally takes the form of specialized electrodes for arc welding or filler rod for oxyacetylene and TIG welding. Powder metal alloys are used in (PTA) also called Powder plasma welding system and Thermal spray processes like HVOF, Plasma spray, Spray and Fuse, etc.

Hardfacing may be applied to a new part during production to increase its wear resistance, or it may be used to restore a worn-down surface. Hardfacing by arc welding is a surfacing operation to extend the service life of industrial components, pre-emptively on new components, or as part of a maintenance program.[1] The result of significant savings in machine down time and production costs has meant that this process has been adopted across many industries such as Steel, Cement, Mining, Petrochemical, Power, Sugar cane and Food. According to the results of an experimental study, the SMAW (Shielded Metal Arc Welding) and the GMAW (Gas Metal Arc Welding) hardfacing processes were effective in reducing the wear on the mouldboard ploughshare. With the SMAW and GMAW hardfacing processes, the life span of the ploughshare was increased approximately 2 times [1].[2]

Extensive work in research has resulted in the development of a wide range of alloys and welding procedures. The optimum alloy selection is made considering the component service conditions and feedback of the service performance.

For each industrial application and wear phenomena, there is a welding electrode to provide wear resistance.

Hardfacing can be deposited by various welding methods:

Commonly applied materials include cobalt-based alloys (such as stellite), nickel-based alloys, chromium carbide alloys and NOREM. Hardfacing is sometimes followed by hot stamping to refinish the part or add color or instructional information to the part. Foils or films can be used for a metallic look or other protection.[4]

References

  1. ↑ "ASM Handbook Volume 06: Welding, Brazing, and Soldering" (PDF). www.lincolnelectric.com. Retrieved 9 February 2016.
  2. ↑ "Investigation of the reduction of mouldboard ploughshare wear through hot stamping and hardfacing processes" (PDF). www.tubitak.gov.tr. Retrieved 9 February 2016.
  3. ↑ http://www.thefabricator.com/author/bob-miller (2005-03-08). "Frequently asked questions about hardfacing". www.thefabricator.com. Retrieved 2016-02-09.
  4. ↑ Products, K & B Molded. "Hot Stamped Printing Services | K And B Molded". www.kandbmoldedproducts.com. Retrieved 2016-02-09.

See also

This article is issued from Wikipedia - version of the Wednesday, February 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.