Headroom (audio signal processing)

In digital and analog audio, headroom refers to the amount by which the signal-handling capabilities of an audio system exceed a designated level known as Permitted Maximum Level (PML). Headroom can be thought of as a safety zone allowing transient audio peaks to exceed the PML without damaging the system or the audio signal, e.g., via clipping. Standards bodies differ in their recommendations for PML.

Digital audio

In digital audio, headroom is defined as the amount by which digital full scale (FS) exceeds the PML in decibel (|dB). The European Broadcasting Union (EBU) specifies a PML of 9 dB below 0 dBFS (-9 dBFS), thus giving 9 dB of headroom. An alternative EBU recommendation specifies 24 dB of headroom, which might be used for 24-bit master recordings where it is useful to allow more room for unexpected peaks during live recording.

Analog audio

In analog audio, headroom can mean low-level signal capabilities as well as the amount of extra power reserve available within the amplifiers that drive the loudspeakers.

Alignment level

Main article: Alignment level

Alignment level is an anchor point 9 dB below the nominal level, a reference level that exists throughout the system or broadcast chain, though it may imply different voltage levels at different points in the analog chain. Typically, nominal (not alignment) level is 0 dB, corresponding to an analog sine wave of voltage of 1.23 volts RMS (+4 dBu or 3.47 volts peak to peak). In the digital realm, alignment level is −18 dBFS.

See also

External links

This article is issued from Wikipedia - version of the Tuesday, January 06, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.