Hexafluoroethane

Hexafluoroethane
Structural formula of hexafluoroethane
Ball-and-stick model of the hexafluoroethane molecule
Names
IUPAC name
Hexafluoroethane
Other names
Carbon hexafluoride, 1,1,1,2,2,2-Hexafluoroethane, Perfluoroethane, Ethforane, Halocarbon 116, PFC-116, CFC-116, R-116, Arcton 116, Halon 2600, UN 2193
Identifiers
76-16-4 YesY
ChEBI CHEBI:32905 YesY
ChEMBL ChEMBL116574 YesY
ChemSpider 6191 YesY
EC Number 200-939-8
Jmol interactive 3D Image
PubChem 6431
RTECS number KI4110000
Properties
C2F6
Molar mass 138.01 g.mol−1
Appearance Colorless odorless gas
Density 5.734 kg.m−3 at 24 °C
Melting point −100.6 °C (−149.1 °F; 172.6 K)
Boiling point −78.2 °C (−108.8 °F; 195.0 K)
0.0015%
log P 2
Vapor pressure 2.967 MPa at 20.1 °C

3.0701 MPa at 21 °C

0.000058 mol.kg−1.bar−1
Hazards
Safety data sheet See: data page
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
0
1
0
Flash point Non-flammable
Supplementary data page
Refractive index (n),
Dielectric constantr), etc.
Thermodynamic
data
Phase behaviour
solidliquidgas
UV, IR, NMR, MS
YesY verify (what is YesYN ?)
Infobox references

Hexafluoroethane is a fluorocarbon counterpart to the hydrocarbon ethane. It is a non-flammable gas negligibly soluble in water and slightly soluble in alcohol.

Physical properties

Hexafluoroethane's solid phase has two polymorphs. In the scientific literature, different phase transition temperatures have been stated. The latest works assign it at 103 K (−170 °C). Below 103 K it has a slightly disordered structure, and over the transition point, it has a body centered cubic structure.[1]

Table of densities:

State, temperature Density (kg.m−3)
liquid, −78.2 °C 1608
gas, −78.2 °C 8.86
gas, 15 °C 5.84
gas, 20.1 °C 5.716
gas, 24 °C 5.734

Vapor density is 4.823 (air = 1), specific gravity at 21 °C is 4.773 (air = 1) and specific volume at 21 °C is 0.1748 m3/kg.

Uses

Hexafluoroethane is used as a versatile etchant in semiconductor manufacturing. It can be used for selective etching of metal silicides and oxides versus their metal substrates and also for etching of silicon dioxide over silicon. The primary aluminium and the semiconductor manufacturing industries are the major emitters of hexafluoroethane.

Together with trifluoromethane it is used in refrigerants R508A (61%) and R508B (54%).

Environmental effects

Due to the high energy of C-F bonds, it is very inert and thus acts as an extremely stable greenhouse gas, with an atmospheric lifetime of 10,000 years (other sources: 500 years)[2] and a global warming potential (GWP) of 9200. A calculated atmospheric lifetime range of 500 to 10,000 years has been reported.[3] Atmospheric concentration of tetrafluoroethane is 3 pptv (increase by 3 pptv since 1750[4]). However, it has a strong absorption potential in the infrared part of the spectrum. Radiative forcing is 0.001 W/m2. Its ozone depletion potential (ODP) is 0.

Hexafluoroethane is listed in IPCC list of greenhouse gases.

Main industrial emissions of hexafluoroethane besides tetrafluoromethane are produced during production of aluminium using Hall-Héroult process.

Health risks

Due to its high relative density, it gathers in low-lying areas, and at high concentrations it can cause asphyxiation. Other health effects are similar to tetrafluoromethane.

See also

References

External links

This article is issued from Wikipedia - version of the Tuesday, December 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.