Hierarchical control system

A hierarchical control system is a form of control system in which a set of devices and governing software is arranged in a hierarchical tree. When the links in the tree are implemented by a computer network, then that hierarchical control system is also a form of networked control system.

A hierarchical control system takes the shape of a tree in which each node operates independently, performing tasks from its superior node, commanding tasks of its subordinate nodes, sending abstracted sensations to its superior node, and receiving sensations from its subordinate nodes. Leaf nodes are sensors or actuators.

Overview

A human-built system with complex behavior is often organized as a hierarchy. For example, a command hierarchy has among its notable features the organizational chart of superiors, subordinates, and lines of organizational communication. Hierarchical control systems are organized similarly to divide the decision making responsibility.

Each element of the hierarchy is a linked node in the tree. Commands, tasks and goals to be achieved flow down the tree from superior nodes to subordinate nodes, whereas sensations and command results flow up the tree from subordinate to superior nodes. Nodes may also exchange messages with their siblings. The two distinguishing features of a hierarchical control system are related to its layers.[1]

Besides artificial systems, an animal's control systems are proposed to be organized as a hierarchy. In perceptual control theory, which postulates that an organism's behavior is a means of controlling its perceptions, the organism's control systems are suggested to be organized in a hierarchical pattern as their perceptions are constructed so.

Applications

Manufacturing, robotics and vehicles

Among the robotic paradigms is the hierarchical paradigm in which a robot operates in a top-down fashion, heavy on planning, especially motion planning. Computer-aided production engineering has been a research focus at NIST since the 1980s. Its Automated Manufacturing Research Facility was used to develop a five layer production control model. In the early 1990s DARPA sponsored research to develop distributed (i.e. networked) intelligent control systems for applications such as military command and control systems. NIST built on earlier research to develop its Real-Time Control System (RCS) and Real-time Control System Software which is a generic hierarchical control system that has been used to operate a manufacturing cell, a robot crane, and an automated vehicle.

In November 2007, DARPA held the Urban Challenge. The winning entry, Tartan Racing[2] employed a hierarchical control system, with layered mission planning, motion planning, behavior generation, perception, world modelling, and mechatronics.[3]

Artificial intelligence

Subsumption architecture is a methodology for developing artificial intelligence that is heavily associated with behavior based robotics. This architecture is a way of decomposing complicated intelligent behavior into many "simple" behavior modules, which are in turn organized into layers. Each layer implements a particular goal of the software agent (i.e. system as a whole), and higher layers are increasingly more abstract. Each layer's goal subsumes that of the underlying layers, e.g. the decision to move forward by the eat-food layer takes into account the decision of the lowest obstacle-avoidance layer. Behavior need not be planned by a superior layer, rather behaviors may be triggered by sensory inputs and so are only active under circumstances where they might be appropriate.[4]

Reinforcement learning has been used to acquire behavior in a hierarchical control system in which each node can learn to improve its behavior with experience.[5]

Constituents in a node from James Albus's Reference Model Architecture

James Albus, while at NIST, developed a theory for intelligent system design named the Reference Model Architecture (RMA),[6] which is a hierarchical control system inspired by RCS. Albus defines each node to contain these components.

At its lowest levels, the RMA can be implemented as a subsumption architecture, in which the world model is mapped directly to the controlled process or real world, avoiding the need for a mathematical abstraction, and in which time-constrained reactive planning can be implemented as a finite state machine. Higher levels of the RMA however, may have sophisticated mathematical world models and behavior implemented by automated planning and scheduling. Planning is required when certain behaviors cannot be triggered by current sensations, but rather by predicted or anticipated sensations, especially those that come about as result of the node's actions.[7]

References

  1. Findeisen, page 9
  2. Tartan Racing team description
  3. Urmson, C. et al., Tartan Racing: A Multi-Modal Approach to the DARPA Urban Challenge 2007, page 4
  4. Brooks, R. A. "Planning is just a way of avoiding figuring out what to do next", Technical report, MIT Artificial Intelligence Laboratory, 1987
  5. Takahashi, Y. , and Asada, M., Behavior Acquisition by Multi-Layered Reinforcement Learning. In Proceeding of the 1999 IEEE International Conference on Systems, Man, and Cybernetics, pages 716-721
  6. Albus, J. S. A Reference Model Architecture for Intelligent Systems Design. In Antsaklis, P.J., Passino, K.M. (Eds.) (1993) An Introduction to Intelligent and Autonomous Control. Kluwer Academic Publishers, 1993, Chapter 2, pp27-56. ISBN 0-7923-9267-1
  7. Meystel, A. M., Albus, J.S., Intelligent Systems, John Wiley and Sons, New York, 2002, pp 30-31

Further reading

External links

This article is issued from Wikipedia - version of the Friday, March 11, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.