Cumene process

The cumene process (cumene-phenol process, Hock process) is an industrial process for developing phenol and acetone from benzene and propylene. The term stems from cumene (isopropyl benzene), the intermediate material during the process. It was invented by Heinrich Hock in 1944[1][2] and independently by R. Ūdris and P. Sergeyev in 1942 (USSR).[3]

This process converts two relatively cheap starting materials, benzene and propylene, into two more valuable ones, phenol and acetone. Other reactants required are oxygen from air and small amounts of a radical initiator. Most of the worldwide production of phenol and acetone is now based on this method. In 2003, nearly 7 million tonnes of phenol was produced by the cumene process.[4] In order for this process to be economical, there must also be demand for the acetone by-product as well as the phenol.

Technical description

Benzene and propylene are compressed together to a pressure of 30 standard atmospheres at 250 °C (482 °F) in presence of a catalytic Lewis acid. Phosphoric acid is often favored over aluminium halides. Cumene is formed in the gas-phase Friedel-Crafts alkylation of benzene by propylene:

Cumene is oxidized in air which removes the tertiary benzylic hydrogen from cumene and hence forms a cumene radical:

This cumene radical then bonds with an oxygen molecule to give cumene peroxide radical, which in turn forms cumene hydroperoxide (C6H5C(CH3)2-O-O-H) by abstracting benzylic hydrogen from another cumene molecule. This latter cumene converts into cumene radical and feeds back into subsequent chain formations of cumene hydroperoxides. A pressure of 5 atm is used to ensure that the unstable peroxide is kept in liquid state.

Cumene hydroperoxide is then hydrolysed in an acidic medium (the Hock rearrangement) to give phenol and acetone. In the first step, the terminal hydroperoxy oxygen atom is protonated. This is followed by a step in which the phenyl group migrates from the benzyl carbon to the adjacent oxygen and a water molecule is lost, producing a resonance stabilized tertiary carbocation. The concerted mechanism of this step is similar to the mechanisms of the Baeyer-Villiger oxidation[5] and also the oxidation step of hydroboration-oxidation.[6] In 2009, an acidified bentonite clay was proven to be a more economical catalyst than sulfuric acid as the acid medium.

As shown below, the resulting carbocation is then attacked by water, a proton is then transferred from the hydroxy oxygen to the ether oxygen, and finally the ion falls apart into phenol and acetone.

The products are separated by distillation.

References

  1. Hock, H. and Lang, S. (1944), Autoxydation von Kohlenwasserstoffen, IX. Mitteil.: Über Peroxyde von Benzol-Derivaten. Berichte der deutschen chemischen Gesellschaft (A and B Series), 77: 257–264 doi:10.1002/cber.19440770321
  2. Concise Encyclopedia Chemistry (1993) Mary Eagleso
  3. http://izgudrojumi.lza.lv/izg_en.php?id=54
  4. Manfred Weber, Markus Weber, Michael Kleine-Boymann "Phenol" in Ullmann's Encyclopedia of Industrial Chemistry 2004, Wiley-VCH. doi:10.1002/14356007.a19_299.pub2.
  5. Streitwieser, A; Heathcock, C.H. (1992). "30". Introduction to Organic Chemistry. Kosower, E.M. (4th ed.). New York: MacMillan. p. 1018. ISBN 0-02-418170-6.
  6. K.P.C., Vollhardt; N.E. Schore (2003). "22". Organic Chemistry: Structure and Function (4th ed.). New York: Freeman. p. 988. ISBN 0-7167-4374-4.

See also

Wikimedia Commons has media related to Cumene process.
This article is issued from Wikipedia - version of the Saturday, December 12, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.