Hydromill trench cutter

The hydromill trench cutter is a type of construction equipment designed to dig the wells intended to be used in the casting of slurry walls. Typically, it's a cutter attachment mounted on a Crawler Crane base machine, with different types of hose handling systems. Usually, there are two sets of hoses, one for hydraulic oil, and another for extraction of slurry from the diaphragm wall.

Basic theory of a hydromill, is to crush the soil using two cutting wheels, while a powerful pump, will extract the crushed material alongside the slurry, typically Bentonite.

Machine Parts

The Hydromill, also known as Hydraulic Cutter, basically consists of:-

Base machine, usually a crawler crane, of adequate capacity.
Hose handling system, for both hydraulic and slurry hoses, these systems can vary between hose tension, or hose drum.
Hydraulic cutter, which typically consists of two cutting wheels, a slurry pump, and flaps to control its direction in case of deviation.

Cutter Dimensions

Hydraulic cutter have a standard length of 2800 mm, with various width, varying from 600 mm up to 2500 mm.

Cutting Wheels

Cutting wheels teeth depend mainly on the type of soil intended to be excavated.

External links

MTA hydromill trench cutter
Bauer Trench Cutter System

This article is issued from Wikipedia - version of the Monday, January 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.