Professional Graphics Controller

Professional Graphics Controller
Release date 1984 (1984)
Architecture Intel 8088
Cards
High-end IBM 5175 PGD
Matrox PG-640, PG-1280 and QG-640
Dell NEC MVA-1024
Everex EPGA
Orchid Technology TurboPGA
Vermont Microsystems IM-640
History
Predecessor Color Graphics Adapter
Successor VGA / 8514

Professional Graphics Controller (PGC, often called Professional Graphics Adapter and sometimes Professional Graphics Array) was a graphics card manufactured by IBM for PCs.[1] It consisted of three interconnected PCBs, and contained its own processor and memory. The PGC was, at the time of its release, the most advanced graphics card for the IBM XT and aimed for tasks such as CAD.[2]

Introduced in 1984,[3] the Professional Graphics Controller offered a maximum resolution of 640×480 with 256 colors at a refresh rate of 60 Hertz—a higher resolution and color depth than EGA and VGA supported. This mode is not BIOS-supported. It was intended for the computer-aided design market and included 320 kB of display RAM and an on-board Intel 8088 microprocessor. The 8088 was placed directly on the card to permit rapid updates of video memory. Other cards forced the PC's CPU to write to video memory through a slower ISA bus. While never widespread in consumer-class personal computers, its US $4,290 list price compared favorably to US$50,000 dedicated CAD workstations of the time. It was discontinued in 1987 with the arrival of VGA and 8514.

Software support

The board was targeted at the CAD market, therefore a limited software support is to be expected. Yet, the only software known to support the PGC are IBM's Graphical Kernel System, P-CAD 4.5, Canyon State Systems CompuShow[4][5] and AutoCAD 2.5.[6]

Output capabilities

PGC supports:

Operation

The display adapter was composed of three physical circuit boards (one with the on-board microprocessor, firmware ROMs and video output connector, one providing CGA emulation, and the third mostly carrying RAM) and occupied two adjacent expansion slots on the XT or AT motherboard;[7] the third card was located in between the two slots. The PGC could not be used in the original IBM PC without modification due to the different spacing of its slots.

In addition to its native 640 x 480 mode, the PGC optionally supported the documented text and graphics modes of the Color Graphics Adapter, which could be enabled using an onboard jumper. However, it was only partly register-compatible with CGA.

Related monitor

The PGC's matching display was the IBM 5175, an analog RGB monitor that is unique to it and not compatible with any other video card without modification. With hardware modification, the 5175 can be used with VGA, Macintosh, and various other analog RGB video sources.[8] Some surplus 5175s in VGA-converted form were still sold by catalog retailers such as COMB as late as the early 1990s .

Hardware clones

See also

References

  1. ↑ http://www.minuszerodegrees.net/oa/OA%20-%20IBM%20Professional%20Graphics%20Controller.pdf
  2. 1 2 3 4 "Professional Graphics Controller Notes". Seasip.info. 2010-08-11. Retrieved 2014-06-19.
  3. ↑ IBM. 5175 Professional Graphics Display and Controller Announcement Letter. 1984-09-10 ().
  4. ↑ http://www.seasip.info/VintagePC/pgc.html#software
  5. ↑ http://www.cshowplace.com/history.htm
  6. ↑ InfoWorld 29 Sep 1986, p. 49, at Google Books
  7. ↑ Professional Graphics Adapter pictures
  8. ↑ "Google Discussiegroepen". Groups.google.com. Retrieved 2014-06-19.
  9. ↑ "InfoWorld". Retrieved 2014-06-19.
  • Mueller, Scott (1992) Upgrading and Repairing PCs, Second Edition, Que Books, ISBN 0-88022-856-3 - which says 3 slots and "adapter"
  • A Professional Graphics Controller by K. A. Duke and W. A. Wall, IBM Systems Journal

External links

This article is issued from Wikipedia - version of the Thursday, February 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.