IBM Extended Density Format

The IBM eXtended Density Format (XDF) is a way of formatting standard high-density 3½-inch and 5¼-inch floppy disks to larger-than-standard capacities. It is supported natively by IBM's PC DOS versions 7 and 2000 and by OS/2 Warp 3 onward, using the XDF and XDFCOPY commands (directly in OS/2).

When formatted as XDF disks, 3½-inch floppies can hold 1860 KB, and 5¼-inch floppies can hold 1540 KB, using different number of sectors as well as different sector size per track (not all sectors in the same track are of the same size).

However, the first cylinder uses standard formatting, providing a small FAT12 section that can be accessed without XDF support and on which can be put a ReadMe file or the XDF drivers. Floppy distributions of OS/2 3.0, PC DOS 7 and onward used XDF formatting for most of the media set. Floppy disks formatted using XDF can only be read in floppy disk drives that are attached directly to the system by way of a FDC. Thus, USB attached floppy drives cannot read XDF formatted media.

See also

This article is issued from Wikipedia - version of the Thursday, March 05, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.