ID3

For other uses, see ID3 (disambiguation).

ID3 is a metadata container most often used in conjunction with the MP3 audio file format. It allows information such as the title, artist, album, track number, and other information about the file to be stored in the file itself.

ID3 is also specified by Apple as a timed metadata in HTTP Live Streaming, carried as a PID in the main transport stream or in separate audio TS.

There are two unrelated versions of ID3: ID3v1 and ID3v2. ID3v1 takes the form of a 128-byte segment at the end of an MP3 file containing a fixed set of data fields. ID3v1.1 is a slight modification which adds a "track number" field at the expense of a slight shortening of the "comment" field. ID3v2 is structurally very different from ID3v1, consisting of an extensible set of "frames" located at the start of the file, each with a frame identifier (a three- or four-byte string) and one piece of data. 83 types of frames are declared in the ID3v2.4 specification, and applications can also define their own types. There are standard frames for containing cover art, BPM, copyright and license, lyrics, and arbitrary text and URL data, as well as other things. Three versions of ID3v2 have been documented, each of which has extended the frame definitions.

ID3 is a de facto standard for metadata in MP3 files; no standardization body was involved in its creation nor has such an organization given it a formal approval status.[1] It competes with the APE tag in this arena.

ID3v1

The MP3 standard did not include a method for storing file metadata. In 1996 Eric Kemp had the idea to add a small chunk of data to the audio file, thus solving the problem. The method, now known as ID3v1, quickly became the de facto standard for storing metadata in MP3s.[2] The format was released by Damaged Cybernetics, an underground group that specialized in cracking console gaming systems. There was no identifying information for any of the cracked console ROMs, thus an ID tagging system was created to make tracking easier. Eric and associates carried this over into MP3 files. This format was used for a number of file formats unknown at that time.

The ID3v1 tag occupies 128 bytes, beginning with the string TAG 128 bytes from the end of the file. The tag was placed at the end of the file to maintain compatibility with older media players. Some players would play a small burst of static when they read the tag, but most ignored it, and almost all modern players will correctly skip it. This tag allows 30 bytes each for the title, artist, album, and a "comment", four bytes for the year, and a byte to identify the genre of the song from a predefined list of 80 values (Winamp later extended this list to 148 values).

One improvement to ID3v1 was made by Michael Mutschler in 1997. Since the comment field was too small to write anything useful, he decided to trim it by two bytes and use those two bytes to store the track number. Such tags are referred to as ID3v1.1.[2]

Layout

Strings are either space- or zero-padded. Unset string entries are filled using an empty string. ID3v1 is 128 bytes long.[3]

Field Length Description
header 3 "TAG"
title 30 30 characters of the title
artist 30 30 characters of the artist name
album 30 30 characters of the album name
year 4 A four-digit year
comment 28[4] or 30 The comment.
zero-byte[4] 1 If a track number is stored, this byte contains a binary 0.
track[4] 1 The number of the track on the album, or 0. Invalid, if previous byte is not a binary 0.
genre 1 Index in a list of genres, or 255

ID3v1 pre-defines a set of genres denoted by numerical codes. Winamp extended the list by adding more genres in its own music player, which were later adopted by others (though some are of dubious value: e.g. "Primus" is one specific band, not a genre, and "Negerpunk" appears to be a racist joke in Swedish). However, support for the extended Winamp list is not universal. In some cases, only the genres up to 125 are supported.[5][6]

Extended tag

The extended tag is an extra data block before an ID3v1 tag, which extends the title, artist and album fields to 60 bytes each, offers a freetext genre, a one-byte (values 0–5) speed and the start and stop time of the music in the MP3 file, e.g., for fading in. If none of the fields are used, it will be automatically omitted.

Some programs supporting ID3v1 tags can read the extended tag, but writing may leave stale values in the extended block. The extended block is not an official standard, and is only supported by few programs, not including XMMS or Winamp. The extended tag is sometimes referred to as the "enhanced" tag.

The extended tag is 227 bytes long, and placed before the ID3v1 tag.

Field Length Description
header 4 "TAG+"
title 60 60 characters of the title
artist 60 60 characters of the artist name
album 60 60 characters of the album name
speed 1 0=unset, 1=slow, 2= medium, 3=fast, 4=hardcore
genre 30 A free-text field for the genre
start-time 6 the start of the music as mmm:ss
end-time 6 the end of the music as mmm:ss

ID3v2

In 1998, a new specification called ID3v2 was created by multiple contributors.[7] Although it bears the name ID3, its structure is very different from ID3v1.

ID3v2 tags are of variable size, and usually occur at the start of the file, to aid streaming media. They consist of a number of frames, each of which contains a piece of metadata. For example, the TIT2 frame contains the title, and the WOAR frame contains the URL of the artist's website. Frames can be up to 16MB in length, while total tag size is limited to 256MB. The internationalization problem was solved by allowing the encoding of strings not only in ISO-8859-1, but also in Unicode.

Textual frames are marked with an encoding byte.[8]

$00 – ISO-8859-1 (LATIN-1, Identical to ASCII for values smaller than 0x80).
$01 – UCS-2 (UTF-16 encoded Unicode with BOM), in ID3v2.2 and ID3v2.3.
$02 – UTF-16BE encoded Unicode without BOM, in ID3v2.4.
$03 – UTF-8 encoded Unicode, in ID3v2.4.

However, mojibake is still common when using local encodings instead of Unicode. In particular, some Japanese editors are known to use Shift JIS encoding, which usually has disastrous effects: it will not work with any standard-compliant software regardless of local settings (since it is not supported by the standard), will not work outside Japan (since Shift JIS has very little support outside Japan), and will not even work on all Japanese computers even with a specifically non-compliant reader (as it is software-dependent and settings-dependent).

There are 83 types of frames declared in the ID3v2.4 specification,[9] and applications can also define their own types. There are standard frames for containing cover art, BPM, copyright and license, lyrics, and arbitrary text and URL data, as well as other things. There are three versions of ID3v2:

Windows Explorer and Windows Media Player cannot handle ID3v2.4 tags in any version, up to and including Windows 10 / WMP 12. Windows can understand ID3v2 up to and including version 2.3.[13][14]

ID3v2 rating tag issue

There is a loose de facto standard for implementation of song ratings. Most apps will display 0 to 5 stars for any given song, and how the stars are expressed can vary. For instance, when rating a song in iTunes, the rating is not embedded in the tag in the music file, but is instead stored in a separate database that contains all of the iTunes metadata. Other media players can embed rating tags in music files but some software creates its own tag frame or method. As a result, a song which is rated on one media player sometimes won't display the rating when played on other software or mobile device.

However, there is a "Popularimeter" frame in the ID3v2 specification meant for this purpose. The frame is called POPM and Windows Explorer, Windows Media Player, Winamp, foobar2000, MediaMonkey, and other software all map roughly the same ranges of 0–255 to a 0–5 stars value for display.

The following list details how Windows Explorer reads and writes the POPM frame:

Windows Explorer uses the following syntax:

Windows Media Player 9 Series | 255 | 0

The 0 is the play counter portion of POPM as per the ID3v2 POPM specification, which is not to be confused or conflated with the PCNT frame, which is a separate frame meant entirely for playcounts. If an app supports granularity however, it should write 1 for one full star, and then 2–31 would be granular points under one full star. Notably, the ID string Windows uses is not an email address, as called for in the specifications. Further, Windows Explorer and Windows Media Player up to and including Windows 7 and WMP 12 (possibly beyond) contain a bug such that, if one were to use them to rate files, any Replay Gain tags one would have will be corrupted. WMP also writes the same values as described above, and reads the same way as well, EXCEPT for the cutoff between 4 and 5 stars, which is slightly different and basically of no consequence. WMP uses 221/222 instead, for reasons that are not clear.

ID3v2 chapters

The ID3v2 Chapter Addendum was published in December 2005 but is not widely supported as yet. It allows users to jump easily to specific locations or chapters within an audio file and can provide a synchronized slide show of images and titles during playback. Typical applications include Enhanced podcasts and it can be used in ID3v2.3 or ID3v2.4 tags.[15]

ID3v2 embedded image extension

The metadata can also contain images of the following types:[16]

$00     Other
$01     32x32 pixels 'file icon' (PNG only)
$02     Other file icon
$03     Cover (front)
$04     Cover (back)
$05     Leaflet page
$06     Media (e.g. label side of CD)
$07     Lead artist/lead performer/soloist
$08     Artist/performer
$09     Conductor
$0A     Band/Orchestra
$0B     Composer
$0C     Lyricist/text writer
$0D     Recording Location
$0E     During recording
$0F     During performance
$10     Movie/video screen capture
$11     A bright coloured fish
$12     Illustration
$13     Band/artist logotype
$14     Publisher/Studio logotype

ID3v2 frame specification (Version 2.3)

Frame Description Notes
AENC Audio encryption
APIC Attached picture
COMM Comments
COMR Commercial frame
ENCR Encryption method registration
EQUA Equalization replaced by EQU2 in v2.4
ETCO Event timing codes
GEOB General encapsulated object
GRID Group identification registration
IPLS Involved people list replaced by TMCL and TIPL in v2.4
LINK Linked information
MCDI Music CD identifier
MLLT MPEG location lookup table
OWNE Ownership frame
PRIV Private frame
PCNT Play counter
POPM Popularimeter
POSS Position synchronisation frame
RBUF Recommended buffer size
RVAD Relative volume adjustment replaced by RVA2 in v2.4
RVRB Reverb
SYLT Synchronized lyric/text
SYTC Synchronized tempo codes
TALB Album/Movie/Show title
TBPM Beats per minute (BPM)
TCOM Composer
TCON Content type
TCOP Copyright message
TDAT Date replaced by TDRC in v2.4
TDLY Playlist delay
TENC Encoded by
TEXT Lyricist/Text writer
TFLT File type
TIME Time replaced by TDRC in v2.4
TIT1 Content group description
TIT2 Title/songname/content description
TIT3 Subtitle/Description refinement
TKEY Initial key
TLAN Language(s)
TLEN Length
TMED Media type
TOAL Original album/movie/show title
TOFN Original filename
TOLY Original lyricist(s)/text writer(s)
TOPE Original artist(s)/performer(s)
TORY Original release year replaced by TDOR in v2.4
TOWN File owner/licensee
TPE1 Lead performer(s)/Soloist(s)
TPE2 Band/orchestra/accompaniment
TPE3 Conductor/performer refinement
TPE4 Interpreted, remixed, or otherwise modified by
TPOS Part of a set
TPUB Publisher
TRCK Track number/Position in set
TRDA Recording dates replaced by TDRC in v2.4
TRSN Internet radio station name
TRSO Internet radio station owner
TSIZ Size deprecated in v2.4
TSRC International Standard Recording Code (ISRC)
TSSE Software/Hardware and settings used for encoding
TYER Year replaced by TDRC in v2.4
TXXX User defined text information frame
UFID Unique file identifier
USER Terms of use
USLT Unsynchronized lyric/text transcription
WCOM Commercial information
WCOP Copyright/Legal information
WOAF Official audio file webpage
WOAR Official artist/performer webpage
WOAS Official audio source webpage
WORS Official internet radio station homepage
WPAY Payment
WPUB Publishers official webpage
WXXX User defined URL link frame

The version 2.3 of the standard prescribes that some fields can contain multiple values separated by the "/" character . The fields that can contain multiple values are:

 TPE1 TCOM TEXT TOLY TOPE

ID3v2 frame specification (Version 2.4 – delta respect to 2.3)

Frame Description Notes
ASPI Audio seek point index
EQU2 Equalisation Replaces the EQUA frame
RVA2 Relative volume adjustment Replaces the RVAD frame
SEEK Seek frame
SIGN Signature frame
TDEN Encoding time
TDOR Original release time Replaces the TORY frame
TDRC Recording time Replaces four of the v2.3 frames: TDAT, TIME, TRDA, TYER
TDRL Release time
TDTG Tagging time
TIPL Involved people list In combination, provide a replacement for the IPLS frame
TMCL Musician credits list
TMOO Mood
TPRO Produced notice
TSOA Album sort order
TSOP Performer sort order
TSOT Title sort order
TSST Set subtitle

In addition to the above-mentioned eight frames that were replaced, the TSIZ frame was fully deprecated in the ID3v2.4 specification.

Version 2.4 of the specification prescribes that the text fields (all the fields starting with a T except TXXX) can contain multiple values separated by a null character. The null character is the one represented by the termination code for the character encoding used.

Editing ID3 tags

See also: Tag editor

ID3 tags may be edited in a variety of ways. On some platforms the file's properties may be edited by viewing extended information in the file manager. Additionally most audio players allow editing single or groups of files. Editing groups of files is often referred to as "batch tagging". There are also specialized applications, called taggers, which concentrate specifically on editing the tags and related tasks. Some, such as puddletag offer advanced features such as advanced batch tagging or editing based on regular expressions.

Non-MP3-implementation and alternatives

ID3 tags were designed with MP3 in mind, so they would work without problems with MP3 and MP3Pro files. However, the tagsets are an independent part of the MP3 file and should be usable elsewhere. In practice, the only other formats which widely uses ID3v2 tags are AIFF and WAV. In AIFF the tag is stored inside an IFF chunk named "ID3". Windows media ASF files (WMA, WMV) have their own tagging formats but also support ID3 Tags embedded as attributes.[17]

MP4 also allows the embedding of an ID3 tag,[18] and this is widely supported, especially in Apple's iTunes, which uses MP4 standards in its audio and video file formats. Apple also uses ID3 tags to provide a Parental Advisory or Clean Version (radio edit) rating for audio tracks or music videos bought on the iTunes Store. Other container-based formats use their own tagging formats. An example of this is Ogg, which uses Vorbis comments. Adding ID3 tags to these would break the container structure. Earlier versions of Winamp such as 2.xx have been proven able to add ID3v1 and ID3v2 tags to MP1 and MP2 files.

See also

References

  1. ↑ ID3 History page
  2. 1 2 Practical Common Lisp, p. 335.
  3. ↑ For an implementation of ID3v1 in Python, see Dive Into Python, Chapter 5. Objects and Object-Orientation
  4. 1 2 3 The track number is stored in the last two bytes of the comment field. If the comment is 29 or 30 characters long, no track number can be stored.
  5. ↑ ID3 Tag Genre ID List
  6. ↑ "ID3 Genre List".
  7. ↑ ID3v2 Contributors
  8. ↑ id3v2-00 - ID3.org
  9. ↑ "ID3v2.4.0 Native Frames". Retrieved 2012-12-27.
  10. ↑ Nilsson, Martin. "ID3 Developer Information". ID3.org. Retrieved 9 April 2011.
  11. ↑ "ID3 tag version 2.3.0".
  12. ↑ "ID3 tag version 2.4.0 - Native Frames".
  13. ↑ Bright, Peter (28 October 2012). "Music and Video in Windows 8: a work in progress". arstechnica.com. Retrieved 2012-10-29.
  14. ↑ "Microsoft support community". 11 January 2011.
  15. ↑ Newell, C. (2 December 2005). "ID3v2 Chapter Frame Addendum". ID3.org. Retrieved 2008-02-06.
  16. ↑ ID3 Tag Version 2.3.0
  17. ↑ "Windows Media Developer Center: ID3 Tag Support". Microsoft Developer Network. Microsoft. Retrieved 2010-03-24.
  18. ↑ The 'MP4' Registration Authority

External links

This article is issued from Wikipedia - version of the Friday, April 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.