Identification friend or foe

An IFF test set used for testing transponders on aircraft
Model XAE IFF kit, the first radio recognition IFF system in the U.S.

Identification, friend or foe (IFF) is an identification system designed for command and control. It enables military and national (civilian air traffic control) interrogation systems to identify aircraft, vehicles or forces as friendly and to determine their bearing and range from the interrogator. IFF may be used by both military and civilian aircraft.

IFF was first developed during the Second World War, with the arrival of radar, and early friendly fire incidents.

The term IFF is a misnomer, as IFF can only positively identify friendly targets, not hostile ones.[1][2][3][4] If an IFF interrogation receives no reply or an invalid reply, the object cannot be identified as friendly, but is not positively identified as foe. There are in addition many reasons that friendly aircraft may not properly reply to IFF.

IFF is a tool within the broader military action of Combat Identification (CID), "the process of attaining an accurate characterization of detected objects in the operational environment sufficient to support an engagement decision." The broadest characterization is that of friend, enemy, neutral, or unknown. CID not only can reduce friendly fire incidents, but also contributes to overall tactical decision-making.[5]

History

With the successful deployment of radar systems for air defence during World War II, the combatants were immediately confronted with difficulty in distinguishing friendly aircraft from hostile ones; by that time, aircraft were flown at high speed and altitude, making visual identification impossible, and the targets showed up as featureless blips on the radar screen. This led to incidents such as the "battle of Barking Creek", over Britain,[6][7][8] and the "air attack on the fortress of Koepenick", over Germany.[9][10]

Britain

Radar coverage of the Chain Home system by 1939

Already before the deployment of their radar system, the RAF had implemented a tracking system for directing their own forces; aircraft were tracked by triangulating their position from fixed positions, using intermittent "pip-squeak" signals from each aircraft.[11] This system was used during the Battle of Britain to track 'friendly' formations. It used the standard HF radio fit of RAF fighters, plus a control box that essentially contained a timer, so that a pre-arranged signal was 'squawked' at given intervals - to be picked up by the HF/DF tracking stations.

With the introduction of radar, researchers endeavoured to integrate a working IFF system with the radar system. Initial patents for both passive and active radar IFF were filed in the UK by Robert Watson-Watt in 1935 and 1936 respectively. By 1938, researchers at Bawdsey Manor had come up with 'reflectors' mounted on the aircraft designed to reflect the Chain Home wave frequencies - giving friendly forces a distinctive profile on the radar screens. The design, however, proved impractical, as other difficult-to-control factors, including the angle of the incident radar beam with the plane's flight-path, influenced the magnitude of the reflected signal making a consistent friend or foe designation hard to achieve.[12]

The first active IFF transponder (transmitter responder) was the 'IFF Mark I' and was put into operation in 1939. On receipt of an interrogation from the Chain Home radar system (20-30 MHz), consisting of a radar distinctive 'peaked' pulse tuned to a specific frequency, the unit would respond with a signal of steadily increasing amplitude, allowing the radar operators to identify it as friendly.

Flaws in the Mark I version, including the need to constantly adjust it during flight, were rectified somewhat with the Mark II sets; these could also be interrogated by alternate frequency band transmissions, including those from mobile sets in use with the navy and army.[13]

In 1940, English engineer Frederic Calland Williams began work on the Mark III system at the Telecommunications Research Establishment, which was to become the standard for the Western Allies for most of the war. Mark III transponders were designed to respond to specific 'interrogators', rather than replying directly to received radar signals. The system also allowed limited communication to be made, including the ability to transmit a coded 'Mayday' response. The IFF sets were designed and built by Ferranti in Manchester to Williams' specifications. Equivalent sets were manufactured in the US, initially as copies of British sets, so that allied aircraft would be identified upon interrogation by each other's radar.

Germany

Code generator from German WW II IFF-Radio FuG 25a Erstling

FuG 25a "Erstling" (English: "Debut") was developed in Germany in 1940. It received the radar frequencies on the low-VHF band at 125 MHz (Freya radar) and the low-UHF-banded 550–580 MHz (Würzburg radar). To start the identification procedure, the ground operator switched the pulse frequency of his radar from 3,750 Hz to 5,000 Hz.

The airborne receiver decoded that and started to transmit its code. Before departure, two mechanical keys of ten bits each were inserted into the shown reader. The IFF transmitter worked on 168 MHz with a power of 400 watts (PEP). Unfortunately for the Germans, British military scientists designed and built their own IFF transmitter called "Perfectos", which was designed to trigger a response from any FuG 25a system in the vicinity. When mounted in an RAF Mosquito, the "Perfectos" device revealed the position of any German nightfighters fitted with an FuG 25a. As a result, the British "Perfectos" device severely compromised German use of the FuG 25a.

Further wartime developments

The IFF of World War II and Soviet military systems (1946 to 1991) used coded radar signals (called Cross-Band Interrogation, or CBI) to automatically trigger the aircraft's transponder in an aircraft illuminated by the radar. Radar-based aircraft identification is also called secondary radar in both military and civil usage, with primary radar bouncing an RF pulse off of the aircraft to determine position. George Charrier, working for RCA, filed for a patent for such an IFF device in 1941. It required the operator to perform several adjustments to the radar receiver to suppress the image of the natural echo on the radar receiver, so that visually examine the IFF signal.[14]

By 1943, Donald Barchok filed a patent for a radar system using the acronym IFF in his text with only parenthetic explanation, indicating that this acronym had become an accepted term.[15] In 1945, Emile Labin and Edwin Turner filed patents for radar IFF systems where the outgoing radar signal and the transponder's reply signal could each be independently programmed with a binary codes by setting arrays of toggle switches; this allowed the IFF code to be varied from day to day or even hour to hour.[16][17]

Early 21st century systems

NATO

The United States and other NATO countries started using a system called Mark XII in the late twentieth century; Britain had not until then implemented an IFF system compatible with that standard, but then developed a program for a compatible system known as successor IFF (SIFF).[18]

Modes

Notes

Modes 4 and 5 are designated for use by NATO forces.

See also

References

  1. ↑ "Combat Identification IFF Systems" (PDF). Tellumat. Retrieved 31 May 2015.
  2. ↑ "MEADS System Gains Full Certification for Identifying Friend or Foe Aircraft". Lockheed Martin. Retrieved 31 May 2015.
  3. ↑ "Identification Friend or Foe". Global Security. Retrieved 31 May 2015.
  4. ↑ "Combat Identification (IFF)". BAE Systems. Retrieved 31 May 2015.
  5. ↑ "Joint Publication (JP) 3-09, Joint Fire Support" (PDF). US DoD. 30 June 2010. p. III-20. Retrieved 27 December 2013.
  6. ↑ Christopher Yeoman & John Freeborn, Tiger Cub – The Story of John Freeborn DFC* A 74 Squadron Fighter Pilot In WWII, Pen and Sword Aviation, 2009, ISBN 978-1-84884-023-2, p45
  7. ↑ Bob Cossey, A Tiger's Tale: The Story of Battle of Britain Fighter Ace Wg. Cdr. John Connell Freeborn, ISBN 978-1-900511-64-3, chapter 4
  8. ↑ Hough, Richard and Denis Richards. The Battle of Britain: The Greatest Air Battle of World War II, WW Norton, 1990, p.67
  9. ↑ Galland, Adolf : The First and the Last p 101(1954 reprinted ..) ISBN 978 80 87888 92 6
  10. ↑ Price, Alfred : Battle Over the Reich pp95-6(1973) ISBN 0 7110 0481 1
  11. ↑ "The British invention of radar". Retrieved 2012-12-17.
  12. ↑ "General IFF principles". United States Fleet. 1945. Retrieved 2012-12-17.
  13. ↑ Lord Bowden (1985). "The story of IFF (identification friend or foe)". Physical Science, Measurement and Instrumentation, Management and Education - Reviews, IEE Proceedings A 132 (6). Retrieved 13 July 2014.
  14. ↑ George M. Charrier, Recognition System for Pulse Echo Radio Locators, U.S. Patent 2,453,970, granted Nov. 16, 1948.
  15. ↑ Donald Barchok, Means for Synchronizing Detection and Interrogation Systems, U.S. Patent 2,515,178, granted July 18, 1950.
  16. ↑ Emile Labin, Magnetostrictive Time-Delay Device, U.S. Patent 2,495,740, granted Jan. 31, 1950.
  17. ↑ Edwin E. Turner, Coded Impulse Responsive Secret Signalling System, U.S. Patent 2,648,060, granted Aug. 4, 1953.
  18. ↑
  19. 1 2 3 4 5 NATO STANAG 4193

External links

This article is issued from Wikipedia - version of the Wednesday, March 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.