Impact crater

Impact craters in the Solar System:

Top-left: 500-kilometer large crater Engelier on Saturn's moon Iapetus
Top-right: Recently formed impact crater on Mars showing a pristine ray system of ejecta^[1]
Bottom-left: 50,000-year-old Meteor Crater east of Flagstaff, Arizona, U.S.
Bottom-right: The prominent crater Tycho in the southern highlands of the Moon

An impact crater is an approximately circular depression in the surface of a planet, moon, or other solid body in the Solar System or elsewhere, formed by the hypervelocity impact of a smaller body with the surface. In contrast to volcanic craters, which result from explosion or internal collapse,^[2] impact craters typically have raised rims and floors that are lower in elevation than the surrounding terrain.^[3] Impact craters range from small, simple, bowl-shaped depressions to large, complex, multi-ringed impact basins. Meteor Crater is perhaps the best-known example of a small impact crater on Earth.

Impact craters are the dominant geographic features on many solid Solar System objects including the Moon, Mercury, Callisto, Ganymede and most small moons and asteroids. On other planets and moons that experience more active surface geological processes, such as Earth, Venus, Mars, Europa, Io and Titan, visible impact craters are less common because they become eroded, buried or transformed by tectonics over time. Where such processes have destroyed most of the original crater topography, the terms impact structure or astrobleme are more commonly used. In early literature, before the significance of impact cratering was widely recognised, the terms cryptoexplosion or cryptovolcanic structure were often used to describe what are now recognised as impact-related features on Earth.^[4]

The cratering records of very old surfaces, such as Mercury, the Moon, and the southern highlands of Mars, record a period of intense early bombardment in the inner Solar System around 3.9 billion years ago. The rate of crater production on Earth has since been considerably lower, but it is appreciable nonetheless; Earth experiences from one to three impacts large enough to produce a 20 km diameter crater about once every million years on average.^[5]^[6] This indicates that there should be far more relatively young craters on the planet than have been discovered so far. The cratering rate in the inner solar system fluctuates as a consequence of collisions in the asteroid belt that create a family of fragments that are often sent cascading into the inner solar system.^[7] Formed in a collision 160 million years ago, the Baptistina family of asteroids is thought to have caused a large spike in the impact rate, perhaps causing the Chicxulub impact that may have triggered the extinction of the non-avian dinosaurs 66 million years ago.^[7] Note that the rate of impact cratering in the outer Solar System could be different from the inner Solar System.^[8]

Although Earth's active surface processes quickly destroy the impact record, about 170 terrestrial impact craters have been identified.^[9] These range in diameter from a few tens of meters up to about 300 km, and they range in age from recent times (e.g. the Sikhote-Alin craters in Russia whose creation were witnessed in 1947) to more than two billion years, though most are less than 500 million years old because geological processes tend to obliterate older craters. They are also selectively found in the stable interior regions of continents.^[10] Few undersea craters have been discovered because of the difficulty of surveying the sea floor, the rapid rate of change of the ocean bottom, and the subduction of the ocean floor into Earth's interior by processes of plate tectonics.

Impact craters are not to be confused with landforms that may appear similar, including calderas, sinkholes, glacial cirques, ring dikes, salt domes, and others.

History

Daniel Barringer (1860–1929) was one of the first to identify an impact crater, Meteor Crater in Arizona; to crater specialists the site is referred to as Barringer Crater in his honor. Initially Barringer's ideas were not widely accepted, and even when the origin of Meteor Crater was finally acknowledged, the wider implications for impact cratering as a significant geological process on Earth were not.

Eugene Shoemaker, pioneer impact crater researcher, here at a crystallographic microscope used to examine meteorites

In the 1920s, the American geologist Walter H. Bucher studied a number of sites now recognized as impact craters in the USA. He concluded they had been created by some great explosive event, but believed that this force was probably volcanic in origin. However, in 1936, the geologists John D. Boon and Claude C. Albritton Jr. revisited Bucher's studies and concluded that the craters that he studied were probably formed by impacts.

The concept of impact cratering remained more or less speculative until the 1960s. At this time a number of researchers, most notably Eugene M. Shoemaker, (co-discoverer of the comet Shoemaker-Levy 9), conducted detailed studies of a number of craters and recognized clear evidence that they had been created by impacts, specifically identifying the shock-metamorphic effects uniquely associated with impact events, of which the most familiar is shocked quartz.

Armed with the knowledge of shock-metamorphic features, Carlyle S. Beals and colleagues at the Dominion Observatory in Victoria, British Columbia, Canada and Wolf von Engelhardt of the University of Tübingen in Germany began a methodical search for impact craters. By 1970, they had tentatively identified more than 50. Although their work was controversial, the American Apollo Moon landings, which were in progress at the time, provided supportive evidence by recognizing the rate of impact cratering on the Moon.^[11] Processes of erosion on the Moon are minimal and so craters persist almost indefinitely. Since the Earth could be expected to have roughly the same cratering rate as the Moon, it became clear that the Earth had suffered far more impacts than could be seen by counting evident craters.

Crater formation

A laboratory simulation of an impact event and crater formation

Impact cratering involves high velocity collisions between solid objects, typically much greater than the velocity of sound in those objects. Such hyper-velocity impacts produce physical effects such as melting and vaporization that do not occur in familiar sub-sonic collisions. On Earth, ignoring the slowing effects of travel through the atmosphere, the lowest impact velocity with an object from space is equal to the gravitational escape velocity of about 11 km/s. The fastest impacts occur at about 72 km/s^[12] in the "worst case" scenario which an object in a retrograde near-parabolic orbit hits Earth. (Because kinetic energy scales as velocity squared, Earth's gravity only contributes 1 km/s to this figure, not 11 km/s). The median impact velocity on Earth is about 20 km/s.^[13]

However, the slowing effects of travel through the atmosphere will rapidly decelerate any potential impactor, especially in the lowest 12 kilometres where 90% of the earth’s atmospheric mass lies. Meteorites of up to 7,000 kg will lose all their cosmic velocity due to atmospheric drag at a certain altitude (retardation point) and start to accelerate again due to Earth's gravity until the body reaches its terminal velocity of 0.09 to 0.16 km/s.^[12] The larger the meteoroid (i.e. asteroids and comets) the more of its initial cosmic velocity it will preserve. While an object of 9,000 kg maintains about 6% of its original velocity, one of 900,000 kg already preserves about 70%. Extremely large bodies (about 100,000 tonnes) will not be slowed down by the atmosphere at all and impact with their initial cosmic velocity if no prior disintegration occurs.^[12]

Impacts at these high speeds produce shock waves in solid materials, and both impactor and the material impacted are rapidly compressed to high density. Following initial compression, the high-density, over-compressed region rapidly depressurizes, exploding violently, to set in train the sequence of events that produces the impact crater. Impact-crater formation is therefore more closely analogous to cratering by high explosives than by mechanical displacement. Indeed, the energy density of some material involved in the formation of impact craters is many times higher than that generated by high explosives. Since craters are caused by explosions, they are nearly always circular – only very low-angle impacts cause significantly elliptical craters.^[14]

This describes impacts on solid surfaces. Impacts on porous surfaces, such as that of Hyperion, may produce internal compression without ejecta, punching a hole in the surface without filling in nearby craters. This may explain the 'sponge-like' appearance of that moon.^[15]

It is convenient to divide the impact process conceptually into three distinct stages: (1) initial contact and compression, (2) excavation, (3) modification and collapse. In practice, there is overlap between the three processes with, for example, the excavation of the crater continuing in some regions while modification and collapse is already underway in others.

Contact and compression

Nested Craters on Mars, 40.104° N, 125.005° E. These nested craters are probably caused by changes in the strength of the target material. This usually happens when a weaker material overlies a stronger material.^[16]

In the absence of atmosphere, the impact process begins when the impactor first touches the target surface. This contact accelerates the target and decelerates the impactor. Because the impactor is moving so rapidly, the rear of the object moves a significant distance during the short-but-finite time taken for the deceleration to propagate across the impactor. As a result, the impactor is compressed, its density rises, and the pressure within it increases dramatically. Peak pressures in large impacts exceed 1 T Pa to reach values more usually found deep in the interiors of planets, or generated artificially in nuclear explosions.

In physical terms, a shock wave initiates from the point of contact. As this shock wave expands, it decelerates and compresses the impactor, and it accelerates and compresses the target. Stress levels within the shock wave far exceed the strength of solid materials; consequently, both the impactor and the target close to the impact site are irreversibly damaged. Many crystalline minerals can be transformed into higher-density phases by shock waves; for example, the common mineral quartz can be transformed into the higher-pressure forms coesite and stishovite. Many other shock-related changes take place within both impactor and target as the shock wave passes through, and some of these changes can be used as diagnostic tools to determine whether particular geological features were produced by impact cratering.^[14]

As the shock wave decays, the shocked region decompresses towards more usual pressures and densities. The damage produced by the shock wave raises the temperature of the material. In all but the smallest impacts this increase in temperature is sufficient to melt the impactor, and in larger impacts to vaporize most of it and to melt large volumes of the target. As well as being heated, the target near the impact is accelerated by the shock wave, and it continues moving away from the impact behind the decaying shock wave.^[14]

Excavation

Contact, compression, decompression, and the passage of the shock wave all occur within a few tenths of a second for a large impact. The subsequent excavation of the crater occurs more slowly, and during this stage the flow of material is largely sub-sonic. During excavation, the crater grows as the accelerated target material moves away from the impact point. The target's motion is initially downwards and outwards, but it becomes outwards and upwards. The flow initially produces an approximately hemispherical cavity. The cavity continues to grow, eventually producing a paraboloid (bowl-shaped) crater in which the centre has been pushed down, a significant volume of material has been ejected, and a topographically elevated crater rim has been pushed up. When this cavity has reached its maximum size, it is called the transient cavity.^[14]

Herschel Crater on Saturn's moon Mimas

The depth of the transient cavity is typically a quarter to a third of its diameter. Ejecta thrown out of the crater do not include material excavated from the full depth of the transient cavity; typically the depth of maximum excavation is only about a third of the total depth. As a result, about one third of the volume of the transient crater is formed by the ejection of material, and the remaining two thirds is formed by the displacement of material downwards, outwards and upwards, to form the elevated rim. For impacts into highly porous materials, a significant crater volume may also be formed by the permanent compaction of the pore space. Such compaction craters may be important on many asteroids, comets and small moons.

In large impacts, as well as material displaced and ejected to form the crater, significant volumes of target material may be melted and vaporized together with the original impactor. Some of this impact melt rock may be ejected, but most of it remains within the transient crater, initially forming a layer of impact melt coating the interior of the transient cavity. In contrast, the hot dense vaporized material expands rapidly out of the growing cavity, carrying some solid and molten material within it as it does so. As this hot vapor cloud expands, it rises and cools much like the archetypal mushroom cloud generated by large nuclear explosions. In large impacts, the expanding vapor cloud may rise to many times the scale height of the atmosphere, effectively expanding into free space.

Most material ejected from the crater is deposited within a few crater radii, but a small fraction may travel large distances at high velocity, and in large impacts it may exceed escape velocity and leave the impacted planet or moon entirely. The majority of the fastest material is ejected from close to the center of impact, and the slowest material is ejected close to the rim at low velocities to form an overturned coherent flap of ejecta immediately outside the rim. As ejecta escapes from the growing crater, it forms an expanding curtain in the shape of an inverted cone; the trajectory of individual particles within the curtain is thought to be largely ballistic.

Small volumes of un-melted and relatively un-shocked material may be spalled at very high relative velocities from the surface of the target and from the rear of the impactor. Spalling provides a potential mechanism whereby material may be ejected into inter-planetary space largely undamaged, and whereby small volumes of the impactor may be preserved undamaged even in large impacts. Small volumes of high-speed material may also be generated early in the impact by jetting. This occurs when two surfaces converge rapidly and obliquely at a small angle, and high-temperature highly shocked material is expelled from the convergence zone with velocities that may be several times larger than the impact velocity.

Modification and collapse

Weathering may change the aspect of a crater drastically. This mound on Mars' north pole may be the result of an impact crater that was buried by sediment and subsequently re-exposed by erosion.

In most circumstances, the transient cavity is not stable: it collapses under gravity. In small craters, less than about 4 km diameter on Earth, there is some limited collapse of the crater rim coupled with debris sliding down the crater walls and drainage of impact melts into the deeper cavity. The resultant structure is called a simple crater, and it remains bowl-shaped and superficially similar to the transient crater. In simple craters, the original excavation cavity is overlain by a lens of collapse breccia, ejecta and melt rock, and a portion of the central crater floor may sometimes be flat.

Multi-ringed impact basin Valhalla on Jupiter's moon Callisto

Above a certain threshold size, which varies with planetary gravity, the collapse and modification of the transient cavity is much more extensive, and the resulting structure is called a complex crater. The collapse of the transient cavity is driven by gravity, and involves both the uplift of the central region and the inward collapse of the rim. The central uplift is not the result of elastic rebound, which is a process in which a material with elastic strength attempts to return to its original geometry; rather the collapse is a process in which a material with little or no strength attempts to return to a state of gravitational equilibrium.

Complex craters have uplifted centers, and they have typically broad flat shallow crater floors, and terraced walls. At the largest sizes, one or more exterior or interior rings may appear, and the structure may be labeled an impact basin rather than an impact crater. Complex-crater morphology on rocky planets appears to follow a regular sequence with increasing size: small complex craters with a central topographic peak are called central peak craters, for example Tycho; intermediate-sized craters, in which the central peak is replaced by a ring of peaks, are called peak-ring craters, for example Schrödinger; and the largest craters contain multiple concentric topographic rings, and are called multi-ringed basins, for example Orientale. On icy as opposed to rocky bodies, other morphological forms appear which may have central pits rather than central peaks, and at the largest sizes may contain very many concentric rings – Valhalla on Callisto is the type example of the latter.

Identifying impact craters

Impact structure of craters: simple and complex craters

Wells Creek crater in Tennessee, USA: a close-up of shatter cones developed in fine grained dolomite

Decorah crater: aerial electromagnetic resistivity map (USGS)

Meteor Crater in the U.S. state of Arizona, was the world's first confirmed impact crater.

Shoemaker Crater in Western Australia was renamed in memory of Gene Shoemaker.

Some volcanic features can resemble impact craters, and brecciated rocks are associated with other geological formations besides impact craters. Non-explosive volcanic craters can usually be distinguished from impact craters by their irregular shape and the association of volcanic flows and other volcanic materials. Impact craters produce melted rocks as well, but usually in smaller volumes with different characteristics.

The distinctive mark of an impact crater is the presence of rock that has undergone shock-metamorphic effects, such as shatter cones, melted rocks, and crystal deformations. The problem is that these materials tend to be deeply buried, at least for simple craters. They tend to be revealed in the uplifted center of a complex crater, however.

Impacts produce distinctive shock-metamorphic effects that allow impact sites to be distinctively identified. Such shock-metamorphic effects can include:

A layer of shattered or "brecciated" rock under the floor of the crater. This layer is called a "breccia lens".
Shatter cones, which are chevron-shaped impressions in rocks. Such cones are formed most easily in fine-grained rocks.
High-temperature rock types, including laminated and welded blocks of sand, spherulites and tektites, or glassy spatters of molten rock. The impact origin of tektites has been questioned by some researchers; they have observed some volcanic features in tektites not found in impactites. Tektites are also drier (contain less water) than typical impactites. While rocks melted by the impact resemble volcanic rocks, they incorporate unmelted fragments of bedrock, form unusually large and unbroken fields, and have a much more mixed chemical composition than volcanic materials spewed up from within the Earth. They also may have relatively large amounts of trace elements that are associated with meteorites, such as nickel, platinum, iridium, and cobalt. Note: scientific literature has reported that some "shock" features, such as small shatter cones, which are often associated only with impact events, have been found also in terrestrial volcanic ejecta.
Microscopic pressure deformations of minerals. These include fracture patterns in crystals of quartz and feldspar, and formation of high-pressure materials such as diamond, derived from graphite and other carbon compounds, or stishovite and coesite, varieties of shocked quartz.
Buried craters, such as the Decorah crater, can be identified through drill coring, aerial electromagnetic resistivity imaging, and airborne gravity gradiometry.^[17]

Lists of craters

Impact craters on Earth

Main article: List of impact craters on Earth

On Earth, the recognition of impact craters is a branch of geology, as opposed to astronomy on other worlds. Out of many proposed craters, relatively few are confirmed. The following twenty are a sample of articles of confirmed and well-documented impact sites.

Barringer Crater, a.k.a. Meteor Crater (Arizona, USA)
Chesapeake Bay impact crater (Virginia, USA)
Chicxulub, Extinction Event Crater (Mexico)
Clearwater Lakes (Quebec, Canada)
Gosses Bluff crater (Northern Territory, Australia)
Haughton impact crater (Nunavut, Canada)
Kaali crater (Estonia)
Karakul crater (Tajikistan)
Lonar crater (India)
Manicouagan crater (Quebec, Canada)
Manson crater (Iowa, USA)
Mistastin crater (Labrador, Canada)
Nördlinger Ries (Germany)
Pingualuit crater (Quebec, Canada)
Popigai crater, (Siberia, Russia)
Shoemaker crater (Western Australia, Australia)
Siljan Ring (Sweden)
Sudbury Basin (Ontario, Canada)
Vredefort crater (South Africa)
Wolfe Creek Crater (Western Australia, Australia)

See the Earth Impact Database,^[18] a website concerned with 188 (as of 2016) scientifically-confirmed impact craters on Earth.

Some extraterrestrial craters

Unnamed crater in Caloris Basin, photographed by MESSENGER, 2011

Largest named craters in the Solar System

Tirawa crater straddling the terminator on Rhea, lower right.

Main article: List of largest craters in the Solar System

North Polar Basin/Borealis Basin (disputed) - Mars - Diameter: 10,600 km
South Pole-Aitken basin - Moon - Diameter: 2,500 km
Hellas Basin - Mars - Diameter: 2,100 km
Caloris Basin - Mercury - Diameter: 1,550 km
Imbrium Basin - Moon - Diameter: 1,100 km
Isidis Planitia - Mars - Diameter: 1,100 km
Mare Tranquilitatis - Moon - Diameter: 870 km
Argyre Planitia - Mars - Diameter: 800 km
Rembrandt – Mercury – Diameter: 715 km
Serenitatis Basin - Moon - Diameter: 700 km
Mare Nubium - Moon - Diameter: 700 km
Beethoven - Mercury - Diameter: 625 km
Valhalla - Callisto - Diameter: 600 km, with rings to 4,000 km diameter
Hertzsprung - Moon - Diameter: 590 km
Turgis - Iapetus - Diameter: 580 km
Apollo - Moon - Diameter: 540 km
Engelier - Iapetus - Diameter: 504 km
Mamaldi - Rhea - Diameter: 480 km
Huygens - Mars - Diameter: 470 km
Schiaparelli - Mars - Diameter: 470 km
Rheasilvia - 4 Vesta - Diameter: 460 km
Gerin - Iapetus - Diameter: 445 km
Odysseus - Tethys - Diameter: 445 km
Korolev - Moon - Diameter: 430 km
Falsaron - Iapetus - Diameter: 424 km
Dostoevskij - Mercury - Diameter: 400 km
Menrva - Titan - Diameter: 392 km
Tolstoj - Mercury - Diameter: 390 km
Goethe - Mercury - Diameter: 380 km
Malprimis - Iapetus - Diameter: 377 km
Tirawa - Rhea - Diameter: 360 km
Orientale Basin - Moon - Diameter: 350 km, with rings to 930 km diameter
Evander - Dione - Diameter: 350 km
Epigeus - Ganymede - Diameter: 343 km
Gertrude - Titania - Diameter: 326 km
Telemus - Tethys - Diameter: 320 km
Asgard - Callisto - Diameter: 300 km, with rings to 1,400 km diameter
Vredefort crater - Earth - Diameter: 300 km
Kerwan - Ceres - Diameter: 284 km
Powehiwehi - Rhea - Diameter: 271 km

There are approximately twelve more impact craters/basins larger than 300 km on the Moon, five on Mercury, and four on Mars.^[19] Large basins, some unnamed but mostly smaller than 300 km, can also be found on Saturn's moons Dione, Rhea and Iapetus.

References

↑ Spectacular new Martian impact crater spotted from orbit, Ars Technica, Feb 6 2014.
↑ Basaltic Volcanism Study Project. (1981). Basaltic Volcanism on the Terrestrial Planets; Pergamon Press, Inc.: New York, p. 746. http://articles.adsabs.harvard.edu//full/book/bvtp./1981//0000746.000.html.
↑ Consolmagno, G.J.; Schaefer, M.W. (1994). Worlds Apart: A Textbook in Planetary Sciences; Prentice Hall: Englewood Cliffs, NJ, p.56.
↑ French, B.M. (1998). Traces of Catastrophe: A Handbook of Shock-Metamorphic Effects in Terrestrial Meteorite Impact Structures; Simthsonian Institution: Washington DC, p. 97. http://www.lpi.usra.edu/publications/books/CB-954/CB-954.intro.html.
↑ Carr, M.H. (2006) The surface of Mars; Cambridge University Press: Cambridge, UK, p. 23.
↑ Grieve R.A.; Shoemaker, E.M. (1994). The Record of Past Impacts on Earth in Hazards due to Comets and Asteroids, T. Gehrels, Ed.; University of Arizona Press, Tucson, AZ, pp. 417-464.
1 2 Bottke, WF; Vokrouhlický D Nesvorný D. (2007). "An asteroid breakup 160 Myr ago as the probable source of the K/T impactor". Nature 449 (7158): 48–53. Bibcode:2007Natur.449...48B. doi:10.1038/nature06070. PMID 17805288.
↑ Zahnle, K.; et al. (2003). "Cratering rates in the outer Solar System". Icarus 163: 263. Bibcode:2003Icar..163..263Z. doi:10.1016/s0019-1035(03)00048-4.
↑ Grieve, R.A.F.; Cintala, M.J.; Tagle, R. (2007). Planetary Impacts in Encyclopedia of the Solar System, 2nd ed., L-A. McFadden et al. Eds, p. 826.
↑ Shoemaker, E.M.; Shoemaker, C.S. (1999). The Role of Collisions in The New Solar System, 4th ed., J.K. Beatty et al., Eds., p. 73.
↑ Grieve, R.A.F. (1990) Impact Cratering on the Earth. Scientific American, April 1990, p. 66.
1 2 3 "How fast are meteorites traveling when they reach the ground". American Meteor Society. Retrieved September 2015.
↑ Kenkmann, Thomas; Hörz, Friedrich; Deutsch, Alexander. Large Meteorite Impacts III. Geological Society of America. p. 34. ISBN 0-8137-2384-1.
1 2 3 4 Melosh, H.J., 1989, Impact cratering: A geologic process: New York, Oxford University Press, 245 p.
↑ 'Key to Giant Space Sponge Revealed', Space.com, 4 July 2007
↑ Nested CratersESP_027610_2205 at HiRISE Operations Center, University of Arizona
↑ US Geological Survey. "Iowa Meteorite Crater Confirmed". Retrieved 7 March 2013.
↑ Impact Cratering on Earth
↑ USGS Astrogeology: Gazetteer of Planetary Nomenclature

Charles A. Wood and Leif Andersson, New Morphometric Data for Fresh Lunar Craters, 1978, Proceedings 9th Lunar and Planet. Sci. Conf.
Bond, J. W., "The development of central peaks in lunar craters", Earth, Moon, and Planets, vol. 25, December 1981.
Melosh, H.J., 1989, Impact cratering: A geologic process: New York, Oxford University Press, 245 p.
Baier, J., Die Auswurfprodukte des Ries-Impakts, Deutschland, in Documenta Naturae, Vol. 162, 2007. ISBN 978-3-86544-162-1

External links

Wikimedia Commons has media related to Impact craters.

The Geological Survey of Canada Crater database, 172 impact structures
Aerial Explorations of Terrestrial Meteorite Craters
Impact Meteor Crater Viewer Google Maps Page with Locations of Meteor Craters around the world
Solarviews: Terrestrial Impact Craters
Lunar and Planetary Institute slidshow: contains pictures
Vepriai impact crater

Impact cratering on Earth

Lists	Worldwide Africa Antarctica Asia Australia Europe North America South America By country

Confirmed ≥20 km diameter	Acraman Amelia Creek Araguainha Beaverhead Boltysh Carswell Charlevoix Chesapeake Bay Chicxulub Clearwater East & West Gosses Bluff Haughton Kamensk Kara Karakul Keurusselkä Lappajärvi Logancha Manicouagan Manson Mistastin Mjølnir Montagnais Morokweng Nördlinger Ries Obolon' Popigai Presqu'île Puchezh-Katunki Rochechouart Saint Martin Shoemaker Siljan Ring Slate Islands Steen River Strangways Sudbury Tookoonooka Tunnunik Vredefort Woodleigh Yarrabubba

Topics	Alvarez hypothesis Breccia Coesite Complex crater Cretaceous–Paleogene boundary Cryptoexplosion Ejecta blanket Impact crater Impact structure Impactite Late Heavy Bombardment Lechatelierite Meteorite Moldavite Ordovician meteor event Planar deformation features Shatter cone Shock metamorphism Shocked quartz Stishovite Suevite Tektite

Research	Baldwin, Ralph Belknap Barringer, Daniel Barringer Medal Chao, Edward C T Dietz, Robert S Hartmann, William K Melosh, H Jay Ryder, Graham Schultz, Peter H Shoemaker, Eugene Earth Impact Database Impact Field Studies Group Lunar and Planetary Institute Traces of Catastrophe

Authority control	NDL: 00564159

This article is issued from Wikipedia - version of the Friday, May 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.