Impact pressure

In compressible fluid dynamics, impact pressure (dynamic pressure) is the difference between total pressure (also known as pitot pressure or stagnation pressure) and static pressure.[1] [2] In aerodynamics notation, this quantity is denoted as q_c or Q_c.

When input to an airspeed indicator, impact pressure is used to provide a calibrated airspeed reading. An air data computer with inputs of pitot and static pressures is able to provide a Mach number and, if static temperature is known, true airspeed.

Some authors in the field of compressible flows use the term dynamic pressure or compressible dynamic pressure instead of impact pressure.[3][4]

Isentropic flow

In isentropic flow the ratio of total pressure to static pressure is given by:[3]

\frac{P_t}{P} = \left(1+ \frac{\gamma -1}{2} M^2 \right)^\tfrac{\gamma}{\gamma - 1}

where:

P_t is total pressure

P is static pressure

\gamma\; is the ratio of specific heats

M\; is the freestream Mach number


Taking \gamma\; to be 1.4, and since \;P_t=P+q_c


\;q_c = P\left[\left(1+0.2 M^2 \right)^\tfrac{7}{2}-1\right]


Expressing the incompressible dynamic pressure as \;\tfrac{1}{2}\gamma PM^2 and expanding by the binomial series gives:


\;q_c=q \left(1 + \frac{M^2}{4} + \frac{M^4}{40} + \frac{M^6}{1600}   ... \right)\;

where:

\;q is dynamic pressure

References

  1. DoD and NATO definition of impact pressure Retrieved on 2008-10-01
  2. The Free Dictionary Retrieved on 2008-10-01
  3. 3.0 3.1 Clancy, L.J., Aerodynamics, Section 3.12 and 3.13
  4. "the dynamic pressure is equal to half rho vee squared only in incompressible flow."
    Houghton, E.L. and Carpenter, P.W. (1993), Aerodynamics for Engineering Students, Section 2.3.1

See also

This article is issued from Wikipedia - version of the Sunday, August 31, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.