Intel 8288
Intel 8288
The Intel 8288 is a bus controller designed for Intel 8086/8087/8088/8089. The chip is supplied in 20-pin DIP package. The 8086 (and 8088) operate in maximum mode, so they are configured primarily for multiprocessor operation or for working with coprocessors. Necessary control signals are generated by the 8288. It was used in the IBM PC, XT and its clones.[1] IBM PC AT used its successor Intel 82288.
Pin assignment and function for the control lines
| Name | Pin | Input (I), Output (O) |
Function |
|---|---|---|---|
| VCC | 20 | Input power (+5 V) | |
| GND | 10 | Mass (0 V) | |
| S0, S1, S2 | 19, 3, 18 | I | Status input |
| CLK | 2 | I | Clock |
| AEN | 6 | I | Address Enable |
| CEN | 15 | I | Command Enable |
| IOB | 1 | I | Input/Output Bus Mode |
| MRDC | 7 | O | Memory Read Command |
| MWTC | 9 | O | Memory Write Command |
| AMWC | 8 | O | Advanced Memory Write Command |
| IORC | 13 | O | I/O Read Command |
| IOWC | 11 | O | I/O Write Command |
| AIOWC | 12 | O | Advanced I/O Write Command |
| INTA | 14 | O | Interrupt Acknowledge |
| DT/R | 4 | O | Data Transmit/Receive |
| DEN | 16 | O | Data Enable |
| MCE/PDEN | 17 | O | MCE (if IOB is LOW), PDEN (if IOB is HIGH) |
| ALE | 5 | O | Address Latch Enable |
References
- ↑ "The structure of the original IBM PC's motherboard". tu-chemnitz.de. Retrieved November 27, 2013.
External links
This article is issued from Wikipedia - version of the Friday, May 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.