InterSwitch Trunk

InterSwitch Trunk (IST) is one or more parallel point-to-point links (Link aggregation) that connect two switches together to create a single logical switch. The IST allows the two switches to share addressing information, forwarding tables, and state information, permitting rapid (less than one second) fault detection and forwarding path modification. The link may have different names depending on the vendor. For example, Brocade calls this an Inter-Chassis Link (ICL).[1] Cisco calls this a VSL (Virtual Switch Link).[2]

Edge switches, servers or PCs see the two aggregate switches as one large switch. This allows any vendor's equipment configured to use the IEEE 802.3ad static link aggregation protocol to connect to both switches and take advantage of load balancing, redundant connections.

The IST protocol was developed by Nortel (now acquired by Avaya) to enhance the capabilities of Link aggregation, and is required to be configured prior to configuring the SMLT, DSMLT or R-SMLT functions on the two aggregate (core, distribution, or access) switches. The edge equipment can be configured with any of the following; Multi-Link Trunking (MLT), DMLT, IEEE 802.3ad static link aggregation, IEEE 802.3ad Static Gigabit EtherChannel (GEC), IEEE 802.3ad Static Fast EtherChannel (FEC), SMLT, DSMLT, and other static link aggregation protocols.

Patent

United States Patent 7173934

Product support

IST is supported on Nortel's Routing Switch 1600, 5000, 8300, ERS 8600, MERS 8600 products and also on Avaya's Virtual Services Platform VSP 7000 and VSP 9000.

See also

References

External links

Look up IST in Wiktionary, the free dictionary.
Wikimedia Commons has media related to Avaya.
Wikimedia Commons has media related to Nortel.
This article is issued from Wikipedia - version of the Sunday, June 23, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.