Iron metallurgy in Africa

The topic Iron metallurgy in preindustrial sub-Saharan Africa encompasses both studies of the technology and archaeology of indigenous iron production, and also an understanding of the role that iron production played in African societies before European colonization of the subcontinent.

Archaeological evidence for the origins and spread of iron production in Africa

Although the origins of iron working in Africa have been the subject of scholarly interest since the 1860s, it is still not known whether this technology diffused into sub-Saharan Africa from the Mediterranean region, or whether it was invented there quite independently of iron working elsewhere.[1] Although some nineteenth-century European scholars favored an indigenous invention of iron working in sub-Saharan Africa, archaeologists writing between 1945 and 1965 mostly favored diffusion of iron smelting technology from Carthage across the Sahara to West Africa, or from Meroe on the upper Nile to central Africa, or both.[2] The invention of radiocarbon dating in the late 1950s made it possible to date metallurgical sites in sub-Saharan Africa (since the fuel used for smelting and forging was always charcoal) and by the late 1960s some surprisingly early radiocarbon dates had been obtained for iron smelting sites in both Nigeria and central Africa (Rwanda, Burundi). This led some scholars to state that iron was independently invented in sub-Saharan Africa[3][4] These conclusions were premature, for there was no firm evidence at that time for the antiquity of ironworking in either Carthage or Meroe. Evidence of early Phoenician iron smelting in the western Mediterranean (900-800 BCE) was not found until the 1990s[5] and it is still not known when iron working was first practiced in Kush and Meroe in modern Sudan.

From the mid-1970s there were new claims for independent invention of iron smelting on central Niger[6][7][8] and from 1994–1999 UNESCO funded an initiative "Les Routes du Fer en Afrique/The Iron Routes in Africa" to investigate the origins and spread of iron metallurgy in Africa. This funded both the conference on early iron in Africa and the Mediterranean[9] and a volume, published by UNESCO, that has generated much controversy because it included only authors sympathetic to the view that iron was independently invented in Africa.[10]

Two major reviews of the evidence were published in the mid-2000s.[11][12] Both authors concluded that there were major technical flaws in each of the studies claiming independent invention. Three major issues were identified. The first was whether the material dated by radiocarbon was in secure archaeological association with iron-working residues. (Many of the dates from Niger, for example, were on organic matter in potsherds that were lying on the ground surface together with iron objects). The second issue is the possible effect of "old carbon" - wood or charcoal much older than the time at which iron was smelted. This is a particular problem in Niger, where the charred stumps of ancient trees are a potential source of charcoal, and have sometimes been mis-identified as smelting furnaces. A third issue is the inherent lack of precision of the radiocarbon method itself in the range from 800 to 400 BC, which is attributable to irregular production of radiocarbon in the upper atmosphere. Unfortunately most radiocarbon dates for the initial spread of iron metallurgy in sub-Saharan Africa fall within this range.

Controversy flared again with the publication of excavations by Étienne Zangato and colleagues of their excavations in the Central African Republic.[13][14] At the site of Oboui they excavated an undated iron forge, for which they obtained eight consistent radiocarbon dates of 2000 BC. This would make Oboui the oldest iron working site in the world, and more than a thousand years older than any other dated evidence of iron in Central Africa. Opinion among African archaeologists is sharply divided. Some accept this interpretation, but it has also been suggested that Oboui is a highly disturbed site, with older charcoal having been brought up to the level of the forge by the digging of pits into older levels [15] Questions have also been raised about the unusually good state of preservation of metallic iron from the site.[16]

In summary, there is no proof that iron working technology was taken across the Sahara into sub-Saharan Africa; nor is there proof of independent invention. Given the multitude of potential problems with radiocarbon dating in the first millennium BC, archaeologist trying to date the earliest African metallurgy need to make routine use of luminescence dating of the baked clay from smelting furnaces.

Even though the origin(s) of iron smelting are difficult to date by radiocarbon, there are fewer problems with using it to track the spread of ironworking after 400 BC. In the 1960s it was suggested that iron working was spread by speakers of Bantu languages, the original homeland of which has been located by linguists in the Benue River valley of eastern Nigeria and Western Cameroon. It has been since been shown that no words for iron or ironworking can be traced to reconstructed proto-Bantu,[17] so clearly metallurgy was acquired long after the original dispersal of Bantu-speakers. The linguist Christopher Ehret argues that the first words for iron-working in Bantu languages were borrowed from Central Sudanic languages, probably somewhere in the vicinity of modern Uganda and Kenya,[18] while Jan Vansina[19] argues instead that they originated in non-Bantu languages in Nigeria, and that iron metallurgy spread southwards and eastwards to speakers of Bantu languages, which had already dispersed into the Congo rainforest and into the Great Lakes region. Whichever of these interpretations is correct, the archaeological evidence clearly indicates that iron and cereal agriculture (millet and sorghum) spread together from southern Tanzania and northern Zambia, starting in the first century BC, all the way south to the eastern Cape region of present South Africa, which was reached by the third of fourth century AD[20] It seems highly probable that both iron metallurgy and cereal agriculture were spread through this vast area by migrations of people speaking Bantu languages.

Techniques

All indigenous African iron smelting processes are variants of the bloomery process. A much wider range of bloomery smelting processes has been recorded on the African continent than elsewhere in the Old World, probably because bloomeries remained in use into the 20th century in many parts of sub-Saharan Africa, whereas in Europe and most parts of Asia they were replaced by the blast furnace before most varieties of bloomeries could be recorded. W.W. Cline's compilation of eye-witness records of bloomery iron smelting over the past 250 years in Africa[21] is invaluable, and has been supplemented by more recent ethnoarchaeological and archaeological studies. Furnaces used in the 19th and 20th centuries ranges from small bowl furnaces, dug down from the ground surface and powered by bellows, through bellows-powered shaft furnaces up to 1.5 m tall, to 6.5m natural-draft furnaces (i.e. furnaces designed to operate without bellows at all). The truly remarkable variety of African bloomery furnaces presumably reflects local adaptations to particular ores, ecological conditions and social circumstances, such as abundance or shortage of labour.

Over much of tropical Africa the ore used was laterite, which is widely available on the old continental cratons in West, Central and Southern Africa. Magnetite sand, concentrated in streams by flowing water, was often used in more mountainous areas, after beneficiation to raise the concentration of iron. Precolonial iron workers in present South Africa even smelted iron-titanium ores that cannot be used by modern blast furnaces.This is because titanium oxide is not reduced in bloomeries, and mixes readily with iron and silica to produce fluid slags. In the blast furnace titanium oxide is partially reduced and makes the calcium-magnesium-silica-alumina slags sticky, so that they cannot be drained from the furnace.[22] Bloomery furnaces were less productive than blast furnaces, but were far more versatile.

The fuel used was invariably charcoal, and the products were the bloom (a solid mass of iron) and slag (a liquid waste product). African ironworkers regularly produced inhomogeneous steel blooms, especially in the large natural-draft furnaces. The blooms invariably contained some entrapped slag, and after removal from the furnace had to be reheated and hammered to expel as much of the slag as possible. Semi-finished bars of iron or steel were widely traded in some parts of West Africa, as for example at Sukur on the Nigeria-Cameroon border, which in the nineteenth century exported thousands of bars per year north to the Lake Chad Basin.[23] Although many African ironworkers produced steel blooms, there is little evidence in sub-Saharan as yet for hardening of steel by quenching and tempering. or for the manufacture of composite tools combining a hard steel cutting edge with a soft but tough iron body. Relatively little metallography of ancient African iron tools has yet been done, so this conclusion may perhaps be modified by future work.

Unlike bloomery iron-workers in Europe, India or China, African metalworkers did not make use of water power to blow bellows in furnaces too large to be blown by hand-powered bellows. This is partly because sub-Saharan Africa has much less potential for water power than these other regions, but also because there were no engineering techniques developed for converting rotary motion to linear motion. African ironworkers did however invent a way to increase the size of their furnaces, and thus the amount of metal produced per charge, without using bellows. This was the natural-draft furnace, which is designed to reach the temperatures necessary to form and drain slag by using a chimney effect – hot air leaving the topic of the furnace draws in more air through openings at the base. (Natural-draft furnaces should not be confused with wind-powered furnaces, which were invariably small). The natural-draft furnace was the one African innovation in ferrous metallurgy that spread widely.[24] Natural draft furnaces were particularly characteristic of African savanna woodlands, and were used in two belts – across the Sahelian woodlands from Senegal in the west to Sudan in the east, and in the Brachystegia-Julbenardia (miombo) woodlands from southern Tanzania south to northern Zimbabwe. The oldest natural-draft furnaces yet found are in Burkina Faso and date to the seventh/eight centuries [25] The large masses of slag (10,000 to 60,000 tons) noted in some locations in Togo, Burkina Faso and Mali reflect the great expansion of iron production in West Africa after 1000 CE that is associated with the spread of natural-draft furnace technology.[26][27] But not all large scale iron production in Africa was associated with natural draft furnaces – those of Meroe (Sudan, first to fifth centuries CE) were produced by slag-tapping bellows-driven furnaces,[28] and the large 18th-19th century iron industry of the Cameroon grasslands by non-tapping bellows-driven furnaces.[29] All of the large-scale iron smelting recorded so far are in the Sahelian and Sudanic zones that stretch from Senegal in the west to Sudan in the east; there were no iron-smelting concentrations like these in central or southern Africa.

These techniques are now extinct in all regions of sub-Saharan Africa, except for some very remote regions of Ethiopia. In most regions of Africa they fell out of use before 1950. The main reason for this was the increasing availability of iron imported from Europe. Blacksmiths still work in rural areas of Africa to make and repair agricultural tools, but the iron that they use is imported, or recycled from old motor vehicles.

Uses

Iron was not the only metal to be used in Africa; copper and brass were widely utilised too. However the steady spread of iron meant it must have had more favourable properties for many different uses. Its durability over copper meant that it was used to make many tools from farming pieces to weaponry. Iron was used for personal adornment in jewelry, impressive pieces of artwork and even instruments. It was used for coins and currencies of varying forms. For example, kisi pennies; a traditional form of iron currency used for trading in West Africa. They are twisted iron rods ranging from <30 cm to >2m in length. Suggestions for their uses vary from marital transactions, or simply that they were a convenient shape for transportation, melting down and reshaping into a desired object. There are many different forms of iron currency, often regionally differing in shape and value. Iron did not replace other materials, such as stone and wooden tools, but the quantity of production and variety of uses met were significantly high by comparison.

Social and cultural significance

It is important to recognize that while iron production had great influence over Africa both culturally in trade and expansion (Martinelli, 1993, 1996, 2004), as well as socially in beliefs and rituals, there is great regional variation. Much of the evidence for cultural significance comes from the practises still carried out today by different African cultures. Ethnographical information has been very useful in reconstructing the events surrounding iron production in the past, however the reconstructions could have become distorted through time and influence by anthropologist's studies.

The Iron Age of Africa was based around the agricultural revolution, driven by the use of iron tools. Tools for cultivation and farming made production far more efficient and possible on much larger scales. Fishing hooks, arrow heads and spears aided hunting. Iron weapons also influenced warfare. These items, in addition to the production of other iron goods helped stimulate economic activity, the rise of chiefdoms and even states. The control of iron production was often by ironworkers themselves, or a "central power" in larger societies such as kingdoms or states (Barros 2000, p. 154).[30] The demand for trade is believed to have resulted in some societies working only as smelters or smiths, specialising in just one of the many skills necessary to the production process. It is possible that this also led to tradesmen specialising in transporting and trading iron (Barros 2000, pg152). However, not every region benefited from industrialising iron production, some suffered environmentally from problems that arose due to the massive deforestation required to provide the charcoal for fuelling furnaces (for example the ecological crisis of the Mema Region (Holl 2000, pg48)).

Iron smelters and smiths received different social status depending on their culture. Some were lower in society due to the aspect of manual labour and associations with witchcraft, for example in the Maasai and Tuareg (Childs et al. 2005 pg 288). In other cultures the skills are often passed down through family and would receive great social status (sometimes even considered as witchdoctors) within their community. Their powerful knowledge allowed them to produce materials on which the whole community relied. In some communities they were believed to have such strong supernatural powers that they were regarded as highly as the king or chief. For example, an excavation at the royal tomb of King Rugira (Great Lakes, Eastern Africa) found two iron anvils placed at his head (Childs et al. 2005, p. 288 in Herbert 1993:ch.6), suggesting their importance and powerful significance. In some cultures mythical stories have been built around the premise of the iron smelter emphasising their godlike significance.

Rituals

The smelting process was often carried out away from the rest of the community. Ironworkers became experts in rituals to encourage good production and to ward off bad spirits, including song and prayers, plus the giving of medicines and even sacrifices. The latter are usually put in the furnace itself or buried under the base of the furnace. Examples of these date back as far as the early Iron Age in Tanzania and Rwanda (Schmidt 1997 in Childs et al., 2005 p. 293).[31]

Some cultures associated sexual symbolism with iron production. Smelting is integrated with the fertility of their society, as with natural reproduction the production of the bloom is compared to the conception and birth. There are many strict taboos surrounding the process. The smelting process is carried out entirely by men and often away from the village. For women to touch any of the materials or be present could jeopardise the success of the production. The furnaces are also often extravagantly adorned to resemble a woman, the mother of the bloom.

See also

References

  1. ↑ Alpern, S. B. (2005) Did they or didn’t they invent it? Iron in sub-Saharan Africa. History in Africa 32:41-94.
  2. ↑ van der Merwe, N. J. 1980. The advent of iron in Africa. In The Coming of the Age of Iron, eds. T. S. Wertime, J.D. Muhly, pp. 463-506. New Haven: Yale University Press.
  3. ↑ Trigger, B. G. (1969). The myth of Meroe and the African Iron Age. International Journal of African Historical Studies 2 :23-50.
  4. ↑ Diop, C.A. (1976). L’usage du fer en Afrique. Nyame Akuma 53:93-95.
  5. ↑ Descoeudres, E. Huysecom, V. Serneels and J.-L. Zimmermann (editors) (2001) The Origins of Iron Metallurgy: Proceedings of the First International Colloquium on The Archaeology of Africa and the Mediterranean Basin/Aux Origines de la Métallurgie du Fer: Actes de la Première Table Ronde Internationale d’Archéologie (L’Afrique et le Bassin Méditerranéen). Special Issue of the journal Mediterranean Archaeology (volume 14)
  6. ↑ Quéchon, G. and J.-P. Roset (1974). Prospection archéologique du massif du Termit (Niger). Cahiérs ORSTOM, Série Sciences Humaines 11:85-104.
  7. ↑ Grébénart, D. (1985). La Region d'In Gall-Tegidda n Tesemt (Niger), Programme Archéologique d'Urgence 1977–1981. II: Le Néolithique Final et les Débuts de la Métallurgie. Niamey: Institut de Récherches en Sciences Humaines (Études Nigeriennes, no. 49).
  8. ↑ Paris, F., A. Person, G. Quéchon and J.-F. Saliège (1992). Les débuts de la métallurgie au Niger septentrional (Aïr, Azawagh, Ighazer, Termit). Journal de la Société des Africanistes 62:55-68.
  9. ↑ Descoeudres at al. 2001 (above)
  10. ↑ Bocoum, H. (ed.) 2004 The Origins of Iron Metallurgy in Africa: New Light on Its Antiquity – West and Central Africa. Geneva:UNESCO
  11. ↑ Killick, D.J. (2004) Review Essay. What do we know about African iron working? Journal of African Archaeology 2(1):97-112.
  12. ↑ Alpern 2005 (above)
  13. ↑ Zangato, E. (2007) Les Ateliers d’Oboui: Premières Communautés Métallurgistes dans le Nord-Ést du Centrafrique. Paris: Editions Recherche sur les Civilisations (ERC).
  14. ↑ Zangato, E. and Holl, A.F.C. (2010) ‘On the iron front: new evidence from Central Africa’, Journal of African Archaeology 8:7-23.
  15. ↑ Clist, B. (2012) Vers une réduction des prejugés et la fonte des antagonisms: un bilan de l’expansion de la métallurgie du fer en Afrique sud-Saharienne, Journal of African Archaeology 10:71-84.
  16. ↑ Pringle, H. 2009. Seeking Africa's first iron men. Science 323:200-202.
  17. ↑ de Maret, P and F. Nsuka (1977) History of Bantu metallurgy: some linguistic aspects. History in Africa 4:43-65
  18. ↑ Ehret, C. (2000) The establishment of iron-working in Eastern, Central and South Africa: linguistic Inferences on technological history. Sprache ind Geschichte in Afrika 16/7:125-176.
  19. ↑ Vansina, J. (2006) Linguistic evidence for the introduction of ironworking into Bantu-speaking Africa. History in Africa 33: 321-361.
  20. ↑ Killick, D. (2014) Cairo to Cape: the spread of metallurgy through eastern and southern Africa. In Archaeometallurgy in Global Perspective: Methods and Syntheses, edited by Ben Roberts and Christopher Thornton, pp. 507-528. New York: Springer.
  21. ↑ Cline, W.W. (1937) Mining and Metallurgy in Negro Africa. Menasha, WI: George Banta
  22. ↑ Killick, D.J. and D. Miller (2014). Smelting of magnetite and magnetite-ilmenite ores in the northern Lowveld, South Africa, ca. 1000 CE – ca.1880 CE. Journal of Archaeological Science 43:239-255.
  23. ↑ David, N. (editor) Metals in Mandara Mountains Society and Culture. Trenton, NJ: Africa World Press.
  24. ↑ Killick, D. J. (1991) A little known extractive process: iron smelting in natural-draft furnaces. JOM (Journal of the Minerals, Metals and Materials Society) 43(4):62-64.
  25. ↑ Serneels, V., Donadini, F., Kiénon-Kaboré, H.T., Koté, L.,Kouassi, S.K., Ramseyer, D. and Simporé, L. (2014) Origine et développement de la métallurgie du fer au Burkina Faso et en Côte d’Ivoire. Avancement des recherches en 2013 et quantification des vestiges de Korsimoro (Burkina Faso). Schweizerisch-Liechtensteinische Stiftung für Archäologische Forshungen I'm Ausland (SLSA), Annual Report 2013:65-112.
  26. ↑ Robion-Brunner C. (2010) Forgerons et Sidérurgie en pays Dogon: Vers une Histoire de la Production du Fer sur le Plateau de Bandiagara (Mali) durant les Empires Précoloniaux. Journal of African Archaeology Monograph Series vol.3. Frankfurt: Africa Magna Verlag.
  27. ↑ de Barros, P. (1985). Bassar: a quantified, chronologically controlled, regional approach to a traditional iron production centre in West Africa. Africa 56:148-174.
  28. ↑ Shinnie, P.L. and F.J. Kense (1982) Meroitic iron working, in: N.B. Millet, A.L. Kelley (Eds.) Meroitic Studies: Proceedings of the Third International Meroitic Conference, Toronto 1977, Akademie-Verlag, Berlin, DDR, 1982, pp. 17-28.
  29. ↑ Warnier, J.-P. and Fowler, I. (1979). A nineteenth-century Ruhr in central Africa. Africa 49:329-351.
  30. ↑ de Barros, P., 2000. "Iron Metallurgy: Sociocultural Context". J. O. (ed.) Ancient African Metallurgy, The Socio- Cultural Context. England: Rowman and Littlefield Publishers Inc, pp. 147–198
  31. ↑ Schmidt, P.R., 1997. Iron Technology In East Africa. Symbolism, Science and Archaeology. Oxford, James Currey Publishers.

Bibliography

MetalAfrica: a Scientific Network on African Metalworking

This article is issued from Wikipedia - version of the Saturday, March 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.