Isostasy

Isostasy (Greek ísos "equal", stásis "standstill") is the state of gravitational equilibrium between Earth's crust and mantle such that the crust "floats" at an elevation that depends on its thickness and density of underlying roots of the low density of the mountain.

This concept is invoked to explain how different topographic heights can exist at Earth's surface. When a certain area of Earth's crust reaches the state of isostasy, it is said to be in isostatic equilibrium. Isostasy does not upset equilibrium but instead restores it (a negative feedback). It is generally accepted [1] that Earth is a dynamic system that responds to loads in many different ways. However, isostasy provides an important 'view' of the processes that are happening in areas that are experiencing vertical movement. Certain areas (such as the Himalayas) are not in isostatic equilibrium, which has forced researchers to identify other reasons to explain their topographic heights (in the case of the Himalayas, which are still rising, by proposing that their elevation is being "propped-up" by the force of the impacting Indian plate; the Basin and Range Province of the Western US is another example of a region not in isostatic equilibrium.)

Although originally defined in terms of continental crust and mantle, it has subsequently been interpreted in terms of lithosphere and asthenosphere, particularly with respect to oceanic island volcanoes such as the Hawaiian Islands.

In the simplest example, isostasy is the principle of buoyancy wherein an object immersed in a fluid is buoyed with a force equal to the weight of the displaced fluid. On a geological scale, isostasy can be observed where Earth's strong crust or lithosphere exerts stress on the weaker mantle or asthenosphere, which, over geological time, flows laterally such that the load is accommodated by height adjustments.

The general term 'isostasy' was coined in the year 1889 by the American geologist Clarence Dutton.[2]

Isostatic models

Three principal models of isostasy are used:

  1. The AiryHeiskanen model – where different topographic heights are accommodated by changes in crustal thickness, in which the crust has a constant density
  2. The PrattHayford model – where different topographic heights are accommodated by lateral changes in rock density.
  3. The Vening Meinesz, or flexural isostasy model – where the lithosphere acts as an elastic plate and its inherent rigidity distributes local topographic loads over a broad region by bending.

Airy and Pratt isostasy are statements of buoyancy, whereas flexural isostasy is a statement of buoyancy when deflecting a sheet of finite elastic strength.

Airy

Airy isostasy, in which a constant-density crust floats on a higher-density mantle, and topography is determined by the thickness of the crust.
Airy isostasy applied to a real-case basin scenario, where the total load on the mantle is composed by a crustal basement, lower-density sediments and overlying marine water

The basis of the model is Pascal's law, and particularly its consequence that, within a fluid in static equilibrium, the hydrostatic pressure is the same on every point at the same elevation (surface of hydrostatic compensation). In other words:

h1⋅ρ1 = h2⋅ρ2 = h3⋅ρ3 = ... hn⋅ρn

For the simplified picture shown the depth of the mountain belt roots (b1) are:


 (h_1+c+b_1)\rho_c = (c\rho_c)+(b_1\rho_m)
 {b_1(\rho_m-\rho_c)} = h_1\rho_c
 b_1 = \frac{h_1\rho_c}{\rho_m-\rho_c}

where  \rho_m is the density of the mantle (ca. 3,300 kg m−3) and  \rho_c is the density of the crust (ca. 2,750 kg m−3). Thus, we may generally consider:


b1 ≅ 5⋅h1

In the case of negative topography (i.e., a marine basin), the balancing of lithospheric columns gives:


 c\rho_c = (h_2\rho_w)+(b_2\rho_m)+[(c-h_2-b_2)\rho_c]
 {b_2(\rho_m-\rho_c)} = {h_2(\rho_c-\rho_w)}
 b_2 = (\frac{\rho_c-\rho_w}{\rho_m-\rho_c}){h_2}

where  \rho_m is the density of the mantle (ca. 3,300 kg m−3),  \rho_c is the density of the crust (ca. 2,750 kg m−3) and  \rho_w is the density of the water (ca. 1,000 kg m−3). Thus, we may generally consider:


b2 ≅ 3.2⋅h2

Pratt

For the simplified model shown the new density is given by:  \rho_1 = \rho_c \frac{c}{h_1+c} , where h_1 is the height of the mountain and c the thickness of the crust.

Vening Meinesz / flexural

Cartoon showing the isostatic vertical motions of the lithosphere (grey) in response to a vertical load (in green)

This hypothesis was suggested to explain how large topographic loads such as seamounts (e.g. Hawaiian Islands) could be compensated by regional rather than local displacement of the lithosphere. This is the more general solution for lithospheric flexure, as it approaches the locally compensated models above as the load becomes much larger than a flexural wavelength or the flexural rigidity of the lithosphere approaches 0.

Isostatic effects of deposition and erosion

When large amounts of sediment are deposited on a particular region, the immense weight of the new sediment may cause the crust below to sink. Similarly, when large amounts of material are eroded away from a region, the land may rise to compensate. Therefore, as a mountain range is eroded, the (reduced) range rebounds upwards (to a certain extent) to be eroded further. Some of the rock strata now visible at the ground surface may have spent much of their history at great depths below the surface buried under other strata, to be eventually exposed as those other strata eroded away and the lower layers rebounded upwards.

An analogy may be made with an iceberg—it always floats with a certain proportion of its mass below the surface of the water. If more ice is added to the top of the iceberg, the iceberg will sink lower in the water. If a layer of ice is somehow sliced off the top of the iceberg, the remaining iceberg will rise. Similarly, Earth's lithosphere "floats" in the asthenosphere.

Isostatic effects of plate tectonics

When continents collide, the continental crust may thicken at their edges in the collision. If this happens, much of the thickened crust may move downwards rather than up as with the iceberg analogy. The idea of continental collisions building mountains "up" is therefore rather a simplification. Instead, the crust thickens and the upper part of the thickened crust may become a mountain range.

However, some continental collisions are far more complex than this, and the region may not be in isostatic equilibrium, so this subject has to be treated with caution.

Isostatic effects of ice sheets

Main article: Post-glacial rebound

The formation of ice sheets can cause Earth's surface to sink. Conversely, isostatic post-glacial rebound is observed in areas once covered by ice sheets that have now melted, such as around the Baltic Sea and Hudson Bay. As the ice retreats, the load on the lithosphere and asthenosphere is reduced and they rebound back towards their equilibrium levels. In this way, it is possible to find former sea cliffs and associated wave-cut platforms hundreds of metres above present-day sea level. The rebound movements are so slow that the uplift caused by the ending of the last glacial period is still continuing.

In addition to the vertical movement of the land and sea, isostatic adjustment of the Earth also involves horizontal movements. It can cause changes in Earth's gravitational field and rotation rate, polar wander, and earthquakes.

Eustasy and relative sea level change

Main article: Eustasy

Eustasy is another cause of relative sea level change quite different from isostatic causes. The term eustasy or eustatic refers to changes in the amount of water in the oceans, usually due to global climate change. When Earth's climate cools, a greater proportion of water is stored on land masses in the form of glaciers, snow, etc. This results in falling global sea levels (relative to a stable land mass). The refilling of ocean basins by glacial meltwater at the end of ice ages is an example of eustatic sea level rise.

A second significant cause of eustatic sea level rise is thermal expansion of sea water when Earth's mean temperature increases. Current estimates of global eustatic rise from tide gauge records and satellite altimetry is about +3 mm/a (see 2007 IPCC report). Global sea level is also affected by vertical crustal movements, changes in Earth's rotation rate, large-scale changes in continental margins and changes in the spreading rate of the ocean floor.

When the term relative is used in context with sea level change, the implication is that both eustasy and isostasy are at work, or that the author does not know which cause to invoke.

Post-glacial rebound can also be a cause of rising sea levels. When the sea floor rises, which it continues to do in parts of the northern hemisphere, water is displaced and has to go elsewhere.

See also

References

  1. A.B. Watts, Isostasy and flexure of the lithosphere,Cambridge Univ. Press., 2001
  2. "Clarence Edward Dutton" (PDF). 1958. Retrieved 7 October 2014.

Further reading

  • Lisitzin, E. (1974) "Sea level changes". Elsevier Oceanography Series, 8
  • Watts, AB (2001). Isostasy and Flexure of the Lithosphere. Cambridge University Press. ISBN 0-521-00600-7.  A very complete overview with much of the historical development.

External links

This article is issued from Wikipedia - version of the Saturday, March 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.