JCSAT-RA
JCSAT-RA, previously known as JCSAT-12,[2] is a Japanese geostationary communications satellite, which is operated by JSAT Corporation. It was ordered to replace the JCSAT-11 satellite which was lost in a launch failure on a Proton-M/Briz-M rocket in 2007, and is currently used as an on-orbit spare satellite; a role in which it replaced the older JCSAT-R spacecraft, providing a reserve for if one of the company's other satellites fails. It is a 4,000-kilogram (8,800 lb) satellite, which was constructed by Lockheed Martin based on the A2100AX satellite bus, with the same configuration as JCSAT-10 and JCSAT-11.[2] The contract to build JCSAT-12 was awarded on 6 September 2007, the day after JCSAT-11 failed to reach orbit.[3]
It was launched, along with the Australian Optus D3 satellite, by Arianespace.[4] An Ariane 5ECA rocket was used for the launch, which occurred from ELA-3 at the Guiana Space Centre in Kourou, French Guiana. The launch took place at 22:09 GMT on 21 August 2009, at the start of a 60 minute launch window.
JCSAT-12 separated from its carrier rocket into a geosynchronous transfer orbit, from which raise itself to geostationary orbit using a LEROS-1C apogee motor. It has a design life of fifteen years, and carries forty two transponders; twelve G/H band, and thirty J band (US IEEE C and Ku bands respectively).[5]
See also
References
|
|---|
| | | Payloads are separated by bullets ( · ), launches by pipes ( | ). Manned flights are indicated in bold text. Uncatalogued launch failures are listed in italics. Payloads deployed from other spacecraft are denoted in brackets. |
|
|
|---|
| | Launch designations | |
|---|
| | Operational designations | |
|---|
|