Kinner B-5

B-5
A Kinner B-5 on display at the Old Rhinebeck Aerodrome in New York, as used in their Fleet Finch biplane.
Type Radial engine
Manufacturer Kinner Airplane & Motor Corporation
Developed from Kinner K-5
Developed into Kinner R-5

The Kinner B-5 was a popular five cylinder American radial engine for light general and sport aircraft of the 1930s.

Design and development

The B-5 was a development of the earlier K-5 with slightly greater power and dimensions. The main change was the increase in cylinder bore from 108 mm (4.25 in) to 117 mm (4.625 in) and a corresponding increase in displacement from 372 cu in (6.1 liters ) to 441 cu in (7.2 liters ). One difference the B-5 had from radial engines of other manufacturers was that each individual cylinder had its own camshaft, a system also used by the contemporary Soviet-built, 8.6 litre-displacement Shvetsov M-11 five cylinder radial, while most other radial engine designs used a "cam ring" for the same purpose, connected to every cylinder's valves. The B-5 was a rough running but reliable engine and the B-5 and its derivatives were produced in the thousands, powering many World War II trainer aircraft, its military designation was R-440. The B-5 was followed by the R-5 and R-55.

Applications

Specifications (Kinner B-5)

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

References

Wikimedia Commons has media related to Kinner B-5.


    This article is issued from Wikipedia - version of the Wednesday, July 15, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.