Kit and replica cars of New Zealand

Alternative Cars - Swallow

New Zealand had a long history of small garages and vehicle enthusiasts modifying and creating sports and sports racing cars. Out of these interests grew the New Zealand kit and replica car industry with the introduction of fibre-glass car bodies in the 1950s.

Beginnings

Saker GT

In the early 1950s, with the advent of fibreglass bodied cars, a new opportunity arose for local companies associated with car enthusiasts to create car bodies. Among the first of these early manufacturers was Weltex Plastics Limited of Christchurch, which imported a Microplas Mistral sports car mould and began making bodies and chassis in 1956, along with Brian Jarvis. They were followed in 1957 by Frank Cantwell's Puma, the Ching, F10, and Falcon.[1] Also in New Zealand during this period, Ferris de Joux was constructing a variety of sports racers. De Joux is noted in particular for his Mini GT from the 1960s.

The Everson brothers, who were noted for making New Zealand first indigenous twin engined mono-plane, between 1935 to 1937 created a small two-seater rear engined car called the Everson Cherub. Three different one-off models were made by the brothers. Ernest's son Cliff built a variety of Everson models from the 1960s to the 1980s. The most successful was his eight Cherubs that were similar in design to the Mini Moke.

Ross Baker's Heron Cars started in 1962 making racing cars and eventually began producing kit cars in 1980. Bill Ashton, formerly of Microplas and Weltex, joined with Ted George in the 1960s and made the Tiki. Three were known to have been made. Graham McRae with Steve Bond of Gemini Plastics imported a replica Le Mans McLaren M6B styled GT mould in 1968, The cars were made and sold by Dave Harrod and Steve Bond of Fibreglass Developments Ltd, Bunnythorpe as the Maram. McRae went on to make a very good Porsche Spyder replica in the 1990s.

A number of new companies entered the market in the 1980s - Almac 1985, Alternative Cars (1984), Cheetah (1986), Chevron (1984), Countess Mouldings (1988), Fraser (1988), Leitch (1986), and Saker (1989). Some recent ones are Beattie (automobile) (1997), which became Redline in 2001, and McGregor (2001).

Two companies which specialise in making replicas of various models to order are Classic Car Developments (1992) and Tempero. Both of these companies were noted for the quality of their workmanship. Commencing in 2002, Coventry Classics Limited from Gore specialised in making replica Jaguar C-Types.[2]

Notable people

Bill Ashton

Bill Ashton was a contemporary of Ferris de Joux and Peter Pellandine, who after working for Microplas in the UK moved to New Zealand to work for Weltex making the Mistral. He was joined by another Micoplas colleague, Ted George and together in the 1960s made the Tiki.

Ferris de Joux

Main article: de Joux (car)

Ferris de Joux (1935–2009) was a designer, engineer and constructor of sports cars. He was born on 24 August 1935. de Joux was said to have been one of New Zealand's most talented automotive designers. He appeared regularly in motoring magazines such as Motorman and Sports Car World from the 1970s.

Patrick Harlow

Patrick Harlow is a New Zealand automotive historian, journalist, teacher, and car enthusiast who is noted for his work on the New Zealand kit car industry. He has been a regular contributor to New Zealand Classic Car Magazine and the Constructors Car Club magazine, Spare Parts.[3]

Graham McRae

Main article: Graham McRae

Graham McRae (born 5 March 1940) is a former racing driver from New Zealand. He achieved considerable success in Formula 5000 racing, winning the Tasman Series each year from 1971 to 1973, and also the 1972 L&M Continental 5000 Championship in the United States. McRae went on to make Porsche Spyder replicas in New Zealand.

Peter Pellandine

Main article: Peter Pellandine

'Peter Pellandine founded Ashley Laminates with Keith Waddington. They designed and made fibreglass sports cars bodies under the name “Ashley”. In late 1956 Peter Pellandine split from the partnership up Falcon Shells. It had the rights to the short wheel base Ashley 750, which became the Falcon Mk 1 and the Ashley Sports Racer the Falcon Mk II. Pelladine moved to New Zealand with family in 1957 and setting up a New Zealand branch of Falcon Shells. In 1959 he returned to England via Australia.

Manufacturers

Almac

Almac Sabre
Almac 427 Cobra
Main article: Almac (automobile)

Almac is a New Zealand based kit car company founded in 1984 and located in Upper Hutt.[4] Almac cars is a part of Almac Reinforced Plastics Ltd fibreglass product manufacturing a company founded in 1971 by Alex McDonald. McDonald's interest in kit cars started while he was living in England, having purchased a Jem Marsh Sirocco. Jem Marsh founded the Marcos car company.[5]

Alternative Cars

Alternative Cars Limited is a New Zealand-based kit car company that manufactures fiber-glass bodied cars based on the 1950s MG TF.[6] The company was founded by Russell Hooper, a medical supply representative, as Kit Kars Limited in 1984. In 1996 Kit Kars Ltd changed its name to Alternative Cars Limited. Initially the company operated from the owners home, until moving to a small 600 square foot workshop in Auckland.

Amero

The Amero was based on the C3 Corvette

Gordon Hook began making fibreglass bodied cars in 1974 while working as foreman of a fibreglass manufacturing company. His father had been an A grade motor mechanic which had sparked his interest and mechanical ability. His first car was called the Amero 2+2 which was smaller than but had similar styling to the Ford Capri. It is rumoured that this car was first made by an Air New Zealand employee and the body extensively modified by Hook when he acquired it. Hook then went on to make another three of these car bodies between 1974 and 1977.[7]

After this Hook began making fibreglass replacement panels for Australian made Holdens and Fords. In 1979 he obtained a burnt out C3 Corvette, while in the United States. Using this he created his own chassis and fibreglass body panels. Holden HQs were used as the donor car for mechinical parts and wiring. Trim and lights were imported from the United States. The replica C3 Corvette was made between 1983 and 1995. In all 25 kits were made with three versions: roadster, fastback, and T-Top. Hooks final car in this series, a replica Greenwood Corvette, only progressed as far as a prototype.[7]

Between 1993 and 1995 Hook began development of a new car the Amero California. Based around spy photos of the upcoming Chevrolet Camaro, the prototype was completed in mid-1993. Unfortunately no orders eventuated and the Hook left New Zealand in 1995 to live in Australia. The moulds and jigs were sold and no further cars made.[7]

Asco Aura

A 1950's style sports car made between 1984 and 1988 by Peter Andrews of Andrews Sports Car Company of Taupo. The Aura was first shown at the 1985 New Zealand Motor Expo in Auckland. 11 kits were made.[7]

Auckland Cobra

A replica AC Cobra made in Papatoetoe, Auckland by Rex Garland since 1983. The cars are fitted with Ford 302 V8s and Toyota 5 speed gearbox. By 2012 49 kits or turnkeys had been made. Two of these had hard-tops.[7]

Beattie (now Redline)

Lola on which the Beattie is based
Main article: Beattie (automobile)

Beattie was originally a New Zealand kitcar created by Stephen Charles Beattie and its manufacture is now based in the United Kingdom. It made the Beattie SR2000 and Clubman Sports, based on the Lola-Climax Mk1.[8] Kevin Hunt of Redline Performance Cars Limited acquired the design from Stephen Beattie in 1999 and the car was renamed the Redline Sprint with a least two models being available, the Sprint and the Road Sport.[9] It was available up to at least 2007.[10]

Briford Sports

A roadster made by Brian Ford since 1982 and still in production in 2012. It is a cross between an AC Cobra and a Mistral. Up to 2012 16 kits had been made. Most have been sold with Brifords chassis, although some were fitted to others chassis.[7]

Cantwell Car Limited

Falcon and Tiki were based on the Ashley 750 as was the Cantwell Puma

Frank Cantwells company Cantwell Car Limited made a fibreglass sports car called the Puma between 1957 and 1960. The cars used an Ashley 750 body and a chassis designed by New Zealander Arthur Praed. A total of 6 were thought to have been made. There are believed to be only two surviving cars. One of these has been in the United States since 2003.[11]

Cheetah Cars

Cheetah Cars are a New Zealand based kit car company that commenced in 1986 based on a Jaguar E-Type shape. It ceased constructing cars in 1991.

Gideon de Lautour suggested the idea of creating a kit car based on a picture in the 1981 January–March issue of the Australian Sports Car World magazine. It was a BRG Jaquar E-Type S1 convertible that had been stripped of all chrome, had a roll bar installed, a set of lake pipes out the side and flared wheel arches that was being used for classic car racing. De Lautour had extensive experience working on exotic machinery in the United Kingdom.

The body style was to be based on the E-Type with Triumph 2000/2500 chassis and running gear. A Holden HQ was suggested as a better option because they were plentiful, they were cheap and plentiful. Also there were numerous variants from six cylinders to 350 V8's. The running gear was robust and the brakes reasonable for the period. The track was a little wider than the S1/S2 E type. Maximising the use of the donor vehicle for parts was also a key factor. Work started in 1986 in de Latour's garage with the purchase of an HQ which we stripped for parts. An aluminium body was constructed.

An incomplete prototype was presented at the 1988 New Zealand Car Show in Epsom, Auckland. Some sales were generated as was a lot of skepticism.

During construction of the first car fiber-glass sills, doors, and windscreen surround were decided upon to reduce the workload. Tron Cars on Auckland's North Shore were given the task of mould making due to their quality work on a Lamborghini Countach replica and an RX7 based car called the Mountach. Two more vehicles were sold during this period and delivered in 1989 as rolling chassis. Also four chassis were made for the Company Directors to test and improve the assembly manual.

Three events had a negative impact on the company. The 1987 share market collapse, the changed rules in 1989 for importing second hand vehicles, and rumours about possible changes to Government regulations that could add considerably to cost of kit cars. These rumours later proved incorrect but in the interim kit car sales plummeted.

The Directors decided to close down the operation in 1990, sell the prototype and see how the market performed. The existing chassis were taken away and completed the Directors.

Before the operation closed an order was received from Australia. The kit was completed and sent to Launceston, Tasmania in November 1991. In total 9 vehicles were made.

In 2009 there was increased interest in the Cheetah in particular. The company was seeking expressions of interest from parties interested in manufacturing and marketing the vehicle again.

Chevron

Chevron Engineering Specialties Ltd is a New Zealand based kit-car and race-car manufacturer owned by Dan, Evan, and Barbara Fray and founded in 1980.[12] It is based in Massey, Auckland and manufactures three different models, with the Aprisa and Cypher competing in New Zealand sports car racing.

Ching

Alan Watson of Auckland designed and made the prototype sports car in the mid 1950s. Its shape was similar to the Jaguar C type. In 1957 he sold the car to Noel Ching of Nelson.[13] Ching is believed to have built a further four of these cars which used Ford 10 engines. There is a possibility that Peter Colmore-Williams’s company, Sonata Laboratories of Christchurch also made some of these cars. Brain Ford of Briford Sports was restoring one of these cars.[14]

Classic Car Developments

Ferrari 206SP Dino like the model made by Classic Car Developments

Classic Car Developments is a replica car manufacturer formed in 1992 and based in Invercargill, New Zealand owned by Dave Brown. Brown was an aircraft engineer and automotive machinist. He was noted for his attention to detail and the level of accuracy in his replicas.

Classic Car Developments built individual replica cars to order. These have primarily been Jaguar C types and Ford GT40's. Up to 2009 the company had built 22 cars of various types. All but two were exported.[1][2]

Models built to date include:

Concept GT

A replica Ford GT40 made in the early 1990s and marketed in the US by Awesome Imports.[16]

Countess Mouldings

Countess Mouldings made replicas of the Lamborghini Countach

Countess Mouldings Limited made replica Lamborghini Countach sports racing cars in Fielding, New Zealand from 1988 until about 2009. David Short was the owner.[17]

Short's workshop was originally an old wool shed that was used for sheep shearing. It was an average sized workshop, which could accommodate four or five cars. Short often hired extra hands when the orders increased. His first demonstartion vehicle was completed by 1989 and was later used for motor sport. His third demonstrator, built in 1998 was lighter and more powerful. It competed in the 1998 Dunlop Tyres Targa New Zealand rally.[18]

Since 1998 Countess Mouldings have sold over sixty kits, about 25 of which were completed cars. Many of these cvars were exported to Japan. The cars space-frame uses square tube ERW steel and a built in roll cage is made from chrome-alloy and mild steel. The biggest selling point for these cars was their racing history. In 2004 there was talk of a replica Lamborghini Diablo being developed by Short.[19]

The company was removed from the Companies register on 24 August 2011, its last registered document was its 2009 return.[20] Short is now involved in manufacturing and development of innovative portable sheep shears through his company Handypiece Holdings.[21]

Coventry Classics

Coventry Classis made replicas of the Jaguar C-Type

Commencing in 2002, Coventry Classics Limited from Gore specialised in making replica Jaguar C-Types. The cars have an aluminium body and tubular steel chassis. In 2012 prices started from $NZ165,000 depending on options selected. The company is now in the process of developing a lightweight Jaquar E Type for upgrading existing E-types.[22][23]

Daytona Beach Buggy

Peter Clapham's Fibreglass Daytona Limited made one the more successful kit cars, with 80 being made between 1975 and 1983. They were designed to fit on a Volkswagen Beetle chassis. By 1983 demand had reduced for the beach buggies and Clapham had moved on to making spa pools. He sold the moulds to Graeme Rose of Greytown. Several more were made by Rose before production ceased due to a lack of demand.[7] In 1984 Clapham acquired the moulds for the Taipan from Cooke Brothers.[24]

Dixon

David Dixon, a former Steel Brothers company secretary, made a Lotus 7 style turn-key car from 1980-1983. It was also assembled in Australia and marketed as the JSA. The chassis differed from the 7 in that it was a rigid backbone style designed by David and James Smith in Australia. The prototype was completed in 1979. The initial body was aluminium but this was later changed to a fibreglass one made by Cresta Craft of Christchurch.

Peter Manton Motors of Melbourne were JSAs Australian agents and initially ordered 50 cars. Due to low sales the order was cancelled. About 20 cars were made before the company went bankrupt in 1983. Of these 8 were sold in Australia as JSAs. In 1986 the Dixon was revived by Western Fibreglass of Auckland and marketed as the Dixon Sarasan until 1988. In all 7 Sarasan's were made. Western Fibreglass were makers of another Lotus 7 replica called the Lynx.[25]

Escartus

A wedge shaped design V8 powered coupe made by Don and Graeme Ross of Challenge Custom Cars; Onekawa, Napier from 1978 to 1982. Eight were built and costing NZ$52,000 as turn keys in 1980. This price meant they were competing with Mercedes and other high end cars.[7]

Eureka

Eureka
Main article: Purvis Eureka

In 1977 Eureka Cars NZ Limited was established to manufacture the Purvis Eureka in New Zealand. A car that had been designed by Richard Oakes of the United Kingdom. The number of cars made in New Zealand is unknown although some still exist.[26]

Everson

Main article: Everson aircraft

In the 1960s Cliff Everson, Ernest's Everson's son, made several cars under the Everson name. There were four Everson 7s built between 1961 and 1964, which was based on the Lotus 7; eight Everson Cherubs were built between 1964 and 1969, which were based on the BMC Mini and looked similar to the Mini Moke; and between 1981 and 1984 the Everson Eagle, a car based on the Excalibur. The final car Cliff produced was the Everson EMW 6 between 1983 and 1989. It was based on the BMW M1 of the time. Only four were completed, with the 5th car being scrapped.[27]

Exocet

MEV Exocet
Main article: MEV Ltd § Exocet

MEV Limited licenced New Zealander Tom Carpenter to manufacture its Exocet model kit car in 2011 because MEV had difficulty meeting high UK demand. The Exocet was modified to meet New Zealand requirements and uses early model Mazda MX5s as a doner vehicle. Carpenter sold Exocet Cars New Zealand to Paul O'Grady on 1 January 2016.[28][29]

F10 Special

Alan Watson of Papakura had made a fibreglass bodied car in 1957. This car and its moulds, he sold to Noel Ching and Ching went on to make a series of cars from it. Watson then teamed up with apprentices Ron Cox,and Graham MGill while working at the Auckland Railway Workshops along with apprentice panel beater Clarrie Ranby. The four began construction of the first car in September 1958. It had the appearance of a Triumph TR3 with grill similar to that of the Aston Martin DB3. The car was powered by a Ford 10 engine. Four cars built between 1958 and 1961 at Papakura. Of these three were still extant in 2012.[7]

Falcon and Tiki

Main article: Falcon Shells

An Ashley 750 that was made in Gisborne during Peter Pellandine's time in New Zealand and marketed as the Falcon Mk 1. There was also a racing version called the Falcon Mk 2. Pellandine sold the rights to build the Falcon Mk 1 to George and Ashton Limited of Dunedin. They renamed the car the Tiki. About 12 Tiki bodies were made.[30][31]

Fraser

Main article: Fraser Clubman

Fraser Clubman is a component based car similar to a Lotus Seven Series 3, built in Auckland, New Zealand by Fraser Cars Ltd.[32][33] Scott and Ida Tristram are the current Managing Directors of Fraser Cars having taken over the company from Neil Fraser in 2006.[34]

GT40 New Zealand

A Lower Hutt company based in Wingate that advertise as making Ford GT40 kits for NZ$75,000, excluding the engine. The company may be defunct as the address is currently a wool yarn factory.[35]

GT40 Replication Limited

GT40

In 1987 Phil Ware formed a syndicate to acquire moulds and basic kit from the United Kingdom. Returning to England Ware approached GT40 kit car manufacturer KVAs owner Ken Attwell about acquiring moulds to produce GT40's in New Zealand. Agreement was reached with Attwell selling a disused set of moulds. KVA had taken its moulds from a genuiine Mk 1 GT40. A KVA Ctype chassis was also purchased to be used as the chassis design for Wares Ford GT40 replicas. After the initial 10 car bodies were built, Ware was approached by a number of people wanting to acquire one. He formed GT40 Replication Limited for that purpose and had Replicar Developments improve the mould quality. Replicar were building kit car bodies called Ibis which were designed for Mini's and later the Wasp, a car of their own design. John Simpson, a specialist automotive engineer, improved the GT40s suspension and chassis. In total 35 kits (including the initial 10) in total were sold, some turnkey. David Harvey acquired the business from Ware in 2002.[7] Harveys holding company was Nelson based GT 40 NZ Limited. This was renamed in May 2010 as GT40 & Lola Parts Limited.[36]

Graham Berry Race Cars Ltd

Graham Berry Race Cars developed the chassis for Almac's Cobra replicas. In 2004 Colin Welch acquired the company from Berry and has continued to work with Almac. GBRC also builds hotrods, specialised racing cars and jetsprint boats. The company specialises in chassis fabrication and suspension work.[37]

Heron

Heron MJ 1 2+2 coupe
Main article: Heron Cars

Heron Cars were racing cars, sports and kit cars built in New Zealand between 1962 and 1999 by Ross Baker. They also included a one-off electric car.[38]

Ibis and Wasp

In the late 1980s, in Auckland, New Zealand, a few cars called the Ibis Berkeley were made by Ian Byrd and Tim Monck-Mason. They had used a wrecked Berkeley S328 body, which they widened by six inches and modified as the basis for a mould. After they had made a few mould themselves they had Rob Trainor and Bruce Stratton of Replicar Developments Limited Ardmore make the bodies. Mini front and rear sub-frames were used. Byrd and Monck-Mason sold the bodies as replacement bodies for Minis They were advanced small sports cars that used carbon fibre and foam beams. In total 6 to 10 kits were sold between 1987 and 1989. Some of these were sold to Japan. [39] Replicar developed a new body, the Wasp which was styled after the AC Cobra.[7]

In 1990 they sold the moulds to a Nelson company that was specialising in sending Mini's to Japan. Some Ibis and Wasp bodied cars had already been sold there. By 1994 6 Wasps had been sold with 4 of these going to Japan.[7]

Jarvie and Corsair

a fibre-glass bodied sports car designed and built by Brian Jarvie between 1956 and 1958. Twelve bodies were made by Jarvie and a further three by Reinforced Plastics Ltd of Penrose, Auckland in the early 1960's. Reinforced Plastics remodeled the car and in 1962 marketed it as the Corsair. They only made the one before selling the moulds to Gordon Jones. Jones made two more before Ford objected to the Corsair name being used.[7]

Leitch

Main article: Leitch Super Sprint

The Leitch Super Sprint is a Lotus Seven replica made by Leitch Motorsport and Restoration, Ltd, in Invercargill, New Zealand.

Lynx

A Lotus 7 replica made by Bill Lynch between 1985 and 1988. 12 kits were sold.[7]

MacGregor Motorsport Limited

McGregor Motorsport Limited is a Christchurch, New Zealand kit car manufacturer that specialises in cars based on the Lotus Seven named the McGregor Mark 7. The company was formed in October 2001 by John McGregor as McGregor Motorsport Holdings Limited. In July 2007 Robert Snow and Mark Roberts took over from McGregor.[40]

Manx Beach Buggies and Platinum Spyder

Following Bruce Meyers Meyers Manx design, Louis Trewick began building beach buggies in New Zealand in the 1960's. He sold his moulds to Rob Schrickel, an Auckland based manufacturer in 1974. 35 had been sold by 2012. As at 2016 the Manx remains in production.[7][41] The long wheelbase and 2+2 moulds were acquired from Gemini Plastics in 2005. The 2+2 was possibly a Supertune mould and the long wheelbase a Daytona. Called the Manx 2+2, six of them were sold between 2004 and 2006.[7]

Schrickel had made a Porsche 356 Spyder replica called the Platinum Speedster between 1993 and 2003. 12 were sold of which 6 were turnkey.[42]

Mararn

Manta Monage on which the Mararn is based

Graham McRae imported a replica McLaren M6B made by US based Manta Cars and called the Montage. McRae approached David Harrod of Fibreglass Developments Limited (FDL) of Bunnythorpe in the late 1970's to make a mould of the Montage. McRae intended to build and sell the cars in New Zealand. Harrod set about making the moulds and redesigned the doors, front headlight position, lowered the seat mounts. McRae sold his interest to Harrod as he had been offered a mechanic position with US Skoal Bandit racing team of Paul Newman. McLaren were approached for consent to build the car as its design was subject to their patents. They refused, but as their patent ran out in 1981 Harrod was free to build and sell the cars. A total of 37 cars were built with 4 being sold in Australia. Harrod left for Australia in 1982 and Steve Bond took over.[7]

In 1985 Kent Taylor-Reid of Gemini Plastics obtained a franchise from FDL to make the Mararn. Four cars were made by Gemini. In 1998 the moulds were sold to Bruce Turnbull. In 2005 he sold the moulds to a Dutch kit car collector.[7]

Mistral

Main article: Microplas

A British kitcar brought to New Zealand by Christchurch boat builder and racing driver, Bob Blackburn. Blackburn, and manufactured by Weltex Plastics Limited. The car used a Graeme Dennison designed chassis. Originally intended as a production car, a lack of parts meant it was sold only sold as a kit car. About 10 cars were completed by Weltex and 10 bodies sold between 1956 and 1961.[43] A Dunedin company, Emslie and Flockton Limited, also made and sold the Mistral under licence after Blackburn had moved to Australia, possibly with Weltex's mould.[44][45] A number of these cars are still in existence and Emslie and Flockton's mould is also believed to still exist.[46] One of the Weltex Mistral bodies was fitted to the Stanton Special, which set the New Zealand land speed record at that time.[47]

In 1989 a New Zealander, Roger Wilson, established Wilson Classics Sports Cars with the aim of building Mistral sports cars for use in classic car racing and for touring. A set of moulds were taken to modernise the original Mistral body. Several of the cars were built and successfully raced but demand was insufficient for a sustainable business and the venture ended.[48]

Robertson Engineering

From 1988 to 1990 Jim Robertson sold 6 Lotus 11 replicas called the Lotas 11. In 1989 Robertson introduced a new model called the Panache, By 1992 when production ended 8 cars had been sold. Of these 6 were similar in design to the Lotus 7 but more streamlined and the remaining 2 had a single mould sports car body.[7]

RWC Cobra

Wilson's Classic Sports Cars was established in 1989 by Roger Wilson with the aim of making a non macho sports car. He started with an old Mistral kit car which he tidied up and had a set of mould made from. One car was made - racing number 360. He commenced making a production prototype based on the AC Cobra. Six cars were made before production commenced in 2008. As at 2012 10 had been made. The car was priced at NZ$95,000 as a turn-key in 2016.[7][49]

Saker

Saker
Main article: Saker Cars

Saker Sports Cars were designed and built in Feilding, New Zealand by Bruce Turnbull of Turnbull Engineering from 1989 to the present day. Turnbull has been providing technical assistance in the development of the Hulme F1.[50] Since 2002 Sakers were also being built and designed in Etten-Leur, Netherlands.

Scorpion

A Eureka styled car made in Whangarei by Brian Hepps between 1984 and 1986. The Scorpion had been created using a mould taken of a Purvis Eureka. In total only 5 were made.[7]

Sam Lyle

Alfa Romeo 6C 2300B on which the SL is modelled

Sam Lyle of Gisborne built replicas of the 1938 Alfa Romeo Millie Miglia Spyder between 1999 and 2003 named the SL. A total of 5 were built. Lyle also built a Jaguar XK120 racing car and coupe called the Saluki or Sonic 40.[7]

Taipan

A small sports car originally made by Cook Brothers using a Volkswagen floor pan. In 1983 Peter Clapham of Fibreglass Daytona Limited acquired the moulds. 30 kits were made by Cook Brothers and another 17 by Daytona. Six of the Daytona made cars were targa topped. In 1991 Daytona sold the moulds to a person from Rotorua.[24]

Tempero

The Tempero family started a coach-building company in 1946. In recent time, based at Oamaru, they have produced hand made replica Jaquar C and D-Types, XJ13 and XK180, Aston Martin DBR2, 1953 Maserati A6GCS Pinin farina Bertietta, and Ferrari 250TR and California spiders. Temperos also restore early model cars.[51]

Tom Morland Limited

Tom Morland of Tom Morland Limited of Christchurch specialised in making various replica kit cars.[52] He made a replica Pontiac Firebird body designed for a Holden HQ chassis. These were sold between 1978 and 1992. In all 83 were made.

A De Tomaso Pantera was made from 1983 to 1990. 14 were made. Corvettes were made from 1986 to 1990. 20 kits were sold. TWR Jaguars were made from 1987 to 1990, Porsche 944's from 1987 to 1990, and Lamborghini Countachs from 1987 to 1990. 8 Countach kits were made.[7]

Tron Exotic Industries

John Stewart and Tony Miller of Tron Exotic built a Countach replica called the Trontach between 1988 and 1997. They were expensive - about $200,000 and only 4 were built. The followed this between 1990 and 1997 with the Mountach, which was more successful with 13 turnkey models sold. The Mountach used series 1 to 3 Mazda RX7 as the donor car. By 1997 the Mountach cost NZ$45,000 and was competing in a market where comparable Japanese sports cars were selling for NZ$25,000. The company was placed in voluntary liquidation.[53]

TULL Sambar

A small farm vehicle built on a Subaru Leone chassis between 1992 and 2001. Of the 18 built the last one built was sold to the British High Commission and for a time became the only vehicle on Pitcairn Island.[54]

Wilco

A Lotus 7 replica built by Robin and Gary Wilkinson between 1992 and 1996. In total 13 were made.

Clubs and Associations

Constructors Car Club

The Constructors Car Club was founded in 1988 to support those who had an interest in building cars from scratch, including kit cars. The club is member of the Low Volume Vehicle Technical Association (LVVTA), the body entrusted with New Zealand’s modified and custom built vehicle certification system.[55]

Low Volume Vehicle Technical Association

The Low Volume Vehicle Technical Association (LVVTA) was set up in 1990 to create the standards, provide training, and support to the LVV Certifiers and produce the LVV plates in response to the Ministry of Transport's (now Land Transport New Zealand)requirement that all new vehicles meet certain safety standards. Because hobbiests and small manufacturers were unable to meet the requirements set for major manufacturers the LVVTA was tasked with ensuring, within the bounds of such low volume production, safety standards were set and met by all low volume vehicles. Oversight is provided by the New Zealand Government's Land Transport New Zealand.[56]

Current

Many of the above manufacturers remain in business, but generaly only because of their other lines of work. The demand for kit and replica cars is low. The New Zealand motor vehicle registration statistics 2013 had 2 new Almacs registered between 2008 and 2012, 1 Countess in 2008, and 12 Frasers between 2008 and 2012. There may have been more with a total of 5 custom built, 3 home built, and 415 factory built cars not identified by make between 2008 and 2013.[57]

Other sources

References

  1. ↑ Historic Racing Cars of New Zealand, Graham Vercoe, Reed Books, Auckland 1991, ISBN 0-7900-0189-6
  2. ↑ Southland made Jaguars headed to England, The Southland Times, 13 February 2015
  3. ↑ New Zealand made cars feature in book, Jeff Hampton, 12 October 2013, retrieved 4 April 2015
  4. ↑ "Kit Car Manufacturers". autosource.co.nz. 2011. Retrieved 31 August 2011.
  5. ↑ Tim Nevison (19 March 2009). "2004 Almac Sabre S2". NZ Classic Car. Photos by Jared Clark. Retrieved 31 August 2011.
  6. ↑ Kit Car Directory, New Zealand Classic Car, April 2009, Auckland, page 53, ISSN 1170-9332
  7. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Patric Harlow, New Zealand Manufactured Cars - A cottage industry, Willsonscott Publishing International Ltd, Christchurch, ISBN 978 1 877427 51 0
  8. ↑ NZ Classic Car Magazine Issue 1, 28 August 2001
  9. ↑ http://web.archive.org/web/20160201092249/http://www.constructorscarclub.org.nz/profiles/profile-kevinhun.html. Archived from the original on February 1, 2016. Retrieved January 25, 2016. Missing or empty |title= (help)
  10. ↑ Redline Roadsport – Redline Fury – 176, 11 October 2007, NZ Classic Car
  11. ↑ 1955/6 Ashley 750 Cantwell Puma Sports No.1 retrieved 4 March 2016
  12. ↑ http://web.archive.org/web/20160123081002/http://www.business.govt.nz/companies/app/ui/pages/companies/. Archived from the original on January 23, 2016. Retrieved January 25, 2016. Missing or empty |title= (help)
  13. ↑ NZ Cars, blog on 01-29-2014, 02:47 AM #203 by Patrick Harlow
  14. ↑ Sonata Laboratories Special, Posted on October 5, 2014 by Geoffrey Hacker, retrieved 4 March 2016
  15. ↑ Dave Brown model just like the original, Ssalina Ghazally, 08/10/2009, retrieved 31/3/2016
  16. ↑ Ford GT40 - Kit Carchives, Harold Pace, 20 August 2008, retrieved 31 March 2016
  17. ↑ Sharp idea fills gap in shearing market, HB Country Scene, July 2006
  18. ↑ "Welcome kitcarconnection.com - BlueHost.com". Kitcarconnection.com. Retrieved 2016-01-27.
  19. ↑ "View topic - Know anything about this Countach kit? (Countess)". Kitcentral.com. Retrieved 2016-01-27.
  20. ↑ New Zealand Companies Office companies register
  21. ↑ David Short, retieved 4 March 2016
  22. ↑ http://www.stuff.co.nz/motoring/customs-classics/66118136/Southland-made-Jaguars-headed-to-England Southland made Jaquars head to England}, Georgia Weaver, Last updated 08:57, February 13, 2015, retrieved 4 March 2016
  23. ↑ Coventry Classics website retrieved 4 March 2016
  24. 1 2 Clapham Musings, Spare Parts magazine, Issue 5 Volume 17, Constructors Car Club (Inc), Wellington, page 21
  25. ↑ Dixon 1980 to 1982, 1986 to 1988, Patrick Harlow, Spare Parts magazine, Vol 25 Issue 3, Constructors Car Club (Inc), April 2012, pages 12-16
  26. ↑ Purivs Eureka, Ken McAdam, Constructors Car Club Inc, retrieved 5 March 2016
  27. ↑ http://www.constructorscarclub.org.nz/pdfs/2013_02__feb.pdfCached
  28. ↑ About Exocet NZ, retrieved 31 March 2016
  29. ↑ Kit set Exocet a real head turner, Ben Selby, New Zealand Herald, 20 February 2014, retrieved 31 March 2016
  30. ↑ Tiki: not quite a Kiwi icon, Patrick Harlow, Spare Parts, November 2015, Issue 10, Volume 28, pages 13-17
  31. ↑ New Zealand manufactured cars, Patrick Harlow, Spare Parts, June 2015, Issue 5, Volume 28, pages 13-17
  32. ↑ http://web.archive.org/web/20120504232245/http://www.fraser.co.nz/0.htm. Archived from the original on May 4, 2012. Retrieved January 25, 2016. Missing or empty |title= (help)
  33. ↑
  34. ↑ "About Us – Lotus 7 Replica | Fraser Cars". Fraser.co.nz. Retrieved 2016-01-27.
  35. ↑ Website, retrieved 31 March 2016.
  36. ↑ Registered Company - GT40 & LOLA PARTS LIMITED (1258483), New Zealand Companies office, search 7 March 2016
  37. ↑ Kiwi race cars, retrieved 31 March 2016
  38. ↑ "Heron Cars". Heron Cars. Retrieved 2016-01-27.
  39. ↑ Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN 1-57958-293-1.
  40. ↑ New Zealand Companies register - McGregor Motorsport Holdings Limited and McGregor Motorsport Limited
  41. ↑ Rob Schrickels Manx Buggy, Constructors Car Club, retrieved 9 March 2016
  42. ↑ Rob Schrickel's Speedster, Constructors Car Club, retrieved 9 March 2016
  43. ↑ Historic Racing Cars of New Zealand, Graham Vercoe, Reed Books, Auckland, 1991, ISBN 0-7900-0189-6
  44. ↑ http://web.archive.org/web/20120426065450/http://www.cobra.racing.org.nz/roger_extra.htm. Archived from the original on April 26, 2012. Retrieved January 26, 2016. Missing or empty |title= (help)
  45. ↑ New Zealand Classic Car magazine, April 2009, page 039
  46. ↑ "Other | Vintage parts". Trade Me. Retrieved 2016-01-27.
  47. ↑ The Origin on the Sepecies, Classic Driver Magazine, New Zealand, Number 21 Page 120
  48. ↑ "Roger". Cobra.racing.org.nz. Retrieved 2016-01-27.
  49. ↑ Wilson Classic Sports Cars website - retrieved 10 March 2016
  50. ↑ "Bruce Turnbull - Technical and Pre-Production Engineering | Hulme Supercars Ltd". Hulmesupercars.com. Retrieved 2016-01-27.
  51. ↑ Tempero, website, retrieved 10 MArch 2016
  52. ↑ Tom Morland, Partick Harlow, Spare Parts, December 2010, Issue 11 Volume 23, Constructors Car Club, Lower Hutt, pages 34-44
  53. ↑ Tron Trantach 1988-1997 and Tron Mountach 1990-1997, Patrick Harlow,Spare Parts, Constructors Car Club magazine, Lower Hutt, Issue 11 Volume 25, December 2012, paes 16-23
  54. ↑ Spare Parts, Magazine of the Constructors Car Club, Lower Hutt, Issue 4, Volume 28, pages 8-9
  55. ↑ Constructors Car Club, About - retrieved 1 February 2016
  56. ↑ LVVTA history, retrieved 1 February 2016
  57. ↑ NZ Transport Agency, published February 2014, ISSN 0114-7234

External links

This article is issued from Wikipedia - version of the Tuesday, May 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.