Load/store architecture

In computer engineering, a load/store architecture divides instructions into 2 categories: memory access (load and store between memory and registers), and ALU operations (which only occur between registers); [1]

RISC systems such as PowerPC, SPARC, RISC-V, ARM or MIPS use the load/store architecture.[1]

For instance, in a load/store approach both operands for an ADD operation must be in registers. This differs from a register memory architecture (used by CISC designs such as x86) in which one of the operands for the ADD operation may be in memory, while the other is in a register.[1]

The earliest example of a load/store architecture was the CDC 6600.[2] Almost all vector processors use the load/store approach.[3]


See also

References

  1. 1 2 3 Computer architecture: pipelined and parallel processor design by Michael J. Flynn 1995 ISBN 0867202041 pages 9-12
  2. ↑ Computer architecture: pipelined and parallel processor design by Michael J. Flynn 1995 ISBN 0867202041 pages 54-56
  3. ↑ Memory systems and pipelined processors by Harvey G. Cragon 1996 ISBN 0867204745 pages 512-513
This article is issued from Wikipedia - version of the Monday, April 18, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.