Magnetic domain

Microcrystalline grains within a piece of NdFeB (the alloy used in neodymium magnets) with magnetic domains made visible with a Kerr microscope. The domains are the light and dark stripes visible within each grain.

A magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction. When cooled below a temperature called the Curie temperature, the magnetization of a piece of ferromagnetic material spontaneously divides into many small regions called magnetic domains. The magnetization within each domain points in a uniform direction, but the magnetization of different domains may point in different directions. Magnetic domain structure is responsible for the magnetic behavior of ferromagnetic materials like iron, nickel, cobalt and their alloys, and ferrimagnetic materials like ferrite. This includes the formation of permanent magnets and the attraction of ferromagnetic materials to a magnetic field. The regions separating magnetic domains are called domain walls, where the magnetization rotates coherently from the direction in one domain to that in the next domain. The study of magnetic domains is called micromagnetics.

Development of domain theory

Magnetic domain theory was developed by French physicist Pierre-Ernest Weiss[1] who, in 1906, suggested existence of magnetic domains in ferromagnets.[2] He suggested that large number of atomic magnetic moments (typically 1012-1018) were aligned parallel. The direction of alignment varies from domain to domain in a more or less random manner, although certain crystallographic axis may be preferred by the magnetic moments, called easy axes. Weiss still had to explain the reason for the spontaneous alignment of atomic moments within a ferromagnetic material, and he came up with the so-called Weiss mean field. He assumed that a given magnetic moment in a material experienced a very high effective magnetic field due to the magnetization of its neighbors. In the original Weiss theory the mean field was proportional to the bulk magnetization M, so that

H_e = \alpha\ M

where  \alpha\ is the mean field constant. However this is not applicable to ferromagnets due to the variation of magnetization from domain to domain. In this case, the interaction field is

H_e = \alpha\ M_s

Where M_s is the saturation magnetization at 0K.

Later, the quantum theory made it possible to understand the microscopic origin of the Weiss field. The exchange interaction between localized spins favored a parallel (in ferromagnets) or an anti-parallel (in anti-ferromagnets) state of neighboring magnetic moments

Different types of magnetism

Magnetic domains form in materials which have magnetic ordering; that is, their dipoles spontaneously align due to the exchange interaction. These are the ferromagnetic, ferrimagnetic and antiferromagnetic materials. Paramagnetic and diamagnetic materials, in which the dipoles align in response to an external field but do not spontaneously align, do not have magnetic domains.

Domain structure

How dividing a ferromagnetic material into magnetic domains reduces the magnetostatic energy

Why domains form

The reason a piece of magnetic material such as iron spontaneously divides into separate domains, rather than exist in a state with magnetization in the same direction throughout the material, is to minimize its internal energy.[3] A large region of ferromagnetic material with a constant magnetization throughout will create a large magnetic field extending into the space outside itself (diagram a, right). This requires a lot of magnetostatic energy stored in the field. To reduce this energy, the sample can split into two domains, with the magnetization in opposite directions in each domain (diagram b right). The magnetic field lines pass in loops in opposite directions through each domain, meister meister meister the field outside the material. To reduce the field energy further, each of these domains can split also, resulting in smaller parallel domains with magnetization in alternating directions, with smaller amounts of field outside the material.

The domain structure of actual magnetic materials does not usually form by the process of large domains splitting into smaller ones as described here. When a sample is cooled below the Curie temperature, for example, the equilibrium domain configuration simply appears. But domains can split, and the description of domains splitting is often used to reveal the energy tradeoffs in domain formation.

Size of domains

As explained above, a domain which is too big is unstable, and will divide into smaller domains. But a small enough domain will be stable and will not split, and this determines the size of the domains created in a material. This size depends on the balance of several energies within the material.[3] Each time a region of magnetization splits into two domains, it creates a "domain wall" between the domains, where magnetic dipoles (molecules) with magnetization pointing in different directions are adjacent. The exchange interaction which creates the magnetization is a force which tends to align nearby dipoles so they point in the same direction. Forcing adjacent dipoles to point in different directions requires energy. Therefore a domain wall requires extra energy, called the "Domain wall energy", which is proportional to the area of the wall.

Thus the net amount that the energy is reduced when a domain splits is equal to the difference between the magnetic field energy saved, and the additional energy required to create the domain wall. The field energy is proportional to the cube of the domain size, while the domain wall energy is proportional to the square of the domain size. So as the domains get smaller, the net energy saved by splitting decreases. The domains keep dividing into smaller domains until the energy cost of creating an additional domain wall is just equal to the field energy saved. Then the domains of this size are stable. In most materials the domains are microscopic in size, around 10−4 - 10−6 m .[4]

Magnetic anisotropy

Micrograph of surface of ferromagnetic material, showing the crystal grains, each divided into several domains parallel to its "easy" axis of magnetization, with the magnetization in alternating directions (red and green areas).
Animation showing how magnetostriction works. A changing external magnetic field causes the magnetic dipoles to rotate, changing the dimensions of the crystal lattice.

An additional way for the material to further reduce its magnetostatic energy is to form domains with magnetization at right angles to the other domains (diagram c, right), instead of just in opposing parallel directions.[3] These domains, called flux closure domains, allow the field lines to turn 180° within the material, forming closed loops entirely within the material, reducing the magnetostatic energy to zero. However, forming these domains incurs two additional energy costs. First, the crystal lattice of most magnetic materials has magnetic anisotropy, which means it has an "easy" direction of magnetization, parallel to one of the crystal axes. Changing the magnetization of the material to any other direction takes additional energy, called the "magnetocrystalline anisotropy energy".

Magnetostriction

The other energy cost to creating domains with magnetization at an angle to the "easy" direction is caused by the phenomenon called magnetostriction.[3] When the magnetization of a piece of magnetic material is changed to a different direction, it causes a slight change in its shape. The change in magnetic field causes the magnetic dipole molecules to change shape slightly, making the crystal lattice longer in one dimension and shorter in other dimensions. However, since the magnetic domain is "squished in" with its boundaries held rigid by the surrounding material, it cannot actually change shape. So instead, changing the direction of the magnetization induces tiny mechanical stresses in the material, requiring more energy to create the domain. This is called "magnetoelastic anisotropy energy".

To form these closure domains with "sideways" magnetization requires additional energy due to the aforementioned two factors. So flux closure domains will only form where the magnetostatic energy saved is greater than the sum of the "exchange energy" to create the domain wall, the magnetocrystalline anisotropy energy, and the magnetoelastic anisotropy energy. Therefore most of the volume of the material is occupied by domains with magnetization either "up" or "down" along the "easy" direction, and the flux closure domains only form in small areas at the edges of the other domains where they are needed to provide a path for magnetic field lines to change direction (diagram c, above).

Grain structure

The above describes magnetic domain structure in a perfect crystal lattice, such as would be found in a single crystal of iron. However most magnetic materials are polycrystalline, composed of microscopic crystalline grains. These grains are not the same as domains. Each grain is a little crystal, with the crystal lattices of separate grains oriented in random directions. In most materials, each grain is big enough to contain several domains. Each crystal has an "easy" axis of magnetization, and is divided into domains with the axis of magnetization parallel to this axis, in alternate directions.

"Magnetized" states

It can be seen that, although on a microscopic scale almost all the magnetic dipoles in a piece of ferromagnetic material are lined up parallel to their neighbors in domains, creating strong local magnetic fields, energy minimization results in a domain structure that minimizes the large-scale magnetic field. The domains point in different directions, confining the field lines to microscopic loops between neighboring domains, so the combined fields cancel at a distance. Therefore a bulk piece of ferromagnetic material in its lowest energy state has little or no external magnetic field. The material is said to be "unmagnetized".

However, the domains can also exist in other configurations in which their magnetization mostly points in the same direction, creating an external magnetic field. Although these are not minimum energy configurations, due to a phenomenon where the domain walls become "pinned" to defects in the crystal lattice they can be local minimums of the energy, and therefore can be very stable. Applying an external magnetic field to the material can make the domain walls move, causing the domains aligned with the field to grow, and the opposing domains to shrink. When the external field is removed, the domain walls remain pinned in their new orientation and the aligned domains produce a magnetic field. This is what happens when a piece of ferromagnetic material is "magnetized" and becomes a permanent magnet.

Heating a magnet, subjecting it to vibration by hammering it, or applying a rapidly oscillating magnetic field from a degaussing coil, tends to pull the domain walls free from their pinned states, and they will return to a lower energy configuration with less external magnetic field, thus "demagnetizing" the material.

Landau-Lifshitz energy equation

Electromagnetic dynamic magnetic domain motion of grain oriented electrical silicon steel
Moving domain walls in a grain of silicon steel caused by an increasing external magnetic field in the "downward" direction, observed in a Kerr microscope. White areas are domains with magnetization directed up, dark areas are domains with magnetization directed down.

The contributions of the different internal energy factors described above is expressed by the free energy equation proposed by Lev Landau and Evgeny Lifshitz in 1935,[5] which forms the basis of the modern theory of magnetic domains. The domain structure of a material is the one which minimizes the Gibbs free energy of the material. For a crystal of magnetic material, this is the Landau-Lifshitz free energy, E, which is the sum of these energy terms:[6]

E = E_{ex} + E_D + E_{\lambda} + E_k + E_H\,    

where

Some sources define a wall energy EW equal to the sum of the exchange energy and the magnetocrystalline anisotropy energy, which replaces Eex and Ek in the above equation.

A stable domain structure is a magnetization function M(X), considered as a continuous vector field, which minimizes the total energy E throughout the material. To find the minimums a variational method is used, resulting in a set of nonlinear differential equations, called Brown's equations after William Fuller Brown Jr. Although in principle these equations can be solved for the stable domain configurations M(X), in practice only the simplest examples can be solved. Analytic solutions do not exist, and numerical solutions calculated by the finite element method are computationally intractable because of the large difference in scale between the domain size and the wall size. Therefore micromagnetics has evolved approximate methods which assume that the magnetization of dipoles in the bulk of the domain, away from the wall, all point in the same direction, and numerical solutions are only used near the domain wall, where the magnetization is changing rapidly.

Rotation of orientation and increase in size of magnetic domains in response to an externally applied field.

Observing domains

There are a number of microscopy methods which can make the magnetization at a surface of a magnetic material visible, revealing the magnetic domains. Each method has a different application because not all domains are the same. In magnetic materials, domains can be circular, square, irregular, elongated, and striped, all of which have varied sizes and dimensions. Large domains, within the range of 25-100 micrometers can be easily seen by Kerr microscopy, which uses the magneto-optic Kerr effect, which is the rotation of the polarization of light reflected from a magnetized surface. Smaller domains, down to the scale of a few nanometers, can be viewed by the use of magnetic force microscopy.

Bitter patterns are a technique for imaging magnetic domains that were first observed by Francis Bitter.[7] The technique involves placing a small quantity of ferrofluid on the surface of a ferromagnetic material. The ferrofluid arranges itself along magnetic domain walls, which have higher magnetic flux than the regions of the material located within domains. A modified Bitter technique has been incorporated into a widely used device, the Large Area Domain Viewer, which is particularly useful in the examination of Grain Oriented Silicon Steels.[8]

Magnetooptical images of different domain structures
Domain structure of a shape-memory alloy (recorded using CMOS-MagView)
Domain structure of a shape-memory alloy (recorded using CMOS-MagView)
Domain structure of a examplary meander domain (recorded using CMOS-MagView)
Domain structure of an examplary meander domain (recorded using CMOS-MagView)
Domain structure of a examplary bubble domain (recorded using CMOS-MagView)
Domain structure of an examplary magnetic bubble domain (recorded using CMOS-MagView)

See also

References

  1. P. Weiss (1906) La variation du ferromagnetisme du temperature, Comptes Rendus, 143, p.1136-1149, cited in Cullity, 2008, p.116
  2. Cullity; C. D. Graham (2008). Introduction to Magnetic Materials, 2nd ed. New York: Wiley–IEEE. p. 116. ISBN 0-471-47741-9..
  3. 1 2 3 4 Feynman, Richard P.; Robert B. Leighton; Matthew Sands (1963). The Feynman Lectures on Physics, Vol. II. US: California Inst. of Technology. pp. 37.5–37.6. ISBN 0-201-02117-X.
  4. https://www.youtube.com/watch?v=SNDqAuxYOQ8#t=895
  5. Dan Wei (28 April 2012). Micromagnetics and Recording Materials. Springer Science & Business Media. ISBN 978-3-642-28577-6.
  6. Carey R., Isaac E.D., Magnetic domains and techniques for their observation, The English University Press Ltd, London, (1966).
  7. A Dictionary of Physics. Oxford University Press, 2009.
  8. R. J. Taylor, A Large area domain viewer, Proceedings of SMM9, 1989

External links

Wikimedia Commons has media related to Magnetic domains.
This article is issued from Wikipedia - version of the Tuesday, April 26, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.